ooni GR21535 Volt 12 Electric Pizza Oven Instruction Manual
- June 9, 2024
- Ooni
Table of Contents
GR21535 Volt 12 Electric Pizza Oven
Instruction Manual
GR21535 Volt 12 Electric Pizza Oven
WARNING
The appliance can be used by children aged 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge under supervision, or if they have been given instruction about
using the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children unless they are
older than 8 and supervised.
Keep the appliance and its cord out of reach of children less than 8 years.
The appliance is suitable for outdoor use.
Before turning off the power switch or disconnecting from the outlet, let the
oven cool down in standby mode. This will take approximately 10 minutes.
The appliance is to be connected to a socket-outlet with an earthing contact.
The supply cord should be regularly examined for signs of damage, and if the
cord is damaged, the appliance should not be used. The supply cord must be
replaced by the manufacturer, its service agent or similarly qualified persons
to avoid a hazard.
The appliance must be supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30 mA.
The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
The appliance is intended to be used in household applications only.
Do not open the door in the event food spontaneously ignites. Any flames will
extinguish themselves.
Do not place oil or baking paper directly on the baking stone.
Do not use the appliance without the baking stone in place.
Do not rest anything on the door once open. Avoid cold items of food dropping
onto the inside of the door.
Do not use oven cleaners and metal scourers to clean this appliance.
Do not use a hose or pressure washer to clean this appliance Only store the
baking stone inside the oven.
Do not lean or set items on top of the oven.
This appliance is intended for use up to a maximum of 3,000 meters above sea
level.
This appliance generates heat during use. Do not touch hot surfaces. Use
handles or knobs. Always protect your hands with non-slip oven mitts or
similar.
Parts List:
a. Ooni Volt 12
b. Baking Stone
Setting Up
2.1 | Step 1:
Take your Ooni Volt 12 out of the packaging. There are handholds on the side
of the oven.
2.2 | Step 2:
Find a clean, flat, stable surface for your Ooni Volt 12. Clear the space
before moving your oven into position. Remove any flammable objects and
materials, including tablecloths.
Think about ventilation when choosing a suitable place for your oven. Very
high cooking temperatures can sometimes cause food to burn, which can produce
smoke.
2.3 | Step 3:
Unwind the power cord. Make sure that the power switch is in the off position
before plugging your Ooni Volt 12 into a power outlet. This oven is designed
to be used with 230V outlets only.
Caution: The Ooni Volt 12 comes with a short power supply cord to reduce
the risk of the oven being pulled off the countertop. If you’re using an
extension cord, make sure that its marked electrical rating is at least as
great as the appliance’s electrical rating (1600 W). Route the extension cord
so that it can’t be pulled on or tripped over to minimize the risk of the oven
falling.
2.4 | Step 4:
Make sure that the cable doesn’t run under the oven or drape over the edge
of the countertop or tabletop where it can be pulled on or tripped over.
2.5 | Step 5:
Remove the baking stone from its packaging and slide it into the Ooni Volt 12.
Caution: Avoid hitting the temperature sensor on the left wall of the oven’s
cavity when moving the stone into position. See image 2.5 b.
2.6 | Step 6:
Make sure there is space around the product to allow for safe operation.
Enough space should be left to access the ON/OFF switch on the right-hand
side. The area above the oven should be generally clear. Do not place inside
an enclosed space.
2.7 | Step 7:
To allow the oven door to open fully, position the oven so the front is close
to the edge of your surface.
2.8 | Step 8:
Turn on your Ooni Volt 12 with the power switch on the side. The oven will
enter standby mode.
2.9 | Step 9:
Touch the power button located on the left of the control dials to bring the
oven out of standby.
Dial Functions
a. Standby/Power
b. Timer Dial
c. Timer Icon
d. Temperature Dial
e. Temperature Icon
f. Maximum Temperature
g. Balance Dial
h. Balance Icon
i. Base Element
j. Top Element
Seasoning
– Pulsing LED
10 – Solid LED
4.1 | Step 1:
Before your first cook, run the oven for 20 minutes to season it. To heat your
oven, rotate the temperature dial to 450°C. Your oven will start to heat
immediately.
4.2 | Step 2:
Rotate the timer dial to 20 minutes. When the timer expires, switch off your
Ooni Volt 12 and allow it to cool.
Power Off
5.1 | Step 1:
Simply touch the power button on the front of the oven to power off the oven.
The oven will switch to standby mode.
WARNING Before turning off the power switch or disconnecting from the
outlet, let the oven cool down in standby mode. This will take around 10
minutes.
5.2 | Step 2:
Before moving the oven, leave to cool for 90 minutes.
Timer Dial
a. Turn the left-hand dial clockwise to increase the length of time of the
timer up to 20 minutes.
b. Turn anticlockwise to reduce the amount of time on the timer or rotate to 0
to cancel.
c. Once the timer is complete, a sound will play and the icon will flash.
d. To stop the sound, press the timer dial.
Temperature dial
a. Turn the dial clockwise to increase the Ooni Volt 12 oven temperature.
b. Turn anticlockwise to reduce the Ooni Volt 12 oven temperature.
c. Temperature set to 450°C (Max temp)
d. Current temperature = 300°C during heat up
e. Set temperature achieved at 450°C
We recommend using the Ooni Infrared Thermometer to ensure the Baking Stone is
up to temperature for best results.
