Reobiux R1 Light Bulb Wifi Camera User Guide

Reobiux R1 Light Bulb Wifi Camera

WARRANTY & SUPPORT

Thanks for your purchasing from us. having issues with your cameras. please contact us either way below. Our support team would offer your the best solution to solve any problem within 24 hours.

Contact us:
support_cam@163.com
https://bit.ly/3tj1f0C

Extended 2-Year Replacement Warranty
Welcome to register your order ID in our VIP center to claim a 2-Year Full Replacement Warranty and become one of our VIP members and get more discount information.

Please visit benders. VIP or scan the following QR code.

Scan the QR code to extend the 2-year warranty

• If the system failed to recognize your order ID please contact us directly.
• This policy is valid for damage under normal use.
• Not valid for Human-made and force majeure reasons.

CONNECT THE CAMERA TO THE MOBILE DEVICE

App Downloading and Installation
Search for Tuya Smart from App Store”/Google Play™, or scan the QR codes below to download and install the App on your mobile device.

Account Registration and Login

Please register an account with a valid email address, then log in to your Tuya Smart account.

1. Open the Tuya Smart App, and enter your email to start registering.
2. Enter the verification code received in the email.
3. Set the password and Log in.

Tip:

• You can also use WeChat, Facebook, line, or the temporary visit to log in to the app.
• Temporary access will not be able to receive information from the device.

Connect the Camera to Tuya Account

Importance:

1. This camera only supports 2.4GHz Wifi networks.
2. For a stable network connection, please make sure the camera and the mobile device are close to the router.
3. Avoid using special characters or symbols in your Wifi name and password, such as@!#$&* and so on.
4. Please turn on the location service and Wifi on your mobile device, then allow Tuya Smart App to access your location and use Wifi.
5. For all connecting options, you will hear the prompt sound after the camera is powered on. Press and hold the Reset button for 6-Bs to reset the camera if no voice prompts heard. If you hear a beep sound and the camera starts to rotate, it means reset successfully.

Use card pins or toothpicks to long-pres the reset button for 8s

Connect the camera by scanning the QR code
Power on the camera, wait until you hear a prompt sound and the Camera stops turning, Then wait about 30 seconds to configure. Make sure your phone is connected to
Wi-Fi before connecting the camera.

1. Tap in the center or upper right corner.
2. Select Security & Video Surveillance> Smart Camera (Wi-FI).
3. Tap Next.
4. Connect to your router’s Wifi and tap Next.
5. The QR code will appear. Align the QR code with the camera lens and keep a distance of 4-8 inches, until you hear the prompt sound. Then tap • I heard a prompt” in the page.

Tip:
If the scan fails, please reset the camera. Reset method: use the reset pin to long-press the reset button for 8 seconds until you hear a beep.

Connect the camera by AP hotspot
Power on the camera, wait until you hear the prompt sound and the camera starts to rotate. Then wait about 30 seconds to configure.

Please do the following steps before connecting:

1. Long press reset to restore the default. long-press the reset button for 8s then release, you will hear the prompt sound and the camera starts to rotate.

2. Wait for 30s to configure, until the camera stops turning.

3. Press the camera reset button 2 times to enter the AP mode and you will hear the voice prompt.
   Use pins or toothpicks
   long-press the reset button for 8s, then press 2 times quickly

4. Select Security & Video Surveillance > Smart Camera (Wi-FI) tap “Wi-Fi Mode”, then tap Next step.

5. Select “AP Mode”.

6. Tap Go to Connect.

7. select the wireless hotspot of the device. (name:Smartlife-XXXX; or other name: SL_XXXX), After the hotspot connection is completed, return to the Tuya app to automatically connect.

FUNCTION OVERVIEW

Home Page
After the camera is connected to Tuya app successfully, it will be listed on the home page.

• The main interface of connecting the camera.
• Create automated routine tasks.
• Get Featured Services.
• Account settings.
• Tap to add a camera and create a scene.

Live Video
Tap the thumbnail on the home page to watch the live video.

1. Landscape view
2. Capture a photo
3. Talk
4. Recording live video
5. Play back the video
6. Picture gallery.
7. Set app background
8. Set night vision
9. Motion tracking
10. Motion detection
11. Sound detection
12. Set Siren

Storage options
Two options are available for the camera.

1. By a memory card
2. Advice use C10 (32-128G)
3. Please reset the camera If no video recording.
4. Videos just played on the app.
5. By cloud
   Go to Home Page, or Cloud Service to subscribe to a cloud plan according to your needs.

Video Playback
Tap Playback on the Live Video to watch the recorded videos in the cloud/ memory card.

1. View the video in landscape.
2. Tap to start recording video, and tap again to end recording.
3. Tap to capture the current page.
4. Turn on/off the audio of the recorded video.
5. Timeline. Slide leftward or rightward on the timeline to play the video.
6. Tap to open the calendar, you can select a video specific to a certain day.

Record Settings
Install a memory card(up to 128G), then go to Live Video > Setting > Record Settings.

Light Mode
Select Live Video > Night Mode or Live video > Light in the live video interface to control the night mode.

Infrared Vision:

Select Live Video > Features > Night Mode.

• Auto: The video will be colorful by day and black & white at night. The IR LEDs will automatically turn on in the darkness.
• On: The IR LEDS are on all day, no matter day or night, the video is black and white.

Full-color night vision:

Select Live Video > Features > Light

• Switch: The floodlight will turn on all the time, and the video will be colorful day and night.

Alarms and Notifications
Please enter Tuya and open the following options.

1. Message Center
2. Setting
3. Alarm Setting

1. The camera will record videos to the cloud or memory card only when motion/human outlines are detected if you subscribe to a cloud plan of Alarm Recording or select alarm recording for your memory card.
2. Apart from recording videos, the camera can also give out alarm sounds and send push notifications when motion/ human outlines are detected.

Device Sharing

Notes:

1. Please make sure your family members have registered a Tuya Smart account before sharing. If sharing fails, please reinstall the app.
2. You can share the camera with as many accounts as possible. However, we recommend 3 accounts at most for a better experience.

• Step 1: Go to Live Video > Setting > Share Device.
• Step 2: Tap Add Sharing.
• Step 3: Enter the Tuya Smart Account you want to share.

TROUBLESHOOTING

Q1. Why did I fail to connect the camera to my phone?

• The camera only supports 2.4GHz WiFi make sure you’ve selected the correct one. If you are using a dual-band router, please contact the router seller or us for further support.
• Avoid using special characters or symbols in your WiFi name and password, such as @~#$%&*, and so on. If the connection failed, please reset the camera and try again.

Q2. Why can’t the camera recognize the TF card?

• The camera does not support hot plugging. Please insert the TF card before powering on the camera, or reboot the camera after inserting the card.
• Please use a high-quality TF card from a reliable brand.
• Please make sure the TF card is installed properly.

Q3. Why can’t I get an app alarm notification?

• Please make sure you have turned on the motion detection alert switch.
• Please make sure your phone system permissions allow our apps to perform message push.
• Make sure you enabled the “Notification setting” > “Enable Notification”.

Q4. How does the camera store video?
The camera supports EXFAT, FAT32 format, Class6, and Class10 TF cards and supports up to 128G. When the TF card is full, it auto-deletes the earlier video and recycles the video.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator (antenna) and your body.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

WARNING:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

IC Statement
This device complies with Industry Canada license-exempt RSS 247 standard (s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This symbol indicates the DC voltage

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU to be recycled or dismantled to minimize its impact on the environment. User has the choice to give their product to a competent recycling organization or the retailer when he buys new electrical or electronic equipment.

After Sale: support_cam@763.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>