Shantou Flying Technology T20 Glow Stunt Drone User Manual

June 10, 2024
Shantou Flying Technology

Shantou Flying Technology T20 Glow Stunt Drone User Manual

Shantou Flying Technology T20 Glow Stunt Drone User
Manual

GENERAL WARNINGS

SAFETY WARNINGS

  • Not recommended for children under 14 years of age. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electrical shock.
  • Adult supervision is required at all times.
  • Never fly drones above or near people, sudden changes in wind or other conditions could lead to unexpected crashes.
  • Always use caution when flying drone vehicles, obey relevant laws, respect the privacy and property rights of others.
  • The drone shall never be modified or used for anything except its intended purpose.
  • Before each use, an adult should review the product and battery to determine that no damage or hazards exist.
  • DO NOT TOUCH SPINNING PROPELLERS.
  • Use caution and pay attention to your surroundings while operating drone.
  • Do not fly drone into animals, people, or inanimate objects.
  • Keep drone away from power lines, buildings, trees, public areas, and any other potentially hazardous areas.
  • Do not operate in rain, heavy wind, and or ant type of severe weather.
  • Do not land drone on wet surfaces.
  • Never touch or allow others to touch drone while it is flying.
  • Always term drone off when it is not in use.
  • Always fly drone in large open areas.

Fly-always are the responsibility of the individual pilot and will not be replaced by the manufacturer.

SPARE PARTS LIST

Shantou Flying Technology T20 Glow Stunt Drone User Manual - Spare Parts
List

BATTERY INSTALLATION AND CHARGING

  1. Slide open the remote’s battery compartment.
  2. install 3 “AAA’ batteries as shown in the diagram above.
  3. Close battery compartment

BATTERY WARNING – LITHIUM – POLYMER:

There Is a risk of free and personal injury d Lip beanery ts punctu1ed.damage °’ misused.

  • Never expose ba1tery 10 extreme tempera1ures or moisture
  • Do nil suet battery to Stung impacts.
  • Abhay’s keep tottery away from flammable materials
  • Monty” use manufacture speciated butlery(ies),charger(s) and/or adapter,; applicable, specified by lhe manufacturer.
  • Battery is not service.
  • Let battery cool to room temperature before cha1910g
  • Recycle to federal, state and local law. KEEP THIS PACKAGING FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.

BATTERY WARNING:

  • Do not mix old and new batteries.
  • Do nil suet battery to Stung impacts.
  • Abhay’s keep tottery away from flammable materials
  • Not, use manufacture speared beaneries, chargers and/or adapter, , applicable-specified by the,.
  • Juan’s use, replace, and recharge (If applicable) baleens under adult supervision KEEP THIS PACKAGING FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION

Charging Battery

  1. Turn off the drone before charging.
  2. Take off the drone battery and connect the battery charger cable to the charging port on the battery
  3. Connect USS connector to the power source.

Note: The Battery Charger will light up when it is charging the battery and turn off when the battery is fully charged.

BATTERY INSTALLATION

How to install the battery

Shantou Flying Technology T20 Glow Stunt Drone User Manual - How to install
the battery

Open the battery compartment at the bottom, align the socket on the battery with the interface, and connect the battery, remember to insert it correct. Put the battery into the battery compartment and close battery cover, turn the knob tightly, and observe whether the battery compartment is tightly close.

REPLACING PROPELLERS

  • Only an adult should replace blades. To remove, pull up the blades directly.
  • Replace propellers by following the diagram.
  • Each blade spins differently. Blade B spins counter clockwise and Blade A spins clockwise.

REMOTE OVERVIEW

Shantou Flying Technology T20 Glow Stunt Drone User Manual - Remote
Overview

OPERATING DRONE

Shantou Flying Technology T20 Glow Stunt Drone User Manual - Operating
Drone

OPERATION

Shantou Flying Technology T20 Glow Stunt Drone User Manual -
Operation

LIGHT SWITCHING FUNCTION

Shantou Flying Technology T20 Glow Stunt Drone User Manual - Light switching
function

OTHER FUNTION

Headless mode/one button return function

Shantou Flying Technology T20 Glow Stunt Drone User Manual - Headless
mode

Press the Headless Mode button to turn mode on, and then press again to turn headless mode off.

  • In this mode, the drone will always move in the direction in which you press the multidirectional key. No matter which direction the drone faces, it will be oriented to Users (remote control).
  • When in headless mode, the remote control will beep every 6 seconds. Press the emergency stop button in case of emergency.

Automatic return function:
If you want to make the aircraft fly back automatically, please first control the aircraft to the front of the operator, and press the one button return button, the aircraft will fly back automatically.

Tips

  • Do not bump the drone into sand or mud. drone gear may be blocked
  • The first time you learn to fly, practice taking off and hovering.
  • Keep a few feet away from walls and buildings.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals