acer LCD Monitor BR7 Series BR247Y User Guide
- June 4, 2024
- Acer
Table of Contents
LCD Monitor BR7 series-BR247Y
USER GUIDE
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
-
To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your
location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
• Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. -
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
-
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
-
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
-
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the LCD monitor outside this range may result in permanent damage.
-
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
- Remove the monitor from the packaging.
- Attach the foot stand to the base. (for selected models)
- Turn clockwise to lock. Ensure that the base is locked onto the stand. (for selected models)
- Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)
Connecting Your Monitor to a Computer
-
Turn off your monitor and unplug your computer’s power cord.
-
2-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
2-2 Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s port.
2-3 Connect DP Cable (Only DP-input model) (Optional)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer. -
Connect the Audio Cable. (Only Audio-Input Model) (Optional)
-
Insert the monitor power cable into the power port at the back of the monitor.
-
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
-
Select Power-off USB charge ON/OFF to enable/disable the Power-off USB charge function. (Optional)
External Controls
| No. | Item | Description |
|---|---|---|
| 1 | Power button/indicator | Turns the monitor on/off. Blue indicates power on. |
Amber indicates standby/power saving mode.
2| Hotkey 1, 2 buttons| Press to activate user defined hotkey function.
3| Input button| Press to toggle input sources.
4| Navi/OK button| Press to activate the OSD menu, then use it as a
directional key to highlight the desired function. Press it again to enter a
selection.
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product.
Notice:
In order to prevent damage to the monitor, do not lift the monitor by its
base.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with EMC regulations.
Notice:
Acer monitor is purposed for video and visual display of information obtained
from electronic devices.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified
to comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio
and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void
the user authority, which is granted by the Federal Communications Commission,
to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Disposal of Waste Equipment by Users in Private Households in the European
Union
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
SPECIFICATION
| LCD Panel | Driving System | TFT Color LCD |
|---|---|---|
| Size | 23.8”W (60 cm) | |
| Pixel Pitch | 0.2745 mm (H) x 0.2745 mm (V) | |
| Brightness | 250 cd/m2 (Typical) | |
| Contrast | 100000000:1 Max (ACM) | |
| Viewable Angle | 178° (H) 178° (V) (CR=10) | |
| Response Time | 4 ms (G to G) | |
| Video | R, G, B Analog Interface | |
| Panel Type | In-Plane Switching | |
| H-Frequency | 30 – 85 kHz | |
| V-Frequency | 56 – 76 Hz | |
| Display Colors | 16.7 Million | |
| Dot Clock | 174.5 MHz | |
| Maximum Resolution | 1920 x 1080 @ 75 Hz | |
| Plug & Play | VESA DDCCI/DDC2B |
Power Consumption (at 200 nits)
| On Mode| 18 W
Sleep Mode| 0.5 W
Off Mode| 0.3 W
Input Connector| D-Sub
HDMI (Only HDMI-Input Model) DP (Only DP-Input Model)
Input Video Signal| Analog: 0.7 Vp-p (standard), 75 OHM, Positive HDMI (Only
HDMI-Input Model) (Optional) DP (Only DP-Input Model) (Optional)
Speakers| 2 W x 2 (Only Audio-Input Model) (Optional)
USB| USB 3.0 x 4 (Optional)
Maximum Screen Size| Horizontal: 527.04 mm
Vertical: 296.46 mm
Power Source| 100-240 V, 50/60 Hz
Environmental Considerations| Operating Temp: 0° to 40°C Storage Temp: -20° to
60°C Operating Humidity: 20% to 80%
Dimensions| 540.2 (W) x 379.37 ~ 499.37 (H) x 192.11 (D) mm
Weight (N. W.)| 5.6 kg (net)
Mechanism Specifications| Tilt: -5° to +25° (Only at the highest point can 25
degrees of recline be offered for the angle of elevation)
Swivel: -45° to +45°
Height adjustment: 0 mm to 120 mm Pivot: -90° to 90°
Detachable foot stand: Yes
External Controls| Switch/Buttons| Power Button
Input
Hotkey 1 Menu/Navi/OK
Hotkey 2
Functions| Contrast Mute
Brightness Over Drive
Black Boost Adaptive-Sync
Blue Light Refresh Rate Num
ACM On/Off Language
Super Sharpness OSD Timeout
H. Position (only Analog input model) Transparency
V. Position (only Analog input model) OSD Lock
Clock (only Analog input model) Input
Focus (only Analog input model) Auto Source
Auto Configuration (only Analog input Power-Off USB Charge model) Wide Mode
Gamma Hot Key Assignment
Color Temperature DDC/CI On/Off
Modes HDMI Black Level
sRGB Quick Start Mode
Grayscale Mode Display information
6-axis Saturate Reset All Settings
6-axis Hue Exit
Volume
Specifications vary depending on the model and/or region.
