ZENDURE ZDSATP16 Satellite Plug User Manual

ZENDURE ZDSATP16 Satellite Plug

Product Information:

• Name: Satellite Plug
• Model: ZDSATP16
• Electrical Rating: 100-250V AC, 50Hz
• Load Current: 16A Max
• Wireless Type: Wifi 2.4GHz & Bluetooth
• APP Support: IOS & Android

Product Usage Instructions:

1. Power On/Off & Reset:
   • Short press the button to turn on/off the device.
   • Press and hold the button for 5 seconds to restore factory settings.
2. Power Jack:
   • The red light indicates power on.
   • The blue light flashing indicates start of WIFI connecting.
   • The blue light always on indicates WIFI connected.
3. Control with APP:
4. Add New Device:

  * Requirements: 2.4Ghz Wi-Fi at home.
  * If you only have 5Ghz Wi-Fi router, you will not be able to complete connection.
  * If you are using a dual Wi-Fi router, and it broadcast 2 Wi-Fi signals, make sure that your phone was connected with the 2.4Ghz Wi-Fi signal.
  * If you are using a dual Wi-Fi router but it broadcast only 1 Wi-Fi signal, you will have to manage your Wi-Fi router and change the setting to have 2.4Ghz Wi-Fi.
2. Method 1: Bluetooth to Add Device
3. Method 2: AP to Add Device
4. How to Share the Smart Plug?
5. Voice Skill:
  1. Faction Description
  2. How to Connect with Amazon Alexa?
  3. How to Connect with Google Home?

4. FCC Statement:
   • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
   • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   • Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
   • These limits are designed to provide reasonable protection against harmful interference in a residential installation.
   • This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
   • However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
   • This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.

Title Page

1. LOGO：
2.  Heading Satellite Plug User Manual
3. Model：ZDSATP16

**Inner Page

** SPECIFICATIONS

• Name: Satellite Plug
• Model: ZDSATP16
• Electrical Rating: 100‐250V AC,50Hz
• Load Current: 16A Max
• Wireless Type: Wi-Fi 2.4GHz&Bluetooth
• APP Support: IOS& Android

Product Overview

Power on/  Reset

1. Short Press the button to turn on/off
2. Press and hold for 5s to restore factory setting.

Wireless/Power indicate

1. Power On :the red light on
2. Start WIFI Connecting: the blue light flashing
3. WIFI Connected :the blue light is always on

Control With APP

1. Add New Device

Tips: Requirements: 2.4Ghz Wi‐Fi at home

• If you only have 5Ghz Wi‐Fi router, you will not be able to complete connection.
• If you are using a dual Wi‐Fi router, and it broadcast 2 Wi‐Fi signals, make sure that your phone was connected with the 2.4Ghz Wi‐Fi signal.
• If you are using a dual Wi‐Fi router but it broadcast only 1 Wi‐Fi signal, you will have to manage your Wi‐Fi router and change the setting to have 2.4Ghz Wi‐Fi.
  • Method1:Bluetooth to Add Device
  • Method1:AP to Add Device
  • how to share the smart plug?

Voice Skill

1. Faction describe ration
2. how to connect with amazon Alexa?
3. how to connect with Google Home?

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

WARNING

• Plug in fully to the wall outlet while using.
• Do not insert a conductor or other tools to the socket hole.
• If there is radio frequency interference, it might affect the operation.
• Indoor use only.
• Do not use in bathroom and other damp locations.
• Please ensure the security of the electricity, resistive load current 16A Max.
• Please keep the device out of the reach of children to avoid danger.

Warranty
The product carries a one‐year warranty from purchase date. Please feel free to contact us when you have any product problem or suggestions.
Customer Service Email:

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>