Tesla GT400 PowerStar Upright Vacuum Cleaner User Manual
- June 10, 2024
- Tesla
Table of Contents
- GT400 PowerStar Upright Vacuum Cleaner
- IMPORTANT SAFETY INSTRUCTIONS
- PACKAGE CONTENTS
- DESCRIPTION
- BEFORE FIRST USE
- ASSEMBLY OF THE APPLIANCE
- DESCRIPTION OF OPERATION
- CLEANING AND MAINTENANCE
- STORAGE
- TROUBLESHOOTING
- WARRANTY REPAIR
- DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TESLA PowerStar GT400
GT400 PowerStar Upright Vacuum Cleaner
Dear customer,
Thank you for choosing the TESLA PowerStar GT400.
Before using the device, please read the rules of safe use carefully and
follow all common safety rules.
- read through the instructions for use thoroughly before using
- keep the user manual for future reference
- follow the rules in this manual to reduce the risk of equipment damage or personal injury
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
This appliance is a complex electromechanical device, please pay attention to
the following instructions:
- This appliance is intended for domestic use only; The brand bears no responsibility for improper use or use contrary to the instructions for use and is not covered by the warranty.
- The appliance is only intended for indoor use at room temperature (max. 40°C).
- Do not direct the discharged steam at people, animals, electrical appliances or electrical outlets.
- Do not immerse the appliance in water.
- Do not leave the appliance unattended.
- Do not leave the appliance plugged in when not in use.
- Never unplug the appliance by pulling on the power cord.
- Keep the appliance’s power cord away from heat, oil and sharp edges.
- Do not pull or carry the appliance by the power cord.
- Do not handle the appliance with wet hands.
- Do not use to clean the pool.
- Do not use the appliance in an enclosed space filled with steam released from oil paints, paint thinner, some moth repellents, flammable dust or other explosive or toxic fumes.
- The appliance emits very hot steam to disinfect the area of use. This means that the steam head and the microfiber cleaning mop become very hot during use.
- Always wear suitable footwear when handling the appliance. Do not wear slippers or shoes with an open toe.
- Never add additives such as perfumes, stain removers or alcohol-containing substances to the water or detergent dispenser. The appliance could be damaged or could become dangerous to the user.
- You should be careful when using this appliance. DO NOT touch any parts that may become hot during use.
- Use only original accessories designed for this model.
- Do not touch the parts that are connected to the mains when your hands are wet.
- Do not open or repair the device, as there is a risk of electric shock and loss of warranty.
- The manufacturer and importer into the European Union are not liable for damages caused by the operation of the device, such as injury, scalding, fire, injury, deterioration of other items, etc.
Do not use on leather, waxed polished furniture or floors, synthetic fabrics, velvet or other delicate steam-sensitive materials. Do not use on any unsealed hard floor surfaces. In addition, on surfaces that have been treated with wax or some wax-free floors, the gloss can be removed by heat and steam. It is always recommended to test the insulated area of the surface to be cleaned before cleaning. We also recommend checking the floor manufacturer’s instructions for use and care.
PACKAGE CONTENTS
Carefully check that you have unpacked all the supplied accessories, we recommend that you keep the original paper box, user manual and packing material during the warranty period.
DESCRIPTION
1 Steam release control
2 HEPA filter holder
3 HEPA filter frame
4 Dust container
5 Appliance body
6 Carpet glider
7 Handle
8 Electronic touch control buttons
9 Hook for attaching the power cord
10 Handle| 11 Main frame handle
12 Power cable
13 Water tank
14 Air intake plastic cover
15 Water filter
16 Cleaning head
17 Microfiber mop
18 Microfiber mop holder
19 Microfiber mop
---|---
BEFORE FIRST USE
Remove all packaging material, appliance and accessories. Remove any
transparencies, stickers, or paper. Check that the appliance and any part of
it is not damaged.
WARNING: Before carrying out any of the following operations, make sure
that the appliance is switched off, unplugged and contains little or no water.
ASSEMBLY OF THE APPLIANCE
-
Insert the handle into the main body of the appliance until you hear a click. Attach the base to the main body until it clicks into place.
-
Open the water tank and fill it with clean lukewarm water up to the MAX mark, then close and tighten the cover. Do not use any chemicals or other liquids, such as rust removers, aromatics, alcohol, detergent, etc. Insert the water tank into the body of the appliance so that it is justified with the water supply; until it „clicks“ into place.
To perfectly disinfect your floor, clean the area at least three times with a slow, even motion, with the help of hot steam. Never use a steam mop without a properly fitted microfiber mop.
Make sure that the valve seal is always in place as shown in the figure. -
Attach the microfiber mop (19) to the holder (18) and snap it into the center of the scrub head (16).
