PENTAIR PKG-1-4SD Jet Package Kits Instruction Manual
- June 10, 2024
- Pentair
Table of Contents
Installation Procedures
Jet Package Kits
PKG-1-4SD Jet Package Kits
Inspect kit to ensure all parts are included. Select the proper venturi and
install as shown in Figure 1.
Nozzle is installed at the factory and ordinarily does not require change.
Parts which may vary from Kit to Kit
Jet Kit No.| Nozzle
Key No. 3| Venturi
Key No. 4| Replaces
Pkg No.
---|---|---|---
Pkg 1-4SD Pkg 2A-4SD| #51(J34P-41)| J32P-24| Pkg 1-4EP
Pkg 1-10SD| #54(J34P-44)| N32P-67B| Pkg 1-10N2
Pkg 1-11SD| #54(J34P-44)| N32P-68B| Pkg 1-11N2
Pkg 1-12SD| #54(J34P-44)| N32P-65| Pkg 1-12N
Pkg 1-15SD Pkg 2A-15SD| #52(J34P-42)| J32P-18| Pkg 1-15EP
Pkg 1-23SD Pkg 2A-23SD| #52(J34P-42)| J32P-24| Pkg 1-23EP
Pkg 1-27SD| #51(J34P-41)| N32P-75B| Pkg 1-27N
Pkg 1-29SD| #51(J34P-41)| N32P-66B| Pkg 1-29E2
Pkg 1-54SD Pkg 2A-54SD| #54(J34P-44)| J32P-22| Pkg 1-54E P
Pkg 1-55SD Pkg 2A-55SD| #53(J34P-43)| J32P-18| Pkg 1-55EP
PKG CK1| #53(J34P-43)| J32P-20
J32P-22
N32P-72
N32P-72E
Pkg 1-14EP| Pkg 1-42EP
Pkg 1-14EP
Pkg 1-52E
Pkg 1-28N
PKG CK2| #54(J34P-44)| J32P-29
J32P-24
N32P-64| Pkg 1-16EP
Pkg 1-17EP
Pkg 1-29N
PKG CK3| #51(J34P-41)| J32P-26
J32P-32
N32P-78B| Pkg 1-8EP
Pkg 1-6EP
Pkg 1-50E,EB
PKG CK4| #55(J34P-45)| J32P-28
J32P-32
J32P-38| Pkg 1-11EP
Pkg 1-10EP
Pkg 1-9EP
PKG CK5| #55(J34P-45)| N32P-66B
N32P-67B| Pkg 1-51E,EB
Pkg 1-30E2
***** Poly pipe adapter will not fit over venturi. Use galvanized pipe.
Parts common to all Jet Kits
| Key No. | Part Description | Qty. | Part No. |
|---|---|---|---|
| 1 | Pipe Nipple (Pkg CK Series Only) | 1 | U37-67P |
| 2 | Jet Body | 1 | N40-92N |
| 5 | 3/8-16×7/8” Hex Washer Hd. Cap Screws* | 2 | U30-961PS |
| 6 | Gasket* | 1 | N20-25 |
*** Not included with Kit Nos. PKG1-4SD, -15SD, -23SD, -54SD, -55SD or PKG
2A-4SD, -15SD, -23SD, -54SD, -55SD
Accessory Package 2A Parts**
(Also included with all PKG 2A- Series Jet Kits)
| Key No. | Part Description | Qty. | Part No. |
|---|---|---|---|
| 7 | Poly Pipe Adapter | 1 | U11-104P |
| 8 | Foot Valve | 1 | U212-94DB |
Repair Parts
Pkg 2A-SD Series includes Key Nos. 2 – 8.
Pkg 1-SD Series includes Key Nos. 2 – 6.
Pkg CK Series includes Key Nos. 1 – 6.
Accessory Pkg 2A includes Key
Nos. 7 – 8.
Shallow Well Installation
Figure 2 – Shallow Well
When your pump is installed as a Shallow Well pump (25 feet or less to the
drawdown water level*), attach the jet tothe pump as shown in Figure 2. Insert
the venturi end of the jet in to the larger (suction) port in the pump. Use
the gasket and washer head capscrews included with the jet. Tighten the screws
evenly and firmly.
***** The “drawdown water level” is the distance from the pump to water while
the pump is running.
Deep Well Installation
Figure 3 – Deep Well
TABLE I – In-well Pipe Sizes
| HP | Installation | Suction | Drive |
|---|---|---|---|
| 3/4 | Multi-Stage Jet Pump | 1-1/4” | 1” |
| 1 | Multi-Stage Jet Pump | 1-1/4” | 1-1/4” |
| 1-1/2 | Multi-Stage Jet Pump | 1-1/4” | 1-1/4” |
| All | Horizontal Jet Pump | 1-1/4” | 1” |
For long horizontal runs of piping, consult your owner’s manual for
recommended piping size increase.
When your pump is installed as a Deep Well pump (more than 25 feet to the
drawdown water level), install the jet in the well as shown in Figure 3. The
gasket and capscrews included with the jet package are not needed for a deep
well installation.
Refer to Figure 4 for typical Deep Well installations and fittings required.
Refer to your pump owner’s manual or insert sheet WC80-188 for specific
performance and depth setting information.
Figure 4 – Typical Deep Well Installations
Documents / Resources
|
PENTAIR PKG-1-4SD Jet Package
Kits
[pdf] Instruction Manual
PKG-1-4SD Jet Package Kits, PKG-1-4SD, Jet Package Kits, Package Kits
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>