SAMSUNG QB98T 98 Inch 4K UHD Standalone User Guide

: June 9, 2024
: Samsung

Table of Contents

SAMSUNG QB98T 98 Inch 4K UHD Standalone
Checking the Components
Ports
Connecting and Using a Source Device
Parts
Specifications
Wall Mount Kit Specifications
Contact SAMSUNG WORLD WIDE
Troubleshooting Guide
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SAMSUNG QB98T 98 Inch 4K UHD Standalone

The color and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.
Download the user manual from the following Samsung Website for further details. http://www.samsung.com/displaysolutions

Checking the Components

Contact the vendor where you purchased the product if any components are missing.
Components may differ in different locations.
- Quick Setup Guide
- Regulatory guide
- Batteries (AAA x 2) (Not available in some locations)
- RS232C adapterWarranty card (Not available in some locations)
- Power cord
- Remote Control

Ports

Connects to MDC and the Internet using a LAN cable. (10/100 Mbps)
Connect to a USB memory device.
The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work.
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable. MAGICINFO IN: Connects to a network box using DP-DVI cable to use Magicinfo.
Connects to MDC using an RS232C adapter.
Connects to MDC using an RS232C adapter.
Receives sound from a source device via an audio cable.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to a source device using a HDMI cable or HDMI-DVI cable.
Connects to another product using a HDMI cable.
Connects to a PC using a DP cable.
Connects to another product using a HDMI cable.
Connect to a USB memory device.
The USB ports on the product accept a maximum constant current of 0.5A. If the maximum value is exceeded, USB ports may not work.
Outputs sound to an audio device via an audio cable.
Connects to an external IR cable that receives signals from the remote control.

Connecting and Using a Source Device

Connecting to a PC

Connecting to a Video Device

Connecting to an Audio System

Connecting the LAN Cable

Use Cat7(STP Type) cable for the connection. (10/100 Mbps)
Shielded Twist Pair

Connecting to MDC

For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website. http://www.samsung.com/displaysolutions

Parts

Remote sensor
Press a button on the remote control pointing at the bottom of the product face to perform the function. The remote control sensor is located on the bottom of the product.
*Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
Power button
Power indicator

Specifications

Model Name	QB98T / QB98T-B

Panel

| Size| 98 CLASS (97.5 inches / 247.7 cm)
Display area| 2158.848 mm (H) x 1214.352 mm (V)

Power Supply

| AC100-240V~ 50/60Hz

Refer to the label at the back of the product as the standard voltage can vary in different countries.

Environmental considerations

| ****

Operating

| Temperature: 32 °F – 104 °F (0 °C – 40 °C)

Humidity: 10% – 80%, non-condensing

Storage

| Temperature: -4 °F – 113 °F (-20 °C – 45 °C)

Humidity: 10% – 90%, non-condensing

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
For detailed device specifications, visit the Samsung website.

Wall Mount Kit Specifications

Contact SAMSUNG WORLD WIDE

Country/Area	Customer Care Center
U.S.A	1-800-SAMSUNG (726-7864)
CANADA	1-800-SAMSUNG (726-7864)
ARGENTINA	0800-555-SAMS (7267)
BOLIVIA	800 107 260

BRAZIL

| 0800 555 0000 (Demais cidades e regiões) 4004-0000 (Capitais e grandes centros)
CHILE| 800 726 786

COLOMBIA

| Bogotá en el 600 12 72

Sin costo en todo el pais 01 8000 112 112 Y desde tu celular #726

Troubleshooting Guide

Issues	Solutions
The screen keeps switching on and off.	Check that the cable between the

product and the PC is connected correctly.

No Signal is displayed on the screen.

| Check that products (including source device) are connected correctly with a cable.
Check that the source device connected to the product is powered on.
Depending on the type of external device, the screen may not display properly. In this case, connect it with the HDMI Hot Plug function turned On.

Not Optimum Mode is displayed.

| This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications.