ZIP InLine ES4 Instantaneous Water Heater Instructions
- June 10, 2024
- Zip
Table of Contents
ZIP InLine ES4 Instantaneous Water Heater Instructions
Zip In Line ES4 under-sink electronic instantaneous water heater single outlet for hand washing. Compact design, featuring bare-wire for fast heat up, no standing heat losses. Easy to install and service.
Features and benefits
- Compact electronic instantaneous water heater with highly energy efficient bare wire system for economic water supply to a single outlet.
- The innovatively designed appliance heats the water automatically as it flows through, without wasting energy in standby operation.
- The heating power electronically compensates for variable inlet pressures and temperatures.
- Outlet temperature factory set to 38o C, but can be installer adjusted between 30o C to 43o C.
- Intended for use with taps having M22 /M24 nozzles.
- Easy to install and service
Product detail
Specification type
Product code ES4
Product name InLine ES4 Instantaneous 4.4kW
Energy efficiency class A
Element type Bare Wire Heating System
IP rating 25
Capacity, weights & dimensions
Product weight 1.3kg
Filled Product Weight 1.5kg
Unit dimensions (W x D x H) mm 187 x 80 x 135
Electrical
Nominal power rating 4.4 kW @ 230V AC
Nominal power supply 230V
Nominal rated current 19 amps
Plumbing
Wholesome water supply Yes
Water connection Size 1/2″BSP
Min water pressure 0.45bar
Max water pressure 10bar
Minimum flow rate l/pm 1.5
Maximum flow rate l/pm 2.5
Temperature increase at maximum flow rate 26.2°C
Minimum water resistance @ 15oc >800 Ω
Installation – Plumbing (H/C) The appliance is intended for connection to
the wholesome water supply. It should be installed by a suitably qualified
person. The appliance may be used as an unvented installation (as shown in the
diagram opposite) or as a vented installation.
Typical Installation
Energy Certificate
Specification sheet Zip InLine ES Technical Support
Tel. 0345 6 005 005
Email: [email protected]
specify.zipwater.co.uk