SENSSUN iN4901D Smart Nutritional Scale Instruction Manual

SENSSUN iN4901D Smart Nutritional Scale

DEAR USERS:
Thank you for using our Smart Nutritional Scale. Please read and keep the manual in order to use the scale correctly.
This series of products can help you save and keep track of nutritional information on your smart device. The scale transfers data to smart device via Bluetooth technology and also can draw the tendency of nutrient intake in order to check the nutrition intake status at any time.
You’ll get the first step in dietary management by our App and scale.

FEATURES

1. With high-precision load cell
2. Indicate volume of water and milk
3. With zero / tare function
4. Low battery power / Overload indication
5. Auto-off
6. Bluetooth function
7. Measure calories, sodium, fat, protein, carbohydrates, cholesterol, dietary fiber and so on.
8. History data can be recorded through the App, and trends can be viewed.
9. You can view various nutrient intake analysis, daily nutrient intake analysis and so on through the APP.

TO REPLACE BATTERY

2 x 1.5V or 3 x 1.5V(AA/AAA) batteries(excluded) Open the battery cover. Install new batteries by putting one side of the battery down first and pressing down the other side.
(Please observe the polarity)

LED ICONS INDICATION

LED display differs from one to another, so the above icons are indicative only.

BUTTONS FUNCTION

MODE CHANGING, UNIT CHANGING BUTTON:

ON / OFF,ZERO / TARE BUTTON:

Note:

1. Above buttons are for indicative only.
2. UNIT button for some items are on bottom of the scale, please set the unit there if needed.
3. Buttons UNIT and are indicative in this manual.

MODE / UNIT CONVERTION

Press UNIT button to convert the mode or unit you need after turning on the scale. The mode or unit can be converted circularly.

Note:

1. UNIT button for some items are on bottom of the scale, please set the unit there.
2. The unit system of scale depends on scale destination or the requirement of distributor.

WEIGHING

1. Place the scale on a solid and flat surface. Put a bowl (if any) on the scale.
2. Press   button to turn on the scale.
3. Press UNIT button to convert to weighing mode.
4. Load weighing object on scale(or bowl) to start weighing. LED will show the weight reading.

VOLUME MEASURING

1. Place the scale on a solid and flat surface.
2. Press button to turn on the scale.
3. Press UNIT button to convert the mode to Water or Milk volume mode.
4. Put a container on the scale.
5. Press   button for Zero or Tare.
6. Pour liquid (water or milk) into the container, LED shows the volume of the liquid.

ZERO & TARE FUNCTION
You can weigh different loads consecutively without removing loads from the scale. Put the first load on the scale, get weight reading. Press button to reset the display reading to “0” before adding next load. You can repeat this operation.

Condition 1: “ZERO” function
When total sum of all loads on scale ≤4% of scale’s max.weight capacity: LED will show “- – – – -” or “0g” each time is pressed. “- – – – -” means not stable, please wait for a moment. “0g” and meanwhile an icon “o” on the LED mean ZERO function is activated. Max.weight capacity remains unchanged.

(For example:
When capacity is 5kg, 4% is 200g; When capacity is 10kg, 4% is 400g)

Condition 2: “TARE” function When total sum of all loads on scale 4% of scale’s max.weight capacity:
LED will show “- – – – -” or “0g” each time is pressed. “- – – – -” means not stable, please wait for a moment. “0g” and meanwhile an icon “T” on the LED mean TARE function is activated. Max.Weight capacity is reduced by total weight of all loads.

(For example:
When capacity is 5kg, 4% is 200g; When capacity is 10kg, 4% is 400g)

Under this condition:
You can recall the total weight of current loads during the weighing, by pressing button. If you want to continue the weighing, just press to reset the display to “0” again.

WARNING

• OVER LOADED WARNING
  When LED shows “Err”, it is over loaded( Max capacity is shown on product), please take off the loads to prevent damage to the scale.

• LOW BATTERY WARNING
  When LED shows “Lo”, battery power is low, please replace with new battery (ies)

• When LED shows “E01”, it indicates that the Bluetooth communication is abnormal. Please take out the battery for 3 seconds and then reinstall the connection.
  If the problem persists, please contact your dealer.

AUTO OFF (BATTERY POWER SAVING MODE)

If there is no operation or weight changing in several minutes, scale will be auto off.

MANUALLY SHUT OFF

To maximize battery life, press and hold for seconds to turn off the scale after using.

ADVICE FOR USE & CARE

1. Clean the scale with slightly damp cloth. DO NOT immerse the scale in water or use chemical/corrosive cleaner. Keep the scale in cool dry place.
2. All plastics parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods. (Avoid contact with acids citrus juice.)
3. Always use the scale on a solid, flat surface, keep the scale unmoved when weighing.
4.  This product is precision instrument, please handle with care; Do not strike, shake or drop the scale.
5. If fail to turn on, please check whether battery(ies) are installed or battery power is low.
6.  Keep away from high temperature, do not strip the scale arbitrarily.
7.  This product can’t be discarded as household garbage and should be sent to collection points for electrical and electronic equipment.
8. Designed for family use only, not for commercial use.

APP INSTRUCTION

1. Get the App
   • Scan the QR code on the right side to obtain the App.
   • At the “App Store” or “Google Play”, search keyword “Nutribalan” to download.
2. Bluetooth setting
   • Turn on the Bluetooth on the smart device
   • Turn on the scale
3. Create a new user
   • Run the App, finish the registration and personal profile.
4. Weigh and measure
   • Turn on the scale
   • Put the food on the scale, search the food in the App
   • Save the weight and nutrient of the food
   • If it fails to find the food in the App, you can customize.
5. Review history
   You can view the history data, various nutrient intake analysis, daily nutrient intake analysis and so on.
   For further information, please refer to the instruction in App.

FQA

The App can not synchronize the data from the scale

• Please ensure the connection between smart device and scale is on
• Please ensure the Bluetooth function on smart device is on
• Please ensure the scale is power on, and within the valid range of signal coverage.
• Check whether the battery power is running low, please replace with new batteries.
• Relaunch the App
• Reboot the smart device and re-establish the connection with scale

Bluetooth connection failed

• Please ensure only one device is setting up connection with scale
• Please ensure your device is equipped with Bluetooth 4.0 or above

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Manufacturer: Zhongshan Camry Electronic Co., Ltd.
Address: Baishawan Industrial Park,Qiwan Road (N),
East District,Zhongshan City, Guangdong Province

Postal Code: 528403
Tel: 0760-88235622
Fax: 0760-88235600
Email: sales@camry.com.cn
The product picture is indicative only. Appearance specifications please in kind prevail.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>