FOREVER JS-200 PRO Car Jump Starter User Manual

JS-200 PRO Car Jump Starter
User Manual

JS-200 PRO Car Jump Starter

Proper disposal of used equipment
This device is marked with a crossed-out garbage container symbol, in accordance with the European Directive 2012/19/ EU on Waste Electrical and Electronic Equipment
(WEEE). Products marked with this symbol should not be disposed of or discarded with other household waste at the end of their service life. The user is obliged to dispose of waste electrical and electronic equipment by delivering it to a designated point, where such hazardous waste is recycled. The collection of this type of waste in separate locations and the proper recovery process contributes to the conservation of natural resources. Proper recycling of waste electrical and electronic equipment is beneficial to human health and environment. For information  on where and how to dispose of used electronic equipment in an environmentally safe manner, the user should contact the relevant local authority, the collection point or the point of sale where the equipment was purchased.
Proper disposal of used battery
In accordance with EU Directive 2006/66/EC, as amended by Directive 2013/56/EU on the disposal of batteries, this product is  marked with a crossed-out garbage container symbol. This symbol means that the batteries used in this product should not be disposed of with ordinary  household waste, but  handled in  accordance with the directive and local regulations. Do not dispose of batteries with unsorted  municipal waste. Battery users must use available collection network for these items, that allows for their return, recycling and disposal. Within the EU, the collection and recycling of batteries is governed by separate procedures. To learn more about existing battery recycling procedures in your area, contact your city hall, waste management agency or landfall.
Declaration of Conformity with European Union Directives
Tel Force One S.A. hereby declares that this product conforms to the basic requirements and other provisions of the “new approach” Directives of the European Union. Thank you for buying Forever jump starter. Before using the product, please read the manual carefully to learn more about the functions and operation way. Do not modify or repair jump starter. Doing so may result electric shock or another’s user injury, complete breakdown of jump starter or loosing warranty. We hope that you will enjoy the product by Forever.
Set includes

• jump starter
• car charger
• travel charger
• 4in1 USB cable with USB-C, *Lightning, mini USB, micro USB connectors
• jumper cables
• user’s manual

Appereance

• 12 V 200 A auto starter output ⎓
• 15 V ⎓ 1 A input
• 5 V ⎓ 2,1 A USB output
• 5 V ⎓ 1 A USB output
• battery life indicator
• ON/OFF button
• LED torch

Specification

Capacity: 40 Wh
Cell lifetime: min 200 charging cycles
Engine start current: 200 A (standard) up to 3s / 400 A (maximum) up to 3s
IQ   USB outputs: 5 V ⎓ 3.1 A (15.5 W), (3) 5 V ⎓ 2,1 A (10,5 W), (4) 5 V ⎓ 1 A (5 W)
Charging input: 15 V ⎓ 1 A (15 W)
Working temperature: from -20°C to +60°C
Charging
To charge the travel battery, use the charger 15 V ⎓ 1 A, which is included in the kit. Plug the cable into a power source with a voltage of 110-240 V ⎓. In next step plug the cable from the side of the charger connector in the charging input of battery. Charging is indicated by flashing LED diodes. Blue LED diodes will light up in sequence in the following order starting from the right side of indicator:

• 1 LED – charged at 25%
• 2 LEDs – charged at 50%
• 3 LEDs – charged at 75%
• 4 LEDs – charged at 100% (fully charged)

When fully charged, disconnect battery from the power source.
To check the battery power level you should shortly press the ON/OFF button (look at Appearance). If no of the LED diodes lights up, this means that  you need to charge the device. LEDs will turn off automatically.
Turn ON/turn OFF white LED
In order to turn on the white LED light, you need to press long ON/OFF button.
Charging modes
To change mode of white LED, press short ON/OFF button. Modes will change to the scheme: „Steady light ››› Slow blinking ››› Rapid blinking ››› LED OFF”
Charging external devices
To charge an external device, you need to use an USB cable with connector matching to your external device’s input. Place the USB end in the travel battery output and the second end in your external device’s input. Charging starts automatically and lasts until external device is fully charged.
Travel battery is equipped with two USB outputs. They differ in the maximum charging current. 5 V ⎓ 2,1 A output allows you to receive from the battery up to 2,1 A of  current, which may be necessary to charge devices  with higher energy requirements, such as tablet. 5 V ⎓ 1 A output allows you to receive from the battery  up to 1 A of current and will be sufficient to charge a smartphone.
IMPORTANT: While using both USB outputs together max current will be 1 A for each output.
Starting car

1. Pin jumper cables to output for jumper cables.
2. Pin pluses clamp of battery (red wire) to pluses clamp on the car accumulator.
3. Pin minuses clamp of battery (black wire) to minuses clamp on the car accumulator.
4.  Start the car.
5. After successful launch of the car you need to unpin cables in reverse way: first unpin black cable, and then unpin red cable.

IMPORTANT: High current! Always avoid clamp contact together and clamps contact with body. It can start the fire and can cause direct threat to life!

Safety rules

Read this manual carefully and keep it before using the device:

1. DO NOT use the device to start your car when the remaining capacity is less than 50% or when it is still hot.
2. The device is designed for starting 12V car batteries and should not be used for any other purpose.
3. The device cannot be used instead of a car battery.
4. Do not remove the cover of the device. There are no user-repairable parts inside. All repairs should be performed by a service technician.
5. To reduce the risk of damage, closely supervise the operation and storage of the device Children should not have access to the device.
6. Do not use the device more than 3 times in a row, as the device may overheat, malfunction or be damaged.
7. Protect the device from contact with water and moisture to avoid electric shock.
8. Use only original parts/accessories provided by the manufacturer.
9. The company is not responsible for any personal or property damage caused by improper use of the product.

Lightning is a trademark of Apple Inc., registered in the U.S. and other countries.
www.forever.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>