Sygonix 2256497 USB Charging Adapter Rotatable 2x USB 1x type-C User Manual

Sygonix 2256497 USB Charging Adapter Rotatable 2x USB 1x type-C

Intended use

The product is suitable for supplying power or charging up to three compatible USB devices (USB-A connections with item no. 2256497) as well as USB-A and USB-C® connections (item no.: 2256498). One charging output is Quick Charge- enabled or is USB-C® with item no.: 2256498). Power supply of the USB charging adapter is provided by a regular home mains socket with a protective earth contact. The mains line is looped through to a socket with a protective earth contact on the front of the USB charging adapter, to which any load can be connected (max. 16 A). The socket integrated into the product has enhanced protection against contact and can be rotated by 180˚. The USB connections on the product have overload and short-circuit protection. This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bathroom) must be avoided under all circumstances. For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes other than those described above may damage the product. In addition, improper use can cause hazards such as a short circuit, fire or electric shock. Read the ope-rating instructions carefully and store them in a safe place. Only make this product available to third parties together with its operating instructions. This product complies with statutory, national and European regulations. All company and product names contained herein are trademarks of their respective owners. All rights reserved.

Delivery content

• USB charging adapter
• 3 x Sticker
• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Explanation of symbols

• The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to an electric shock.
• The symbol with an exclamation mark in a triangle is used to highlight important information in these operating instructions. Always read this information carefully.
• The arrow symbol indicates special information and tips on how to use the product.
• This product must only be used in dry, enclosed indoor areas. It must not become damp or wet, as this may cause a fatal electric shock!
• This symbol reminds you to read the operating instructions included with the pro-duct.
• This product has been CE tested and therefore complies with the necessary national and European regulations.

Safety information

Read the operating instructions and safety information carefully. If you do not follow the safety information and information on proper handling in these operating instructions, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/gua- rantee.

General information

• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dange-rous plaything for children.
•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapours and solvents.
•  Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stress.
•  Handle the product carefully. Jolts, impacts or a fall even from a low height may damage the product.
• Consult a technician if you are not sure how to use or connect the product, or if you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a specialist repair centre.
•  If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.

Connected devices

• Always observe the safety information and operating instructions of any other de-vices which are connected to the product.

Electrical safety

• Before connecting the product to the mains, make sure that your local AC mains voltage matches the specifications on the nameplate.
• The product’s mains socket is designed to protection class I. Only use an earthed mains socket (230 V/AC, 50 Hz) connected to the public grid to power the product.
• Never pour liquids over electrical devices or place objects filled with liquid next to the device. If liquid or a foreign object enters the interior of the device never-theless, first power down the respective mains socket (e.g. switch off the circuit breaker) and then pull the mains plug from the mains socket. Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm one. This may cause condensation to form, which can destroy the product. Allow the product to reach room temperature before connecting it and putting it into use. This may take several hours.
• The mains outlet must be located near to the device and be easily accessible.
• Always use the grips on the side of the plug to unplug the adapter from the mains socket.
• Unplug the mains plug from the mains socket if you do not plan to use the product for an extended period of time.
• For safety reasons, disconnect the mains plug from the mains socket during thun-derstorms.
• Never insert or unplug the mains plug when your hands are wet.
• Do not use the product in very dusty areas. There is a danger of fire and explosion!
• Never overload the product. Observe the maximum connected load (V x A) in ‘Technical data’.
• Do not connect in series! This can lead to an overload of the product! Fire hazard!
• Plug the earthed mains plug on the back of the USB charging adapter directly e.g. into a wall socket.
• Do not operate while covered! At higher connected loads, the USB charging adap-ter will get hot, which may lead to overheating posing a risk of fire if it is covered!
• De-energised only if unplugged.

Persons and product

• Use the connection for IT devices only.
• Always switch off the connected device before connecting/disconnecting the pro-duct.
• The product generates heat during use. Ensure that there is sufficient ventilation. Do not cover the product during use.
• Do not short-circuit the USB outputs.
• Use the product only in a temperate climate, never in a tropical climate.
• Never leave the product and the connected device unattended during use.
• Always comply with the accident prevention regulations for electrical equipment when using the product in industrial facilities.

