Delux M618mini Wireless Ergonomic Mouse Rechargeable User Manual
- June 9, 2024
- DELUX
Table of Contents
Delux M618mini Wireless Ergonomic Mouse Rechargeable
Thank you for choosing this special wireless vertical mouse. Please read the user manual carefully when using this product.
Contents
- Wireless vertical mouse ——Xl
- User manual —–X1
- USB nano receiver ——Xl
- CD driver for optional ——Xl
Button Function
① Left click
② Scroll wheel
③ Right click
④ DPI cycle
⑤ Backward
⑥ Forward
⑦ ON/OFF button
Features
- Vertical mouse, worm bionic shape design.
Installation
Plug the USB connector for wired mouse (or USB Nano receiver for wireless version) to the USB port in the computer, after detecting successfully it will work normally.
Specification
| DPI | 800 /1200 /1600 |
|---|---|
| Polling rate | 125Hz |
| Working Voltage | 1.5V |
| Working Current | <20mA |
Receiver Connection
Equipping the mouse with battery, insert the Nano receiver to the USB port of
your computer, pushing the ON button on the bottom of the mouse, and the
receiver will detect the device automatically, plug and play.
The red light will flash once if you shift the DPI to the first gear, will
flash twice when you shift the DPI to the second gear, etc. Also it will flash
when the voltage is low.
Driver Instruction
Installation
Download the driver from www.deluxworldcom or the CD in the package, install
the driver.
Note: Please make sure this mouse is already connected to computer when
setting the functions in the driver.
Setting
These functions can be customized as below.
Macro setting
Click “Assign Macro” to enter into Macro settings, click NEW and name the macro, and click” Left click” on any blank space below MACRO SELECT to confirm the name. Then Start Record, after finishing the record, please click “STOP RECORD; and click “OK” to save the macro. After choosing certain macro, the background of this macro will turn green, you can edit the macro.
Other functions
Basic: Cut, Copy, Paste, etc.8 functions are available. Advanced: Switch
window, close window, etc.6 functions are available.
Media :Previous track, next track, stop, etc. 7 functions are available.
You can also adjust the speed of tracking, double-click and scrolling. After
setting the functions please click” Apply; if you need default functions just
click” Restore Defaults.”
Building Up the Connection Between Mouse and Receiver
If your mouse cannot work normally, you can try to build up the connection again between mouse and receiver, as following steps:
- Take out the Nano receiver from computer and insert again, it will detect automatically for about 15 seconds.
- Keep the mouse in ON mode and with battery in correct direction.
- Keep the effective distance within 10 CM between the mouse and receiver.
- Press the middle button (scroll wheel) and right button at the same time for about 1~3 seconds, then release it. The connection is being built for about 10 seconds.
- If cannot build up the connection in 10 seconds, please repeat the above steps.
Debugging Tips
- Check the receiver if is connected to the USB port.
- Check the ON/OFF button if in ON mode.
- Check the effective distance between mouse the receiver and shorten it.
- Rebuild up the connection between the mouse and receiver.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>