uAvionix AV-Link EXP Wi-Fi Module User Guide

June 9, 2024
uAvionix

uAvionix AV-Link EXP Wi-Fi Module

Specifications

Input Voltage/Power 9 to 30.3 VDC
Size 52.06 x 52.63 x 25.91 mm
Weight 32.2 grams
Operating temperature range -45°C to +70°C
Maximum pressure altitude 35,000ft
  1. Attach AV-Link to AV-30
    Attach the AV-Link to the back of the AV-30 by inserting the unit into the DB-15 connector on the back of the AV-30.

  2. Tighten Jack Screws (2x)
    Using a 3/16” nut driver, tighten the two [2] Jack Screws to 5 in-lbs max. DO NOT overtighten.

  3. Reattach original back-shell connector
    Using a flat screwdriver, tighten the two [2] screws to 5 in-lbs max. DO NOT overtighten.

Update AV-Link Software

  1. Power on AV-30
    Apply power and wait for AV-30 to fully boot.

  2. Connect PC via Wi-Fi
    Connect a PC to the AV-Link Wi-Fi Network (AV_XXXX).

  3. Open Web Browser
    Navigate to the AV-Link homepage using the URLs below.
    Version 0.2.39 or earlier: 192.168.4.1 Version 0.3.0 or later: 192.168.5.1

  4. Go to AV-Link Firmware Update Page
    In the Settings box, click the first link next to Firmware:

  5. Choose Update File
    Select Choose File, then select the downloaded AV-30 firmware.
    Download AV-Link Firmware: https://uavionix.com/support/av-30-e-support/

  6. Start the Update
    Once the file has been selected,click Start Update
    DO NOT power off the unit or close the web browser until the update is complete.

  7. AV-30 will Remain On
    During the update, AV-30 will continue to operate as normal.
    DO NOT power off the unit or close the web browser until the update is complete.

  8. Update Complete Verify Firmware Version
    Upon completion, visit 192.168.5.1 to view the AV-Link homepage and verify the firmware version.

Update AV-30 Software

  1. Power on AV-30
    Apply power and wait for AV-30 to boot fully.

  2. Connect PC via Wi-Fi
    Connect a PC to the AV-Link Wi-Fi Network (AV_XXXX).

  3. Open Web Browser
    In a Web Browser, navigate to the AV-Link home page via the following URL: 192.168.5.1

  4. Select AV Firmware Update
    At the bottom of the page select AV Firmware Update

  5. Choose Update File
    Select Choose File, then select the downloaded AV-30 firmware.
    Download AV-30 Firmware: https://uavionix.com/support/av-30-e-support/

  6. Start the Update
    Once the file has been selected,click Start Update
    DO NOT power off the unit or close the web browser until the update is complete. AV-30 will reboot.

  7. AV-30 will reboot
    During the update, the AV-30 screen will be black.
    DO NOT power off the unit or close the web browser until the update is complete. AV-30 will reboot and the webpage will popup an update complete message.

  8. Update Complete Verify Firmware Version
    After AV-30 reboots, the AV-Link homepage will be displayed.

Connect ADS-B Receiver

Auto Connect
By default, AV-Link will automatically identify preferred uAvionix™ ADS-B devices and connect to the nearest device, making the initial use very simple.

AV-Link will automatically connect to the nearest:

  • Sentry
  • Sentry Mini
  • SkyEcho
  • echoUAT
  • skySensor

Manually Connect
If a custom ADS-B Receiver is desired, AV-Link can be connected to nearly any GDL90 receiver via the AV-Link Wi-Fi setup page, accessible by a web browser at: 192.168.5.1
Please refer to section 13.5 of the AV-30-E Pilot Guide to configure a custom ADS-B Receiver.

Traffic Display on AV-30

uAvionix-AV-Link-EXP-Wi-Fi-Module-23

  • Power on the supported ADS-B Receiver
  • Hold center knob 3 seconds to change screens. Traffic Display is the third screen.

Please reference the AV-30-E Pilot Guide for detailed operation instructions.
Go to AV-30-E Pilot Guide

Limited Warranty

uAvionix products are warranted to be free from defects in material and workmanship for two years from the installation of tailBeaconX on the aircraft. For the duration of the warranty period, uAvionix, at its sole option, will repair or replace any product which fails in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost.

Restrictions: This warranty does not apply to cosmetic damage, consumable parts,damage caused by accident, abuse, misuse, fire or flood, theft, damage caused by unauthorized servicing, or product that has been modified or altered.

Disclaimer of Warranty: IN NO EVENT, SHALL UAVIONIX BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU

Copyright 2023, All Rights Reserved
uAvionix.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals