Bezalel Prelude XS Power Adapter User Manual
- June 10, 2024
- BEZALEL
Table of Contents
Bezalel Prelude XS Power Adapter
Product Information
The Prelude XS is a wireless and wired charging power adapter for mobile devices. It has a fold-out AC plug and a USB-C port for charging. It can charge wirelessly with BEZALEL Prelude X or XR (not included) or iPhone charging areas, and via wired charging using a USB-C cable (not included). It is designed to operate with n AC input voltage range of 110-240V and output power of 5W / 7.5W / 10W for wireless charging and 5V 3A, 9V 3A for USB-C output. The product comes with a user manual.
Product Usage Instructions:
- Unfold the AC plug and plug it directly into an AC socket.
- For wireless charging, gently attach BEZALEL Prelude X or XR (not included) or iPhone charging area onto the powered Prelude XS For wired charging, connect the powered Prelude XS to your device with a USB-C cable (not included).
- The wireless charging will start automatically when your device is placed on the charging area. For wired charging, your device will start charging once it is connected to the USB-C port.
- Keep the wireless charging unit dry and away from liquids. Do not use on wet surfaces.
- Do not attempt to disassemble or modify the charger.
- Always disconnect power supply before cleaning charger.
- Keep away from high heat. Use in the temperature specified in the manual.
- If you keep your iPhone in a leather case while charging with your Prelude XS, the case might show imprints from compression of the leather. This is normal, but if you’re concerned about this, we suggest using a non-leather case.
Contact BEZALEL support at support@bezalel.co for any further queries or visit bezalel.co for their full line of wireless charging products.
PRODUCT OVERVIEW
Welcome to Prelude XS
Unfold the AC Plug and plug it directly into the AC socket. Prelude XS is
ready to work.
Charging Your Device with Prelude XS
After the Prelude XS is plugged into the AC socket, you can use it to charge your wireless or non-wireless devices.
Wireless Charging
- Gently attach Prelude X/XR (not included) or iPhone wireless charging area onto the powered Prelude XS.
- Wireless charging in progress!
Wired Charging
- Connect the powered Prelude XS to your device with a USB-C cable (not included).
Safety & Handling
- Keep wireless charging unit dry and away from liquids. Do not use on wet surfaces.
- Do not attempt to disassemble or modify charger.
- Always disconnect power supply before cleaning charger.
- Keep away from high heat. Use in the temperature range between -5 and 40 degrees Celsius (23 and 104 degrees Fahrenheit).
- Don’t place credit cards, security badges, passports or key fobs between your iPhone and Prelude XS. This may damage magnetic strips or RFID chips in those items.
- If you have a case that holds any of these sensitive items, remove them before charging or make sure that they aren’t between the back of your device and Prelude XS.
- Your iPhone or Prelude XS might get slightly warmer while your iPhone charges. To extend the lifespan of your battery, if the battery gets too warm, software might limit charging for only up to 80 percent
- If you keep your iPhone in a leather case while charging with your Prelude XS, the case might show imprints from compression of the leather. This is normal, but if you’re concerned about this, we suggest using a non-leather case.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that nterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Specifications
- Input
- AC 110-240V 0.8A 60Hz
- Wireless Output
- 5W / 7.5W / 10W
- USB-C Output
- 5V 3A, 9V 3A
Package Contents
- Prelude XS Power Adapter
- X1
- User Manual
- X1
THANK YOU FOR YOUR ORDER!
Learn more about BEZALEL and our full line of wireless charging products at
bezalel.co.
Contact us at support@bezalel.co.