SENSSUN VP-SC001 Bluetooth Personal Scale Instruction Manual

SENSSUN VP-SC001 Bluetooth Personal Scale

Weight Scale Setup

Battery Activation or Installation

First use:
If batteries are installed-simply pull the plastic pull tab from the battery door on the back side of the scale.

If batteries are not installed-open the battery door on the back of the scale as shown below and install the batteries according to the polarity markings in the battery case.

Note:

• After installing the batter, please close the battery cover.
• Please remove the batteries if the scale is not used for long periods of time (more than 3 months).

**Weight Unit Conversion

**

The unit conversion button is at the bottom of the scale. Gently step on the scale to turn on. Press the button to select either LB or KG3 and it will be displayed on the LED display.

Note:

• There are KG and LB units on the scale, no ST: LB unit;
• There are ST: LB unit in the App. When App is converted to ST: LB unit, the scale is not synchronized with the App.

Download and Set up the Application

• Go to the “App Store” or “ Google Play”, and search “MovingLife” to download the Application.
• Or scan the QR code below with your phone.
• We recommend starting with a Visitor account. Data will be stored on your phone-not in the cloud to best protect your privacy.

1. Tap “Start” then the app will guide you through the setup process, save the data when you are done.
2. Add the Weight Scale device
3. Allow “MovingLife” to use Bluetooth when prompted. Make sure Bluetooth is turned on.
4. Tap “IB-A3” in this example to add the weight scale
5. Install batteries for the scale or fully charged
6. Gently step on the scale to turn on
7. Make sure your phone is close to the scale
8. Allow “MovingLife” to access your Apple Health on iOS phone. Select allow writing Weight data. Be sure to use the same email address that is connected with your Virgin Pulse account.
9. For Android phone users, you may have to go to “Me” on the bottom right corner of the app, tap “Setting” on top, then enable Google Fit. Be sure to use the same email address that is connected with your Virgin Pulse account.
10. After taking a measurement with the “MovingLife” app open on your phone, the data will show in your Virgin Pulse account a few minutes later. Make sure your Virgin Pulse account is connected to Apple Health or Google Fit.
11. Congratulations! Setup is complete.

Note: In case you missed setup sharing data with Apple Health, Google Fit, or Fitbit.

Open the “MovingLife” app, tap “Me” at the bottom of the screen, tap “Settings”, then enable share data with Apple Health or Google Fit. It can share data with Fitbit App too.

1. iOS
2. Android

Store data in the cloud – not recommended

Open the App and turn on the Bluetooth in your phone, sign up your account and follow the guidelines to set up your profile and connection step by step. The scale has to be on when start to connect with it.

All measurements you take can be saved in history by getting access to your own account.

If you do not receive an Authenticode in the email, please check your Spam or Junk folder. Please allow to write data to Apple Health or Google fit when prompted. Also, allow MovingLife to use Bluetooth.

Tips:

• Ensure that the personal information is true and correct so that we better provide more comprehensive scientific guidance.
• As the APP is constantly upgrading, if there is any difference, please refer to the actual display that prevails in the APP.

Start Measurement

1. Place the scale on a hard, flat surface (not a carpet or mat) with the “MovingLife” app open on your phone.
   Note: Placing on carpet may cause inaccurate measurements or tipping.

2. Gently step on the scale, then the scale will be automatically turned on.
   When the digits “0.0 lb” are shown on the display, the scale is ready for use.
   Stand evenly on the scale without moving and wait until your weight shown on display is stable and locked.

3. Stand on the scale until the display digits flash 3 times, showing your final measurement. Your results will show in the App, only showing your weight and BMI.

Warning Indications

About the Bathroom Scale

The product is a smart bathroom scale with a high-precision strain gauge sensor, which can help you to store and keep track of your weight on a smartphone. This scale can transmit your weight data to your smartphone via Bluetooth technology, as well as make a graph of your weight results, from which you can keep track of the trend anytime. Download the App on your phone to use the Bluetooth scale. And you will start your first step of weight control.

Advise for Use & Care

1. Do not use the scale in a humid, overheated environment. (Temperature range from 41 F to 95 F.)
2. Stand on the scale steadily. Tip-over will lead to a fall when you step on the edge of one side of the scale.
3. Do not drop, shock, or strike the scale as it is a precise instrument.
4. Keep the scale clean. Do not use an acid cleaning agent.
5. Do not use the scale on the place with an intense shake. Keep standing firmly on the scale when in use.
6. When the battery runs out, please remove the battery in time to prevent leakage of the battery and lead to scale body corrosion;

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>