TechnoLine WS 1050 BBQ Thermometer Instruction Manual
- June 9, 2024
- TECHNOLINE
Table of Contents
WS 1050 – BBQ thermometer
Instruction manual
Features
- Meat type and taste level selection
- Current and target meat temperature
- Temperature alert function
- Temperature display in °C/°F
- Count-down/ Count-up timer function
- Backlight
Startup (Monitor)
Remove the battery compartment cover on the back of the monitor. Insert 2 x
AAA batteries in the battery compartment as indicated by the polarity symbols
(+/-). Replace the cover.
Switch the POWER switch on the back of the monitor to ON.\
Startup (Transmitter)
Remove the battery compartment cover on the bottom of the transmitter. Insert
2 x AAA batteries in the battery compartment as indicated by the polarity
symbols (+/-). Replace the cover.
Switch the POWER switch on the bottom of the transmitter to ON.
Insert the temperature probe connector-plug into the socket on the right side
of the transmitter.
After the transmitter is powered up, the red LED starts to flash. Now the
transmitter transmits temperature data to the monitor.
NOTE: If the temperature on temperature probe remains unchanged, the
transmitter every 30 seconds transmits a signal to the monitor. If the
temperature on temperature probe changes more than 1°C, the transmitter will
directly transmit a signal to the monitor.
COOKING WITH TARGET TEMPERATURE
Insert the tip of the temperature probe into the center of the meat.
Take care not to pierce through it! Do not expose any part of the probe to
open flames!
The current meat temperature appears on the LCD screen.
To select meat type and taste level
Press MEAT button to select the desired meat type in the following sequence:
Press TASTE button to select the doneness level (RARE, MEDIUM RARE, MEDIUM,
MEDIUM WELL or WELL DONE). The target temperature appears on the LCD screen.
During cooking, the alert will sound when the meat has reached the target
temperature.
MEAT| BEEF| LAMP| VEAL| HAMBURGER| PORK|
TURKEY| CHICKEN| FISH
---|---|---|---|---|---|---|---|---
SYMBOL| | | | | | | |
WELL| 76-C| 76L| 76t| 71-C| 761| ? 79| 79 C| 58C
M WELL| 73-C| 73-C| 71-C| /| 73-C| /| /| /
MEDIUM| 71-C| 71-C| 62-C| /| 71-C| /| /| /
M RARE| 62C| 62-C| 60-C| /| /| /| /| /
RARE| 60-C| /| /| /| /| /| /| /
To set target temperature manually
Press and hold MODE button for 3 seconds to switch to manual temperature
setting. Press MIN (up) and SEC (down) to select the desired temperature.
Press MODE button to confirm the setting.
During cooking, the alert will sound when the meat has reached the desired
target temperature.
AFTER COOKING
Once cooking is finished, remove the temperature probe by using an oven mitt.
Clean the temperature probe with water and a mild detergent. The monitor and
transmitter clean with a damp cloth.
°C/°F TEMPERATURE DISPLAY
To select temperature display in °C (Celsius) or °F (Fahrenheit), press MODE
button to switch between the individual models.
COUNT-UP/COUNT-DOWN TIMER
The count-up and count-down timers operate independently of the temperature
sensor.
To set count-up timer
If no count-down time is set the timer will act as a count-up timer.
To set count-down timer
Use MIN and SEC to set the desired count-down time.
Press START/STOP button to start the timer. Press START/STOP button again to
pause. During pause, press CLEAR button to reset the time to 0:00.
When the count-down has finished, the monitor will beep. Press any button to
stop beeping sound.
NOTE: The countdown timer will count up to 99:59 minutes.
BACKLIGHT
Press LIGHT button or any other button to illuminate the LCD screen for 5
seconds.
SPECIFICATIONS
Dimensions: | Dimensions: |
---|---|
Power requirements: | Power requirements: |
Temperature measurement rangeResolution: | Temperature measurement |
rangeResolution:
Transmission frequency:| Transmission frequency:
Transmission range:| Transmission range:
Precautions
- This main unit is intended to be used only indoors.
- Do not subject the unit to excessive force or shock.
- Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
- Do not immerse in water.
- Avoid contact with any corrosive materials.
- Do not dispose this unit in a fire as it may explode.
- Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
- Use only alkaline batteries, not rechargeable batteries.
- Install batteries correctly by matching the polarities (+/-).
- Always replace a complete set of batteries.
- Never mix used and new batteries.
- Remove exhausted batteries immediately.
- Remove batteries when not in use.
- Do not recharge and do not dispose of batteries in fire as the batteries may explode.
- Ensure batteries are stored away from metal objects as contact may cause a short circuit.
- Avoid exposing batteries to extreme temperature or humidity or direct sunlight.
- Keep all batteries out of reach from children. They are a choking hazard.
- Use the product only for its intended purpose!
Consideration of duty according to the battery law
**** Old batteries do not belong to domestic waste because they could cause
damages of health and environment. You can return used batteries free of
charge to your dealer and collection points. As end-user you are committed by
law to bring back needed batteries to distributors and other collecting
points!
Consideration of duty according to the law of electrical devices
**** This symbol means that you must dispose of electrical devices from the
General household waste when it reaches the end of its useful life. Take your
charger to your local waste collection point or recycling centre. This applies
to all countries of the European Union, and to other European countries with a
separate waste collection system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>