Balance Dial Setting
The right-hand dial is the balance dial. This dial shifts power between the
top and the bottom heating elements. You can use it to change the way that
your base or pizza toppings cook.
a. Balance settings on the Ooni Volt 12 are pre-set for each temperature. As
you select your temperature the balance will automatically be set.
b. During the heat-up sequence the balance indicator will turn off.
c. Once your Ooni Volt 12 has reached the selected temperature the balance
“indicator” will turn back on and can be adjusted.
d. Turn the dial clockwise to shift the balance towards the top.
e. Turn the dial anticlockwise to shift the balance towards the bottom.
Check out the Ooni Volt 12 Essentials Guide to view our recommended oven
settings for different pizza styles.
Boost
If the base of your pizza is not cooking in line with the top, Boost can be
used to recharge the stone.
a. Turn the balance dial anticlockwise all the way around.
b. Boost function has started when the icon starts to flash quickly. Boost
will last for 45 seconds.
c. Once Boost has stopped, your balance will return to the temperature
recommended setting. The bottom icon will flash slowly, Boost is not available
during this time.
d. When the icon stops flashing Boost mode is available again.
Mute
To mute or unmute the dial chime, press the timer dial in for three
seconds.
This will not mute the timer or the “temperature reached” sounds.
Troubleshooting
Error Codes – LEDs will Turn Red Depending on Error State
If an error occurs, contact Ooni customer service at
support.ooni.com and quote the error code.
If an error occurs, contact Ooni customer service at
support.ooni.com and quote the error code. Any
other servicing should be performed by an authorized service representative.
a. Error 1:
Cavity Thermal Probe Short
150 temperature dial LED illuminates red.
Alarm tone sounds.
b. Error 2:
Cavity Thermal Probe Open Circuit
200 temperature dial LED illuminates red.
Alarm tone sounds.
c. Error 3:
Oven Over Temperature
250 temperature dial LED illuminates red.
Alarm tone sounds
d. Error 4:
PCB Over Temperature
300 temperature dial LED illuminates red.
Alarm tone sounds.
e. Error 5:
PCB Temperature Sensor Short Circuit
350 temperature dial LED illuminates red.
Alarm tone sounds.
f. Error 6:
PCB Temperature Sensor Open Circuit
400 temperature dial LED illuminates red.
Alarm tone sounds.
g. Error 7:
PCB Communications Fault
450 temperature dial LED illuminates red.
Alarm tone sounds.
Care and Maintenance
Storing
You can use Ooni Volt 12 outside. Store indoors in dry conditions when not in
use.
Only store the baking stone inside the oven — don’t store food or other items
in the oven cavity.
Do not lean on or put items on top of your Ooni Volt 12. Doing so could damage
your oven.
Keep your oven clean while in storage with the Ooni Volt 12 Pizza Oven Cover.
You can order the oven cover at ooni.com.
Baking Stone
- DO NOT use the baking stone over an open flame.
- Avoid extreme temperature change to the stone. DO NOT place frozen foods onto the stone if using temperatures in excess of 200°C.
- The stone is fragile and can break if bumped or dropped.
- The stone is very hot during use and stays hot for a long time after use.
- DO NOT cool the stone with water or use it when damp.
- To clean off burned food marks, wait until the stone is cool, use two hands to carefully take it out of the oven, flip it over and slide it gently back in. The debris on the underside of the stone will burn away the next time you use your Ooni Volt 12.
- If your stone breaks: Turn your oven off, let it cool and unplug it before you remove the broken baking stone. If your Ooni Volt 12 is in warranty, get in touch with our support team to order a replacement. If your Ooni Volt 12 is out of warranty, you can buy a new baking stone at ooni.com.
Glass Door
Wait until Ooni Volt 12 is completely cool before cleaning the glass door. You
can remove grease using dry paper towels or a dry cloth. For more thorough
cleaning, use warm, soapy water, but make sure your Ooni Volt 12 is completely
dry before switching it on again.
Oven Interior and Exterior
Your Ooni Volt 12 should not require any interior cleaning. Any food residue
should burn off when in use. You can use a wire brush to sweep away excess
debris on the stone.
Over time the interior of the Ooni Volt 12 may discolor slightly. This is
completely normal.
Don’t use oven cleaners or metal scourers to clean your pizza oven because
they will damage the Ooni Volt 12.
To clean the outside of your pizza oven, wait until it’s cool, unplug it and
use a lightly damp cloth to wipe the oven body. Dry with a clean towel right
away.
Product Technical Information
Product Label
| Ooni Volt 12
Pizza Oven
SKU: UU-P12400
220-240V~ 1600W IPX4
Serial Number:| Ooni Limited, Unit 5 Bishopsgate Business Park, 189 West
Main Street Broxburn, Scotland, EH52 5LH United Kingdom
Ooni GmbH, Simrockstraße 11, 53113 Bonn, Germany
Ooni, Inc. 2140 South Dupont Highway, Camden, Kent, 19934 DE, USA
---|---|---
Production code:| PA-A000A5
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.
Imported in to the UK by:
Ooni HQ, Bishopsgate Business Park,
189 West Main Street, Broxburn, EH52 5LH, UK
ooni.com
© 2022 Ooni
Ooni is a registered trademark of Ooni Ltd.
All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>