Controls

1. Power LED
2. USB connections (USB3.0)
3. Quick Charge port (QC/USB-C®)
4. Power socket
5. Mains input connector, rotatable by 180°

Operation

• Plug the USB charging adapter with the mains input connector (5) into an earthed mains socket connected to the public grid. The blue power LED (1) on the bottom front lights up.
• Plug electrical loads with a power of up to 3680 W into the mains socket (4). Do not overload the socket.

Do not use any extension cables, but plug the product directly into the mains socket!

• If a USB device to be connected has an on/off switch, switch it off before connecting it.
• For the product with item no.: 2256497, connect the USB device to one of the USB con-nections (2) on the front of the USB charging adapter. You can connect another compatible USB3.0 device to the second USB connection (2). USB connection (3) is used for quick charging via a USB3.0 connection.
• For the product with item no.: 2256498, connect up to two USB devices to the USB connec-tions (2) and one device to the USB-C® connection (3) using a USB-C® cable.
  • The power LED (1) on the product with item no.: 2256497 lights up at increased brightness when USB loads are connected and in operation. On the other hand, the power LED on the product with item no.: 2256498 does not change its brightness when USB loads are connected and in operation.
• If a USB device has an on/off switch, switch it on now.
  • The total current provided to the two normal USB outputs (2) on the front of the USB charging adapter is 2.4 A. This is automatically distributed if two USB devices are connected.
• The Quick Charge port (QC/USB-C®) (3) should be used as a charging port on both pro-ducts.
  • Do not overload the USB charging adapter, as it can damage the product. The USB charging adapter detects the charging current required by a mobile phone, smart-phone or tablet via its integrated electronics.
  • However, due to great variety of devices it cannot be guaranteed that all devices can be charged with maximum possible charging current (as is the case with an original charger matching the device).
• If the USB device is no longer needed, disconnect it from the USB charging adapter.
• If there are no USB devices connected to the USB charging adapter, unplug it from the mains socket to save energy.

Care and cleaning

• Place the sticker in your preferred language on the device at a suitable location if that is necessary.
• This product does not require any maintenance. Never attempt to dismantle it.
• Before cleaning, disconnect the product from the mains voltage and unplug the mains plug from the mains socket. If a USB device is connected, disconnect it from the USB charging adapter as well.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the enclosure or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
•  at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

Data according to EU regulation 2019/1782

5.0 V/DC, 2.4 A max., 12.0 W

(each port)

USB-A 2 :

5.0 V/DC, 2.4 A max., 12.0 W

(each port)

Total USB-A output:

12.0 W (share)

USB-A (fast charge):

3.6 – 6.5 V/DC, 3.0 Amax.,

19.5 W

6.5 – 9.0 V/DC, 2.0 A max.,

18.0 W

9.0 – 12.0 V/DC, 1.5 A max.,

18.0 W

| USB-A 1:

5.0 V/DC, 2.4 A max., 12.0 W

(each port)

USB-A 2:

5.0 V/DC, 2.4 A max., 12.0 W

(each port)

Total USB-A output:

12.0 W (share)

USB-C ® :

5.0 V/DC, 3.0 A max., 15.0 W

9.0 V/DC, 2.0 A max., 18.0 W

12.0 V/DC, 1.5 A max., 18.0 W

Average active

efficiency

| 82.2 %| 81.7 %
Efficiency at low

load (10 %)

| 80.0 %| 80.0 %
No-load power consumption| 0.21 W| 0.21 W

Others

• Output voltage/current: 230 V/AC, 50/60 Hz, 16 A (for socket max. 3680 W)
• Socket: 1x alternating voltage
• Enhanced protection
• against accidental contact: Yes
• Operating conditions: 0 to +40 °C, max. 95 %
• relative humidity: (non-condensing)
• Storage conditions: – 25 to +70 °C, max. 95 %
• relative humidity: (non-condensing)
• Dimensions (W x H x D): 54 x 125 x 75 mm
• Weight: 160 g (2256497) / 158 g (2256498)

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or capture in electronic data processing systems, requires the prior written approval of the publisher. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.

References

• Conrad Electronic » All parts of success
• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>