hama 00 200143 USB Multiport Instruction Manual
- June 10, 2024
- Hama
Table of Contents
hama 00 200143 USB Multiport
Product Information
The Hama USB Multiport is a device that allows you to connect multiple peripherals to your laptop or MacBook. It features four USB ports, one HDMI port with a maximum resolution of 3840×2160@60Hz, and one LAN/Ethernet port with a speed of 10/100/1000 Mbps. It also has one USB-C port with a Gen 1 specification and a USB-C PD (power delivery) function.
OVERVIEW
Package Contents
- Hama USB Multiport
- USB-C cable
- Operating instruction manual
Safety Notes
Before using the USB Multiport, it is important to read and follow the safety notes in the instruction manual. Some key safety notes include:
- Do not use the device if it appears to be damaged or if the cable is frayed or damaged in any way.
- Do not expose the device to water or moisture.
- Do not use the device near heat sources.
- Do not attempt to repair the device yourself.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children!Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- The product is intended for indoor use only.
- Do not use the product near heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning
- Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
- Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
- Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Note
- Run USB receivers (radio / 2.4 GHz wireless) if possible directly on the computer/notebook.
- To be able to use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
- To be able to use the HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt-3/4.
- For optimised video function, we recommend passive monitor adapters/cables (without chipset/signal converter).
- *To use the 4K@60Hz resolution, DP1.4 via DisplayPort Alternate Mode is required; Display Stream Compression (DSC) compression technology is supported.
Startup and Operation
- Switch on your computer and boot the system.
- Connect the product to a free USB port on your computer.
- You do not have to install drivers; the computer will automatically recognise the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
Technical Data
- Operating voltage: 5 – 20 V max. 5 A
- Current consumption: USB-C port
- Compatibility: Windows 11/10/8/7, Mac OS 10.8 or later
- USB specification: USB 3.2 Gen1
- USB-C port with power delivery function
Note If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.
Product Usage Instructions
Startup and Operation
To use the Hama USB Multiport, follow these steps:
- Connect the USB-C cable to the USB-C port on the USB Multiport and the USB-C port on your laptop or MacBook.
- Connect your peripherals, such as a mouse, keyboard, or USB drive, to the USB ports on the USB Multiport.
- If you want to connect to the network, connect an Ethernet cable to the LAN/Ethernet port on the USB Multiport.
- If you want to connect to an external display, connect an HDMI cable to the HDMI port on the USB Multiport.
- Turn on your laptop or MacBook.
Note: The USB Multiport is compatible with Windows 11/10/8/7 and Mac OS 10.8 or later.
Warranty Disclaimer
Please note that Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes. Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.
Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>