DOMAILLE ENGINEERING FPM-HDA-600 Optical Fiber Polishing Machine User Guide
- June 9, 2024
- DOMAILLE ENGINEERING
Table of Contents
FPM-HDA-600 Optical Fiber Polishing Machine
Product Information
The FPM 600 is a polishing machine used for polishing fixtures,
pads, and films. It comes with a front view and back view machine
diagram for easy setup and use. The machine features a polishing
cycle and can be shut down easily after use. It requires daily and
monthly maintenance to ensure optimal performance, and it can be
transported and stored for convenience. Technical specifications
and warranty information are provided in the user manual.
Product Usage Instructions
Getting Started
-
Unpack the FPM 600 and set it up according to the machine
diagram provided. -
Refer to the precautions section before using the machine.
Machine Operation
-
Install the polishing fixture according to the instructions
provided. -
Replace the polishing pad and film as needed.
-
Start the polishing cycle.
-
Shut down the machine after use.
Machine Maintenance
The FPM 600 requires daily and monthly maintenance to ensure
optimal performance.
-
Perform daily maintenance, including cleaning the machine and
checking for any defects or issues. -
Perform monthly maintenance, including lubricating moving parts
and checking for any wear or tear.
Transportation & Storage
- Transport the FPM 600 carefully to avoid any damage.
- Store the machine in a dry, cool place away from direct
sunlight.
For technical specifications and warranty information, refer to
the user manual provided.
Table of Contents
Welcome
Overview
1
Getting Started
Unpacking & Setup
2
Precautions
3
Machine Diagram
Front View
4
Back View
5
Machine Operation
Polishing Fixture Installation
6
Polishing Pad & Film Replacement
7
Polishing Cycle
7
Machine Shut Down
8
Machine Maintenance
Daily
9
Monthly
10
Transportation & Storage
12
Service & Support
Technical Specifications
13
CE Notice
13
Company Information
14
Warranty
15
1
2
3
FPM 600 Front View
4
FPM 600 Back View
5
6
7
8
9
10
11
12
13
14
15