-
Plug the power cord (12) into an electrical outlet.
-
When cleaning the carpet, install the carpet glider (6) to make it easier to clean.
DESCRIPTION OF OPERATION
Switching the vacuum cleaner On/Off: press the „POWER“ button. The
appliance can be used together with hot steam or separately only as a vacuum
cleaner.
Steam discharge intensity: Low – MIN button (for daily cleaning, wooden
floor, etc.) or High – MAX button (for durable floors, on greasy surfaces,
tiles or stone). Hot steam can be used at the same time as vacuuming the floor
or separately only as a steam mop.
Ready to release steam: the „STEAM READY“ indicator flashes during
heating. A fully lit indicator indicates that steam can be emitted by pressing
the Steam release control button (1).
CAUTION: Water that appears on the floor when using the hot steam
cleaning function is part of the normal operation of the appliance.
ATTENTION!
Do not touch the surface shown in the illustration,to avoid scalding.
If the water level reaches below its minimum level or is completely without
water, stop using the steam function to prevent damage to the appliance.
CLEANING AND MAINTENANCE
Make sure that the appliance is unplugged and completely cooled down.
A: Press the switch to release the dust tank.
B, C, D: Remove the dust tank and empty it in the trash bin.
Remove the water tank and pour the water into the sink. Check the water filter (15) regularly. If the water filter is not replaced in time, calcium deposits may start to accumulate in it, causing damage to the appliance or reducing its performance.
Cleaning air intake
If the appliance draws in a larger object, it may sometimes be necessary to
clean the air intake as well.
After removing the water tank and the filter from the main body, also remove
the air intake plastic cover (14), grasp the plastic part in the pliers and
pull it out. Clean the air intake and then reinstall the cover.
The appliance should only be operated with the plastic air supply cap
installed.
HEPA filter cleaning
Press the dirt tank release button and pull it out of the appliance body. The
HEPA filter holder (2) and the HEPA filter frame (3) can be washed in warm
soapy water and then allowed to dry completely naturally.
The HEPA filter should be cleaned at least once a month. If dirt accumulates
on the filter, it should be cleaned immediately. Dry the filter completely
before using it again. The appliance must only be operated with the HEPA
filter installed to prevent damage. In the event of heavy soiling or poor
vacuum cleaner performance, replace it with a new one. We recommend replacing
it at least once every 6 months.
Replacement and cleaning of microfiber mops
- Drain the remaining water into the sink.
- The cleaning microfiber mops can be washed in warm water with a small amount of dish soap if they are dirty.
- If necessary, wash both microfiber mops in warm soapy water, maximum 30 – 40°C, without bleach or fabric softener. Let them dry naturally, do not use the clothes dryer.
STORAGE
After use, turn off the power to the appliance and unplug the power cord. Remove the water tank and pour out the residual water. Store the appliance in a dry and clean place.
TROUBLESHOOTING
Trouble | Probable cause | Remedy |
---|---|---|
The mixing shaft don’t rotates after switch on | Electric connectors are loose |
Check he electric circuit, tighten those loose connectors
Oil leakage| Oil seals are worn out| Replace those oil seals
The raising handle is too tight| Guide ways are corroded| Clean and oil the
guide ways
The lead screw, bevel gear and
hand wheel shaft etc is dry| Oil them
Temperature rise of motor is too high, below speed| Lack of voltage| Check the
supply voltage
Over load| Less load
The working speed selected is too high or agitator is not suitable| Select a
suitable speed and agitator
The noise of the gearbox is serious, its temperature is too high| Lubrication
is insufficient| Add or replace the oil
The agitator knocks with the bowl| The agitator or the bowl is deformed|
Repair or replace deformed part
WARRANTY REPAIR
For warranty repair, contact the dealer where you purchased the TESLA product.
The warranty DOES NOT APPLY to:
- using the device for other purposes than it was designed to
- normal wear and tear
- failure to observe the „Important safety instructions“ stated in the user manual
- electrical or mechanical damage caused by improper use
- damage caused by natural elements such as water, fire, static electricity, power surges etcetera
- damage caused by an unauthorized repair
- unreadable serial number
DECLARATION OF CONFORMITY
We, INTER-SAT LTD, org. složka, declare that this device complies with the
essential requirements and other relevant provisions of the standards and
regulations relevant to the type of equipment.
This product complies with the requirements of the European Community.
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2002/96/EC. Please
inform yourself about the local separate collection system for electrical and
electronic products. Please act according to your local rules and do not
dispose of your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative consequences
for the environment and human health.
Due to the fact that the product is being developed and improved, we reserve
the right to edit the user manual. You can always find the latest version of
the this user manual at www.tesla-electronics.eu.
Design and specification may be changed without prior notice, print errors
reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>