Progress Lighting P8734-09 5 In White Mixed Material Linear Mono Point Canopy Instruction Manual
- June 10, 2024
- PROGRESS LIGHTING
Table of Contents
Progress Lighting P8734-09 5 In White Mixed Material Linear Mono Point
Canopy
INSTALLATION INSTRUCTION
IF ANY SPECIAL CONTROL DEVICES ARE USED WTH THIS FIXTURE, FOLLOW THE INSTRUCTIONS
WARNING
CAREFULLY TO ASSURE FULL COMPLIANCE WITH N.E.C. REQUIREMENTS. IF THERE ARE ANY
QUESTIONS, CONTACT A QUALIFIED ELECTRICAL CONTRACTOR.
WARNING This product contains chemicals known to the State of California
to cause cancer, birth defects, and /or other reproductive harm. Thoroughly
wash hands after installing, handling, cleaning, or otherwise touching this
product.
- CONNECT SUPPLY GROUND WRE TO MOUNTING PLATE ASSEMBLY WITH GREEN GROUND SCREW. CONNECT WHITE SUPPLY WIRE TO WHTE FIXTURE WIRE. CONNECT BLACK 5UPPLY WRE TO BLACK FXTURE WRE. USE U.L.LISTED WIRENUTS (NAOT FURNISHED) TO MAKE CONNECTIONS.
- FASTEN MOUNTING PLATE ASSEMBLY TO OUTLET BOX WITH MOUNTING SCREWS FROv OUTLET. THREAD STUDS INTO MOUNTING PLATE ASSEMBLY.
- SUIP CANOPY UP OVER STUDIOS WITH RETANGULAR OPENING OVER POWER FEED BL0CK WAKE SURE PLUS (+) SCN. ON CANOPY, IS ON THE SAME SIDE AS PCLARITY TAB SECURE IN PLACE WITH CAPNUTS. DO NOT OVER TIGHTEN. (SEE DETAIL “A) (SEE REVERSE SIDE FOR INSTALLATION OF PR0GRESS LAMP HOLDERS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>