REGENT DVD D-225 Digital Ferguson User Manual

DVD D-225 Digital Ferguson

DVD D-225 Product Information

• Supported Discs: DVD/CD
• Supported Media: USB
• Video Outputs: HDMI, RCA video
• Audio Outputs: RCA left/right, coaxial digital
• Other Features : Remote control, OSD menu, subtitle support, programmable playback

Product Usage Instructions

Safety Measures

Please read the instruction manual carefully before using the product. To avoid electrical shock, do not open the device casing. Opening the casing will void the warranty. Use only authorized service personnel to open the casing for repair.

Handling and Connection

Connect the DVD player to a standard power outlet using the provided power cord.
For video and audio connection, use the HDMI or RCA video/audio outputs respectively. Make sure to disconnect all devices from their power source before making or changing any connections.

HDMI Connection

1. Use an HDMI cable to connect the HDMI output on the DVD player to the HDMI input on your TV.
2. Set your TV input settings to match the HDMI input used in step 1.
3. Configure your TV resolution settings as desired.

RCA Connection

1. Use RCA cables to connect the RCA video/audio outputs on the DVD player to the corresponding RCA inputs on your TV.

Remote Control Unit

The remote control unit allows you to control various functions of the DVD player. Refer to the user manual for a detailed list of remote control keys and their functions.

Supported Discs and Media

The DVD player supports playback of DVD and CD discs. It also supports media playback from USB devices.

Other Features

The DVD player comes with an OSD menu, subtitle support, programmable playback and other features. Refer to the user manual for more information on these features.

Safety measures

We request that you read the instruction manual and recommendations set forward therein.

• In order to avoid an electric shock, never open the housing. Damage to the warranty seal shall void the warranty.
• Disconnect the device from the mains during thunderstorms or when it is not to be used for an extended period of time. Please remember that the warranty does not cover damage to the equipment caused by a lightning strike.
• Do not expose the device to direct sunlight. Place it away from sources of heat and humidity. Do not cover ventilation ducts, in order to ensure the correct circulation of air.
• Place the device horizontally on a flat, even and stable surface.
• If you move the device from a room that is warm to one that is cold (or vice versa), wait at min. 1 hour before connecting it to the mains. Otherwise, problems may arise.
• The device should be placed away from vases, bottles, aquariums and other water containers in order to avoid damage. Do not touch the mains plug with your bare hands.
• Do not place any objects on the housing of the device. This may cause overheating and reception problems.
• Before starting any maintenance or installation work, disconnect the player from the mains.
• Do not use alcohol or liquids containing ammonia to clean the player. If necessary, clean it with a soft, lint-free cloth moistened with a mild soap and water solution.
  • Do not connect any cables when the power plug is in the socket.
  • Check if you have working cables. Damaged cables can cause a fire.
  • Disconnect the player from the power supply while making all connections.

Downloadable software

• Ferguson has taken every effort to provide users with software updates in order to ensure that the parameters of the device are up to date. Ferguson reserves itself the right to amend, change or modify the software used in the device as it shall choose and without prior notification.
• The latest version of the software is available on the website http://www.ferguson-digital.eu

About the instruction manual

• Ferguson has made every effort to provide the most current information about its products.
• Ferguson does not grant any guarantee as to the contents of the present instruction manual and disclaims any implied guarantees concerning market value or suitability for specific purposes. The information contained herein is an instruction intended to enable the correct usage and maintenance of the player.
• Ferguson reserves itself the right to introduce amendments, changes or translations of the instruction manual without prior notification thereof. For this reason, we recommend you regularly visit our website in order to obtain the latest information.

Markings and signs applied to the receiver

General information

Main features:

• The DVD-video disc playing
• The multimedia files playing

Box content:

• RCU – remote controle unit
• user manual
• RCA cable
• DVD player

Important instructions concerning handling of the device

• The DVD player have the simplified OSD interface, it is allow to brows the media carrier content, you can browse with arrows on the RCU.
  NOTE: File formats that DVD-player do not support can not display in media browser.

• Device settings shows after pressing SETUP button.
  NOTE: Please keep in mind that new software may change the functionality of the receiver. Photographs and descriptions included in the instruction manual are for informational purposes only. If you should notice an error, please report it – we shall make every effort to have it rectified.

