mPTech OW-4202 RGB LED Tape Instruction Manual

mPTech OW-4202 RGB LED Tape Instruction Manual

Parts Descriptions

INSTRUCTIONS FOR USE

After carefully taking the elements out of the packaging, unwind gently and place the LED tape in the place where it will be used. The surface on which the tape is placed should be dry and free from contamination. Attention! The minimum bending radius is 25mm.
Connect the LED tape power plug to the LED tape power socket (the cable coming out of the RGB LED tape controller) so that the arrows on the socket and plug are directed directly at each other. Reverse connection of the plug and socket will result in the lighting not working. Connect the mains plug to a mains socket with the parameters specified on the rating plate of the RGB LED strip controller. Place the cable with the infrared receiver so that it is visible to the user who controls the LED tape operation with the infrared remote control. Any obstacle between the receiver and the remote control may result in problems with controlling the LED tape. Using the remote control, you can turn the LED tape on and off. Buttons marked with shades of colours allow you to turn on all colours using RGB diodes. Buttons with different shades turn on all LEDs, and the intensity of the individual colours depends on the button selected. On the right side of the remote control there are 4 buttons that allow you to activate one of the automatic colour change modes. The remote control also has buttons that allow you to adjust the brightness of the light, but it only works when a specific colour of light is selected. In automatic colour changing modes, they regulate the speed of this change

Do not use too much force when working with the product, as you may damage its components. When storing the product, protect it against the access of children or pets, as they may damage it. Protect the product from water and other liquids. The device may only be dry cleaned using a soft cloth. Avoid direct sunlight and very high temperatures, as they can shorten the life of the product by deforming or melting its components. Do not disassemble the product and do not interfere with its structure, as this may damage it. Attention! The cut off section is unusable. Before making a cut, disconnect the device from the power supply. Connecting of tapes is not recommended. Decorative lighting. The product is not suitable for lighting domestic rooms. Save the packaging for future reference as it contains important information. The LEDs are not replaceable.

Do not look closely at the LEDs while they are in operation, as this may permanently damage your eyesight!
The manufacturer is not responsible for the consequences of situations caused by improper use of the product or noncompliance with the recommendations.

CORRECT DISPOSAL OF USED EQUIPMENT

The device is marked with a crossed-out garbage bin, in accordance with the European Directive 2012/19 / EC on used electrical and electronic equipment (Waste Electrical and Electronic Equipment – WEEE). Products marked with this symbol should not be utilized or disposed of with other household waste after the end of their service life. The user is obliged to get rid of used electrical and electronic equipment by delivering it to a designated point, where such hazardous waste is subjected to the recycling process. Collecting this type of waste in dedicated places and the proper process of their recovery contribute to the protection of natural resources.

CORRECT DISPOSAL OF USED BATTERIES

In accordance with the EU directive 2006/66 / EC as amended by the Directive 2013/56 / EU on the disposal of the batteries, this product is marked with the symbol of a crossed-out garbage can. The symbol indicates that the batteries used in this product should not be disposed of with normal household waste. Users of batteries and accumulators must use the available collection points for these items, which allows for their return, recycling and disposal.

Hereby, mPTech Sp. z o.o. declares that this product complies with the basic requirements and other provisions of the so-called “New Approach” Directives of the European Union.

The symbol denotes a device of protection class II with double insulation. Devices of this class are characterized by reinforced insulation that provides protection against direct and indirect contact. In addition to the basic insulation, additional insulation is also used- applies to tape controller

Symbol of Class III equipment. A Class III appliance is supplied from a separated/safety extra-low voltage (SELV) power source, in such system the voltage cannot exceed ELV under given conditions – applies to tape.

This symbol indicates that the package contains a user manual that should be read before use.

Indoor use only.

The packaging of the device can be recycled according to local regulations.

The packaging components must be disposed of in the appropriate containers

Designation of the container to which the liner – paper should be thrown.

Symbol denoting the type of packaging material: cardboard.

Marking of the container where the blister should be thrown away – plastic / metal.

Manufacturer:
mPTech Sp. z o.o.
Nowogrodzka 31 street
00-511 Warsaw, Poland
Manufactured in China
Lot number: 202111
2 year warranty
For warranty matters, please
contact us by phone: (+48 71) 71 77 400

Documents / Resources

| mPTech OW-4202 RGB LED Tape [pdf] Instruction Manual
OW-4202 RGB LED Tape, OW-4202, RGB LED Tape, LED Tape, Tape
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>