iStyle LED-AliciaC LED Mirror Cabinet Instruction Manual
- June 10, 2024
- ISTYLE
Table of Contents
iStyle LED-AliciaC LED Mirror Cabinet
Product Information
The LED Mirror Cabinet is a modern and elegant piece of furniture that features LED lights and is perfect for any bathroom or dressing room. It comes in three different sizes: 610 x 813 x 120mm, 762 x 813 x 120mm, and 914 x 813 x 120mm. The mirror cabinet is made of high-quality materials, and it has an anti-fog function, color dimming feature, and a light switch for user convenience. The product comes with an installation guide, tools required for installation, and six wall plugs.
Product Usage Instructions
Before installation, please make sure that there are no obstacles (i.e. electrical cable / water pipework) inside the wall. It is recommended that the product be installed by a professional person with suitable protective equipment.
Installation Procedure
Two persons are required for the correct installation of the product. The following are the steps to install the LED Mirror Cabinet:
- Mark the holes based on the desired location, then drill holes and fix the mounting bar on the wall.
- Put the cabinet on the mounting bar, insert the top clips on the top of the cabinet, and fix it with screws.
- Insert the side kits as shown in the picture, and connect the power wire.
- Adjust the door position accordingly.
It is important to note that this product is a one-way hanging mirror. Please pay attention to the open and closed door position to avoid trapping fingers. Do not use any acidic or alkaline cleanser or alcohol on this product. Please clean with a damp soft cloth. Keep away from water and electricity when hanging on the wall.
Power Cables Position
The input for the power cable is 120v, 50/60Hz. Tear the tape to access the power cable, and connect it to an appropriate outlet.
By following these instructions, you can safely and efficiently install and use the LED Mirror Cabinet. Enjoy your new product!
Mirror diagram
Tools required
Two persons required for correct installation
Before Installation
- Please read these instructions carefully before installation.
- Installation should be only carried out by a qualified professional.
- ENSURE THAT ELECTRICAL CONNECTIONS ARE TURNED OFF AT THE CONSUMER UNIT OR FUSE BOARD BEFORE INSTALLING OR CARRYING OUT ANY MAINTENANCE.
- Please take note of the Tools Required prior to commencement of any installation procedures.
- Follow the Installation Steps on Page 2 to ensure that the correct installation method is adhered to. Please also read all operating and safety instructions before commencing any installation to ensure complete understanding of the installation procedure.
- All information provided by these guidelines are based on the latest technical product information. We reserve the right to change the product characteristics, packaging or supply without prior notice.
- These guidelines include maintenance and cleaning advice.
- THIS PRODUCT IS FOR INDOOR USE ONLY.
- WARNING: There may be hidden dangers to people or product during installing. In order to avoid trapping fingers, please pay attention to the open and closed door position.
- WARNING: Do not use any acidic or alkaline cleanser or alcohol on this product. Please clean with a damp soft cloth.
- WARNING: Keep away from water and electricity when hanging on wall.
- IMPORTANT: This product is a one-way hanging mirror. Please make sure that there are no obstacles (i.e. electrical cable / water pipework) inside the wall before commencing installation procedure.
- WARNING: This product is fragile – it should be installed by a professional person with suitable protective equipment, as listed in the Tools Required above.
Material Statement
- Mirror cabinet 1pc
- Side panel 2pcs
- Holder 4pcs
- Upper bracket 3pcs
- Bottom bracket 1pc
- ST4*35 screw 6pcs
- Wall plus 6pcs
- Screw cap 6pcs
- ST4*8 screw 4pcs
- Cover plate 1pc
Installation Steps
Hanging installation
- Mark holes based on the desired location, then drill holes and fix mounting bar on the wall
- Put the cabinet on the mounting bar, insert the top clips on the top of cabinet, fix it with screw
- Insert side kits as picture ,connect the power wire
- Adjust door position accordingly.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>