LEPOWER Torchiere Floor Lamp User Manual

LEPOWER Torchiere Floor Lamp

Torchiere Floor Lamp

The Torchiere Floor Lamp by LEPOWER is a versatile lighting solution suitable for use in your living room, bedroom, study room, restaurant, hotel, office, kids’ room or college dorm. The package includes one Torchiere Floor Lamp, one remote controller, one wireless wall switch, one user manual, and one adapter.

Specifications of Floor Lamp

• Brand: LEPOWER
• Model: IL-US-YX3050DM-241A0-02
• Maximum Wattage: 20W
• CRI: >80
• Luminous Flux: 2000lm
• Color Temperature: 3000K-5000K
• Cord Length: 70.9 inches
• Material: Metal+PC

Usage Instructions

There are three ways to control the Torchiere Floor Lamp:

1. Manual Control: Connect the cord with the adapter and twist the pole segments tightly successively. Install the round base carefully to avoid any accidents. Connect the pole of the lamp head. To turn on/off the lamp, use the button on the lamp head.
2. Remote Controller: The remote controller is matched with the floor lamp before leaving the factory. Press any button on the remote controller for any lighting effect. Note that the remote controller can be attached to the pole of the floor lamp. If the remote controller does not work, disconnect the power and then connect again. Short press “on” and “brightness +” simultaneously to match within 10 seconds after the lamp is plugged in again. If the floor lamp flashes three times, the match is successful. Repeat the whole process if the match is not successful.
3. Wireless Wall Switch: Stick the wall switch on the wall through double-sided tape. Press the button on the switch to turn on/off the floor lamp. Using the wall switch through walls is not recommended. The longest remote control distance is 42.8ft under unobstructed conditions.

Other instructions:

• The Torchiere Floor Lamp is not suitable to place on a tilted surface.
• If the floor lamp needs any inspection and repair, entrust qualified professionals.
• The floor lamp is only for indoor use, keep it away from wet locations.
• Do not touch the floor lamp with wet hands when it is on.

This product comes with a 12-month warranty for the light and a 60-day money- back guarantee for quality problems. Contact the manufacturer by clicking “ask a question” button in their store or sending an email with any questions or concerns.

Mother-Daughter Floor Lamp

The Mother Daughter Floor Lamp by LEPOWER is also a versatile lighting solution suitable for use in your living room, bedroom, study room, restaurant, hotel, office, kids’ room or college dorm. The package includes one Mother Daughter Floor Lamp, one remote controller, one wireless wall switch, one user manual, and one adapter.

For usage instructions, please refer to the instructions provided in the Torchiere Floor Lamp section above as the usage instructions are similar for both products.

Package Includes

• Torchiere Floor Lamp x 1
• Remote Controller x 1
• Wireless Wall Switch x 1
• User Manual x 1
• Adapter x 1

Versatile Lighting

Living room, bedroom, study room, restaurant, hotel, office, kids’ room, or college dorm

Mother Daughter Floor Lamp

Brand| LEPOWER| Model| IL-US-ZM3050- DM-241A0-02
Maximum Wattage| 24W| CRI| >80
Luminous Flux| 2400lm| Color Temperature| 3000K-5000K
Cord Length| 70.9 inches| Material| Metal+PC

Installation

1. Twist the pole segments tightly successively shown as ➀~➂;
2. Install the round base shown as ➃. Please be careful to avoid the heavy base hitting you;
3. Connect the pole of the lamp head shown as ➄;
4. Connect the cord with the adapter.

OVERVIEW

How to use

Method 1: Touch Control

• Press to turn on/off the light.
• Press to increase the brightness.
• Press to decrease the brightness.
• Press to adjust the color temperature.

Method 2: Remote Controller

The remote controller has been matched with the floor lamp before leaving the factory. It’s out-of-the-box.
Note : The remote controller can be attached to the pole of the floor lamp.

Method 3: Wireless Wall Switch

Press to turn on/off the floor lamp.

Question & Answers

• Q1: What can you do if the remote controller doesn’t work?

  • Step 1: Please keep the lamp on, disconnect the power, and then
    connect again. Short press“ ” and “ ” simultaneously to match, which must be finished in 10s after the lamp is plugged in again.

  • Step 2: If the floor lamp flashes three times, the match is successful. Otherwise, please repeat the whole steps above until the match succeeds.

  • Step 3: Press any button on the remote controller for any lighting effect.

• Q2: How to install the wireless wall switch?
  Please stick the wall switch on the wall through double-sided tape. Through walls to use the wall switch is not recommended.

• Q3: What is the applicable range of the wall switch?
  The longest remote control distance is 42.8ft under unobstructed conditions.

Cautions

1. This movable floor lamp is not suitable to place on a tilted surface.
2. If the floor lamp needs any inspection and repair, please entrust qualified professionals.
3. The floor lamp is only for indoor use. Please keep it away from wet or damp locations.
4. Please don’t touch the floor lamp with your wet hands when it is on.

Warranty

We provide a 12-month warranty for the light and a 60-day money-back guarantee for quality problems.

Contact Us:

If there is any question before or during the use of our light, please kindly contact us by clicking the “ask a question” button in our store, and send us an email. We will respond to your email as soon as we can.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions and compliance with exposure requirements.

Light Your Home,Power Your Life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>