bimar VC76.2 Tower Fan Instruction Manual

: June 10, 2024
: bimar

Table of Contents

bimar VC76.2 Tower Fan
Product Information
Product Usage Instructions
Cleaning and Maintenance
GENERAL NOTICES
INSTALLATION
ASSEMBLY
USE
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

bimar VC76.2 Tower Fan

Product Information

Product Name : Tower Fan
Model Number: VC76.2 (mod. YH-32TA)
Manufacturer: Bimar Italy

Product Usage Instructions

Before using the product, carefully read the instruction booklet and keep it for future reference.
Avoid inserting any tools or fingers between the fan guard.
Keep the product out of reach of children.
Follow basic safety precautions when using electrical appliances to avoid the risk of fire, electric shock, and physical injury.
Do not allow the fan to come into contact with water or other liquids. If it accidentally gets wet or immersed in liquid, first turn off the power switch and unplug it from the socket. Dry it carefully before reactivating the power supply.
Do not use the product near flammable gases, vapors, mist, or dust, as it may cause combustion in the air.
The product must be placed on a stable and flat surface. Do not place it on shelves or hang it on the wall.
If the product malfunctions, turn it off and have it checked by qualified personnel.

Cleaning and Maintenance

Before cleaning the product, unplug it from the socket. Use a soft damp cloth to clean it, and do not use abrasive products.
Note : The instructions, installation, use, cleaning, and maintenance of the product may be updated from time to time. Please refer to the manufacturer’s website for the latest version of the instruction booklet. If you have any difficulties understanding the instructions, contact the manufacturer before using the product.

Please read these instructions carefully before using the appliance, and instruct other persons using it, too, when necessary. Keep booklet Handy for further use.
If when reading this instructions manual certain parts should remain difficult to understand, or if there is any confusion, contact the company indicated on the last page before using the product.
This symbol show: the appliance is class II equipment, for which the power cord plug is without of the pole to the ground.
This symbol highlights instructions and precautions for safe use. Warnings and appliance installation, use, cleaning and maintenance procedures may be updated slightly from those described in this manual; for further details, please consult the updated online manual at www.bimaritaly.it.

GENERAL NOTICES

This device is intended for home use only, to ventilate rooms, and in the manner described in this manual donotuse it for any other purpose Attention: the fan can only be used if complete with the support base (front and rear shel).
Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be hed responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorized persons. This appliance is intended to beusedin households and similar applications as
- staff kitchen in shops, offices andotherworkingenvironments
- bodies in hotels, motels, and other residential-type environments
- bed and breakfast type environments,farmhouses
Donotinsertary too, or your fingers into the grille protecting the blades.
This appliance can be used by children aged 8 yeas and above and persons with reduced physical, sensory or mental capabilities or ladk of experience and knowledge if they have been given supervision or instruction Conceming use of the appliance safely and if they understand the hazards invoved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
The appliance must be kept out of children’s reach
Attention when using electric appliances, the basic safety precautions must always be observed to avoid risks of fire, electric shocks, and physical injury. Aways unplug the appliance before you assemble, disassemble or clean the appliance
Do not use the appliance if it is not operating correctly or seems damaged, if in doubt, contact professionally qualified personnel.
Make sure that the appliance is working correctly if not, tum the appliance off and have it checked by professionally qualifed personnel
Check that the fan does not come into contact with water or other liquids. If it is accidentally wet or immersed in a liquid, first disconnect the power supply by turning off the control panel switch, and only then remove the plug from the power socket. Dry both the plug and the power socket carefully before reactivating the power socket. Reconnect the plug to the power socket and then use the appliance. If in doubt, call in qualified staff.
Do not move the appliance when it is operating
Unplug the appliance when not in use
Do not leave the device exposed to the weather (sun, rain, etc)
Do not touch the appliance with wet hands or feet
Do not pull on the cord to move the appliance
Do not pull on the cord to disconnect the plug from the socket
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiried persons in order to avoid hazard Do not use the appliance with a timer or a programmer or with a system that can switch on the appliance automatically, to avoid risk of fire, since a fire risk exists if the appliance is covered or positioned incorrectly.

