BRITEX HBKO Knee Operated Hand Basin Instructions
- June 9, 2024
- BRITEX
Table of Contents
BRITEX HBKO Knee Operated Hand Basin
To order this item please advise
- Spout type: gooseneck or low level
- If optional Tempering Valve required
Product Info
- User activates spout by leaning against panel
- Complies with food handling standards
- No electrical or power require ments
- Supplied pre-plumbed
- PLV (FI 1/2” fittings) is supplied separately.
- 45° chamfered front corners
- 40mm waste and wall bracket supplied
- Choice of low level or gooseneck spout
- Optional tempering valve
INSTALLATION NOTES
- Fixture strength is ultimately determined by the load capacity of the supporting structure (noggins recommended for stud walls) and use of appropriate fixings. 2) Basin is secured to wall with an offset bracket positioned behind the splashback and via 8mm fixing holes integrated into tags at the back of the basin body. 3) Minimum flow pressure to 1/2” PLV connection = 200kPa. (Max=350kPa) 4) Tempering valve supplied only by request. 5) Suggested mounting height 850-900mm FFL to basin rim.
DIMENSIONS
Customer Service
Scan QR code
to view our
installation notes
(Low Level Spout option shown)
Due to ongoing research and our commitment to product development, details are
subject to change without notice. Details accurate at
britex.com.au |
info@britex.com.au | A.B.N 83 004 309 737
Please refer to britex.com.au for the most current product information.
Allow +/- 5mm tolerance for dimensions and setouts shown in product literature
call us on 1300 764 744
References
Read User Manual Online (PDF format)
Loading......