BEZALEL Prelude X MagSafe Wireless Power Bank User Manual

Prelude X MagSafe
Wireless Power Bank

Prelude X MagSafe Wireless Power Bank

Welcome to Prelude X

Press and hold the Power Button for about a second and the Power Indicator will light up. Prelude X will go into standby mode for 2 minutes. After that, your Prelude X is ready to go!
Prelude X will automatically turn off if there is no action for 2 minutes or by pressing the Power Button for 3 seconds.
If the battery power is too low for output, the Power Indicator will blink red. Please fully charge it.

| (blinking) O%-10%
---|---
| 10% – 30%
| 30% – 100%

Prelude X as a Stand

The fold-out stand can be unfolded and used as a phone stand.

Charging Prelude X

Fully charge Prelude X before using for the first time.

Wireless Charging
Gently attach Prelude X MagSafe Wireless Charging Area 2 onto powered Prelude XS MagSafe Power Adapter (not included) or any other powered Magsafe
Charger (not included).
*If the Wireless Charging Area 2 was used for output charging, please turn off Prelude X (by pressing the Power Button for 3 seconds) before wirelesss charing it with Prelude XS.

Wireless Charging

Plug the end of USB-C cable into Prelude X USB-C port. Plug the other end of the cable into the power adapter (not included).

• Use PD2.0/AFC/FCP/SCP/PE1.1 USB adapter for improved and fast recharging experience.

Charging Your Device with Prelude X

After the Prelude X is fully charged, you can use it to charge your wireless or non-wireless devices.

Wireless Charging 1

1. Press the Power Button for about a second. Then Power Indicator will light up and Prelude X is ready for use.
2. Gently attach Prelude X MagSafe Wireless Charging Area 1 onto your iPhone MagSafe wireless charging area.

• MagSafe compatible wireless charging for Phone MagSafe series.
  *Wren in the Sandwicn Charging Mode (Prelude X wirelessly charges the iPhone while it is being w relessly charged). Please make sure that Prelude X has more thar 30% battery power (blue light). Only then, the system will charge the iPhone.

Wireless Charging 2

1. Press the Power Button for about a second. Then Power Indicator will light up and Prelude X is ready for use.
2. Gently place your AirPods Case wireless charging area onto Prelude X MagSafe Wireless Charging Area 2.

• For better and improved charging experience and efficiency, while charging the AirPods MagSafe Case on the Wireless Charging Area 2, please aim for the centers of the wireless charging areas as much as possible to avoid possible heat up or pause in charging.
  It is highly recommended to charge the AirPods MagSafe Case on the Wireless Charging Area 1.

Wired Charging

1. Press the Power Button for about a second. Then Power Indicator will light up and Prelude X is ready for use.
2. Connect the Prelude X to your phone with a USB-C cable (not included).

Safety & Handling

1. Keep wireless charging unit dry and away from liquids. Do not use on wet surfaces.
2. Do not attempt to disassemble or modify charger.
3. Always disconnect power supply before cleaning charger.
4. Keep away from high heat. Use in the temperature range between -5 and 45 degrees Celsius (23 and 113 degrees Fahrenheit).
5. Prelude X is designed for faster and more efficient charging with iPhone MagSafe series and Apple MagSafe accessories.
6. When charging a non-MagSafe Gi-compatible device with Prelude X, power is reduced and charging time may be slower than with a typical Gi charger.
7. Don’t place credit cards, security badges, passports or key fobs between your iPhone and Prelude X. This may damage magnetic strips or RFID chips in those items.
8. If you have a case that holds any of these sensitive items, remove them before charging or make sure that they aren’t between the back of your device and Prelude X.
9. Your iPhone or Prelude X might get slightly warmer while your iPhone charges. To extend the lifespan of your battery, if the battery gets too warm, software might limit charging for up until 80 percent only.
10. If you keep your iPhone in a leather case while charging with your Prelude X, the case might show imprints from compression of the leather. This is normal. But if you’re concerned about this, we suggest using a non-leather case.

Specifications

Package Contents

Prelude X MagSafe Wireless Power Bank = x1
USB-C Cable x1
User Manual x1

VE1.8

THANK YOU FOR YOUR ORDER!
Learn more about BEZALEL and our full line of
wireless charging products at bezalel.co.
Contact us at support@bezalel.co.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>