INSTALLATION

After removing the packing materials, check the integrity of the appliance; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger.
All packaging elements must be disposed of according to their raw material (see the symbol stamped on each one) and according to the provisions of their municipality. The bag containing the base or screws, which is unmarked due to its small size, therefore you have to follow the procedures for the disposal of their municipality.
Before connecting the appliance, check that the voltage values shown on the data plate correspond to those of the electricity supply network. In the event of incompatibility between the electric outlet and the plug of the appliance, have the outlet replaced with another more suitable type by professionally qualified personnel, who will make sure that the section of the wires of the outlet is appropriate for the absorbed power of the heater. In general, the use of adapters or extension cords is not recommended; if their use is indispensable, they must conform to existing safety standards and their current capacity (amperes) must not be less that the maximum of the appliance.
The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
Before each use, check that the equipment is in good condition, and that the power cable is not damaged: if in doubt consult a qualified professional.
Place the appliance far from
- Heat sources (e.g.flames, gas stoves etc.)
- container of liquids (e.g.sinks etc) to avoid any spray or the appliance falling into it (minimum distance of 2 meters)
- fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille; make sure that the front is free of unstable materials (dust, etc.).
The surface on which the appliance is placed must be stable, level (otherwise the unit may fall over) and smooth. Do not place the fan on shelves. Do not hang the unit on the wall.
This appliance is not intended to be operated by means of an external timer or a separate remote control system, to avoid the risk of fire in case the device is covered or is positioned incorrectly.
Do not place the wall fan into the room to avoid the back-flow of gases from the open flue of gas or other fuel-burning appliances (for duct and partition fans).
This device is NOT suitable to use it in an explosive environment (in the presence of flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air).
Do not connect to thermal control systems or a programmer or timer or other device that can automatically turn on the unit, thus avoiding the risk of damage to people, animals or property.

ASSEMBLY

Attention: the fan can only be used if complete with the support base (front and rear shell). Attention: always unplug the appliance before you assemble.
To assemble it, refer to figures. bimar-VC76.2-Tower-Fan-
FIG-2

Unscrew the ring nut on counterclockwise bottom of the body, if the nut is screwed.
Couple the rear shell to the front. Plug the power cord through the hole, secure the set by turning clockwise the ring nut.
Plug the power cord through the guidance of the shell.

USE

Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a person with similar qualifications, in order to avoid any risk.

Your appliance is equipped with the following regulation elements, controlled by turn the knobs on the keyboard located on the rear of the control panel.
Plug it in.
Timer : This appliance has a timer for automatic switching off at the end of the time set; to set the time turn the timer knob clockwise to the position corresponding to the desired operating time (0-120 min.); in order to operate the appliance in a continuous manner, and to therefore exclude use of the timer, turn the knob anticlockwise to the “ON” position.

Ventilation
After setting the timer:

To switch the appliance on, turn the selector knob to the position corresponding to the desired power setting “1-2-3” (see a ref. picture on the side)
0 = Off 1 = Speed minimum 2 = Speed medium 3 = Speed maximum
To activate oscillation (right-left) turn the knob clockwise to the position corresponding to the desired power setting “1-2-3” (see a ref. picture on the side).
To switch off the appliance, turn the selector knob to the “0” position or turn the timer knob to the “OFF” position, and then remove the plug from the socket.

When not in use for long periods, the plug must always be removed from the socket.

CLEANING AND MAINTENANCE

Attention : before normal cleaning, remove the plug from the socket.

Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally qualified help.
The motor’s air holes must be kept from dust and lint.
If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend storing it in its original packaging.
Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the power cord (after making sure you have disconnected the plug from the socket) and make dangerous parts harmless if children are allowed to play with them.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin. 220-240V~ 50Hz 45W