Remote Control Unit

Description of buttons:

• Power – Power the unit on and off
• Number Keypad – For Inputting Number Digits
• Menu – To bring up the DVD Player Menu
• Arrows/Enter – Arrows are used for moving around the Menus. Enter is used for Selecting.
• Title – To Show the DVD Title
• Volume – To adjust the DVD Player Volume
• Stop – To Stop the DVD
• DVD/USB – To select between DVD and USB Input
• OSD – On Screen Display
• L/R – Switches between the Left and Right audio channels
• N/P – To Select between NTC and PAL
• Search – To search forward and backward
• Open/Close – To open and close the DVD drawer
• Mute – To mute the DVD Player
• Audio – To change the audio setting
• Goto – To go to a particular title, chapter or time point
• Prog – To play contents of disc in the order you want by programming the track to be played
• Angle – To switch between Multiple Camera Angles
• Setup – To access or exit the SETUP menu
• Subtitle – To switch subtitles
• Skip – To skip forward to back
• Play/Pause – To play or Pause
• Zoom – To enlarge the Picture
• Wide – Change to wide view
• Repeat – To toggle between different repeat modes
• Slow – To view slowly
• Step – Plays video frame by frame

Front panel and rear panel illustration

front of DVD player

1. VD door
2. display window
3. OPEN/CLOSE button
4. PLAY/PAUSE button
5. STOP button
6. STANDBY button
7.  remote receiver window
8. USB

back of DVD player

1. HDMI connector
2. RCA left audio output
3. RCA video output
4. RCA right audio output
5. COAXIAL digital audio output
6. SCART connector

Handling and connection

Power
Plug the attached AC cord into a standard AC power outlet to power the DVD player.

Connecting Video and Audio

Note: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
Note: Both video and audio connections must be made from the DVD Player to your television.

• RCA Stereo Audio Output:

1. Use the RCA Stereo Audio Output to send audio from the DVD player to a television.
2. Required an RCA audio cable.
3. Use the RCA audio cable to connect the RCA Stereo Audio Output to an RCA stereo audio input on a television.
4. Adjust the connected televisions input setting to match the input used in the previous step.

• Coaxial Digital Audio Output:

1. Use the Coaxial Digital Audio Output to send high quality audio from the DVD player to an audio system.
2. Requires an RCA audio cable.
3. Use the RCA audio cable to connect the Coaxial Digital Audio Output to a coaxial digital input on an audio system.
4. Adjust the connected audio system’s input setting to match the input used in the previous step.
5. In the Digital Out portion of the setup menu, adjust to PCM, RAW or off.

• Composite Video Output:

1. Use the Composite Video Output to send video from the DVD player to a television.
2. Requires an RCA video cable.
3. Use the RCA video cable to connect the Composite Video Output to a composite video input on a television.
4. Adjust the connected televisions input setting to match the input used in the previous step.

• HDMI Output (Best):
  Requires a HDMI cable (not Included)

1. Use a HDMI cable to connect the HDMI Output to a HDMI input on a television.
2. Adjust the connected televisions input setting to match the input used in the previous step.
3. Set quality in the video settings.

DVD/CD
Loading a Disc

1. Press the Open/Close button to open the Disc Drawer.
2. Load a disc into the DVD player, label side facing up.
3. Press the Open/Close button to close the Disc Drawer.
4. After a disc is loaded, it will begin playing automatically.

Playing a Loaded Disc

1. Follow the instructions for Loading a Disc.
2. If the disc does not begin playing automatically, press Play/Pause button.

USB Disk/Stick

1. Plug the USB drive into the port.
2. The supported formats should appear in the file browser.
3. Press DVD/USB to switch the mode.
4. Use the navigation cross to navigate in the file browser.

Troubleshooting

Before Requesting Service check the following guide for possible cause of a problem before contacting service.

No picture

| •       Select the correct picture input on the TV.

•       Connect the picture connector to the TV correctly.

•       Turn on the TV.

No sound

| •       Check the audio connections.

•       If you are using an AV receiver check a different connector or input settings.

The playback picture is of poor quality| •       Clean up the disk.

DVD player does not start playback

| •       Insert a disc if there is no disc in the drive.

•       Insert a suitable disc in a supported format.

•       Clean the disc.

•       Insert the disc in the correct direction.

•       Disable the age lock or change its level.

There is a humming or noise

| •       Clean the device with a cloth moistened with alcohol.

•       Clean the disc.

•       Correctly connect the speakers and their components.

•       Move the TV away from the audio equipment.

The remote control is not working properly

| •       Point the remote control at the infrared sensor of the DVD.

•       Use the remote control within 5m.

•       Remove the obstacles.

•       Replace the batteries in the remote with working ones.

Color is distorted or not displayed| •       If the picture is distorted or smudged, check that the color system is set to match that of the TV set.

The ø symbol appears in the display

| •       The DVD software is blocking the function at the moment.

•       The software does not support this function.

•       The function is not available at the  moment.

Technical Specifications

References

• Ferguson Digital – Inteligentne rozwiązania dla domu – Inteligentne domy, budynki, automatyka domowa.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>