ENERGY STAR®
Acer’s ENERGY STAR-qualified products save you money by reducing energy costs
and help protect the environment without sacrificing features or performance.
Acer is proud to offer our customers products with the ENERGY STAR mark.
What is an ENERGY STAR?
Products that are ENERGY STAR qualified to use less energy and prevent
greenhouse gas emissions by meeting strict energy efficiency guidelines set by
the U.S. Environmental Protection Agency. Acer is committed to offering
products and services worldwide that help customers save money, conserve
energy and improve the quality of our environment. The more energy we can save
through energy efficiency, the more we reduce greenhouse gases and the risks
of climate change. More information refers to http://www.energystar.gov.
Acer ENERGY STAR qualified products:
- Produce less heat and reduce cooling loads and warmer climates.
- Automatically go into “display sleep” within 5 minutes of inactivity.
- Wake the monitor when it is in Active Off mode, move the mouse or press any keyboard key.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks A third-party certification according to ISO 14024
Say hello to a more sustainable product
IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality, and when they are not able to be repaired or upgraded.
This product is a better choice. It meets all the criteria in TCO Certified, the world’s most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that helps drive progress towards a more sustainable future!
Criteria in TCO Certified have a life-cycle perspective and balance
environmental and social responsibility. Conformity is verified by independent
and approved verifiers that specialize in IT products, social responsibility
or other sustainability issues. Verification is done both before and after the
certificate is issued, covering the entire validity
period. The process also includes ensuring that corrective actions are
implemented in all cases of factory non-conformities. And last but not least,
to make sure that the certification and independent verification is accurate,
both TCO Certified and the verifiers are reviewed regularly.
For customers who own the EPEAT registered products’, Acer offers the following services²:
- The availability of at least a 3-year warranty
- For the product life extension’, through the use of compatible parts of after-market, or refurbished with equal or higher specifications, we offer to upgrade, repair or replacement parts up to 5 years after the end of production.
- Product take-back program of Notebooks, Desktops, and Monitors
- Battery take-back program of Battery Pack of Notebooks For more details of the above services, please visit the local Acer website
Message related to battery replacement
For customers who own the EPEAT registered products, your product may contain
batteries that are replaceable once they reach the end of their useful life.
- For products that ship with accessories such as remote controls, keyboards, mice, etc., containing alkaline batteries (AA, AAA, etc.), please refer to your product user guide for instructions on how to replace those batteries. Alkaline replacement batteries are available off-the-shelf at any retail store that carries standard alkaline batteries. Please dispose of spent batteries in accordance with your local waste disposal laws.
- For main product rechargeable batteries, such as those powering notebook PCs, tablets, etc., please refer to your local Acer customer support website or contact your local representative for detailed information on battery replacement services.
¹EPEAT registered products, please visit
htto://www.eoeat.net
²Service availability and costs vary by country: for details, please refer to
the local Acer website or contact local Acer representatives.
³Service for product life extension is available by product and the period of
time may vary by country, please refer to the local Acer website or contact
local Acer representatives for details.
https://eprel.ec.europa.eu/qr/1048041
Product Information for EU Energy Label
Barcode
MC.TTR11.003
4J.5KP01.072 (xx)
