XOU24BWDDGO Panel Ready French Door Combo

When buying any XO appliance, you can be con you have c hosen a high quality, innovative and stylish product  from a company that cares about you!
If you require service or have questions,  there ar e 2 ways to contact our ventilation experts;
Online @ https://xoappliance.com/priority-service-for-your-xo-product/ Or by phone 973-403-8900

CONGRATULATIONS
on purchasing your XO. Before you proceed, take just a moment to register your XO at: www.xoappliance.com/register-your-product/

Or simply scan here to be taken to the registration page…

REGISTRATION HELPS YOU BY –
Ensuring warranty coverage should you need service Providing ownership veri cation for insurance purposes XO can notify you in the event of product changes or recalls.

DEAR INSTALLER THE JOB ISNT DONE UNTILL
To ensure that the installation process is successfully completed, here are few things to review…

• Is the unit plugged in?
• Are the controls on? (Panel will illuminate.)
• Are the controls operating correctly?
• Has the unit been properly leveled – both side to side and front to back – with all 4 leveling feet securely making contact with the floor?
•  If it is an OVERLAY unit – have the panels been securely attached and properly aligned?
•  After installation, does the door open sufficiently to fully extend the shelves?
• Is the door sealing properly?
• Is the handle secure?
• Have you thoroughly inspected the stainless steel surfaces for any imperfections?
• Have you reviewed this manual with the customer and explained the unit’s operation and care?
• Has the customer received copies of the literature and keys?
• Have you properly disposed of all packing materials properly (recycle, please)?
• Is the customer satisfied?

DANGER
RISK OF CHILD ENTRAPMENT!
An empty refrigerator is a very dangerous attraction to children. Remove door gaskets, latches, lids, lock and/or doors from unused or discarded appliances, or take other actions to guarantee them harmless. Always dispose of old appliances in accordance with local laws and regulations. these are the model covered in this book
BEVERAGE CENTER | WINE COOLER COMBO XOU24BWDDGO

YOUR SAFTEY MATTERS

Please read through completely before using your XO Unit
To prevent damage to the door gasket, the door must be opened all the way before pulling shelves out. The appliance must be positioned so that the plug is accessible.  Empty your XO unit before attempting to move the appliance. Moving while loaded may damage or distort the frame. The compressor will get HOT during operation / touching it may cause injury. During installation follow all safety tips provided in this manual / appropriate safety equipment such as safety glasses and work gloves should be worn. Two people should move or lift your XO unit to prevent injury or damage.  Remove all interior and exterior packing materials prior to installation and dispose of properly. Never cover the bottle racks with foil or other material which will impede internal air circulation. For maximum efficiency, keep the door tightly shut unless loading or unloading and never overload your XO unit. Before installing, allow your XO unit to sit upright for 2 hours at the install site. This will allow the cooling system to stabilize after transportation.  Failure to follow this step may cause problems. Never store perishable food products such as meat or cheese in your wine cooler or beverage center.
Location
Your XO unit should be located away from direct sunlight and heat sources (stove, heaters, etc.) which may increase electrical consumption.  High or low ambient temperature may cause units to work improperly. The floor must be strong enough to support your XO unit fully loaded. Your XO unit must not be installed in areas of where water or excessive moisture are present. Your XO unit must not be installed near where flammable, corrosive or hazardous materials are present. Your XO unit’s final installation must observe the correct minimum air clearances around and behind the unit to ensure adequate ventilation.  In addition, all ventilation openings must be kept clear and free of obstructions, failure to do so will result in damage to the unit.
WARNING

• NEVER use external heat sources to accelerate defrosting
• NEVER permit unauthorized service or modifications to your XO unit
• NEVER tamper with the sealed refrigerant system – this unit uses R600A Refrigerant which is flammable. It should never be used in the vicinity of any flammable or explosive ignition sources.
• AL WAYS FOLLOW THE ELECTRICAL SAFETY INSTRUCTIONS OUTLINED IN THIS MANUAL.

Failure To Follow All Electrical Safety Measures May Result in Serious Injury, Fire Or Death
All electrical work should only be performed by an experienced, licensed electrician. All XO units MUST be grounded for safe operation and come equipped with a 3 Prong molded cord/plug for that purpose. NEVER remove or disable the 3rd prong with an adapter. NEVER use an extension cord to operate your XO unit. Your XO unit is built to operate on 115V 60Hz and should be plugged directly into a dedicated 15 amp 3 prong outlet. If you are uncertain as to the voltage, amperage capacity or if the 3rd prong is properly grounded – consult a licensed electrician. To maximize the depth of the installation recess – your outlet should be mounted flush with the wall.
Your XO unit should not share the circuit with any other electrical devices as this may cause overloading, overheating, blown fuses or tripping circuit breakers. In a worst case this can pose a fire hazard. NEVER handle your XO unit in wet conditions as this can pose a severe danger of electric shock. Exercise care when moving your XO unit to avoid damage to the electrical cord. If the electrical cord of your XO unit becomes worn or damaged it must be replaced immediately by a qualified technician. NEVER unplug your unit by pulling on the cord. Unplug by gripping the plug firmly and pull out straight from the outlet.
INDOOR USE ONLY:
XO Refrigerators, wine cellars and beverage centers described in this manual are rated for indoor use only. Your XO Unit was designed to operate in a room temperature ambient condition between o60 F and 90 F.o Use in any area which is not temperature controlled within that range, such as a garage or porch may cause your XO unit to fail to function properly. Use in any uncontrolled area or otherwise exposed to the elements is hazardous and voids the warranty. For outdoor installations – consult XO or your local XO dealer regarding an outdoor rated model. In regions where high humidity exists condensation may appear on the glass and/or gasket seals. For best operation, keeping the unit fully stocked with product will reduce this.
SERVICE 115V – 60 Hz – 1 phase
AMPS 15 Amp Circuit Breaker
Requires a Dedicated Outlet
GFI required for Outdoor Installations All electrical work must be performed by a licensed electrician
State of Calfornia Proposition 65 Warning (US only)
WARNING
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Serious injury, fire or death… Okay –

Installation Instructions

Sizes and Installation Dimensions

USE FREE STANDING  OR INSTALL UNDER COUTER

THE DOOR STOP IS SET AT 110 – BUT CAN BE REST TO 90 OR 140 IF NEEDED. IF THE DOOR CAN’T OPEN FULLY – YOU CAN’T PULL THE SHELVES OUT.

your xo is this big (or small, as the case would be )
height & width

depth
MODELS WITH OVERLAY DOORS
CUSTOM OVERLAY PANELS MAY ADD UP TO 3/4” IN OVERALL DEPTH YOUR CHOICE OF CABINET HANDLES WILL ALSO ADD DEPTH

Integrated Panel Dimensions

AFTER INSTALLTION UNDER COUNTER, OVERLAY DOOR MUST BE ABLE TO OPEN 90 .
PANEL MAXIMUM WEIGHT: 10 lbs.
MAXIMUM PANEL THICKNESS 3/4”

• FOR CABINET DOORS LONGER THAN 30” – CONSULT XO.

  1. Remove the door by unscrewing the Dotom ninge and lowering the door oir the top pin.

  2. Remove the rubber door gasket by pulling it gently out of the slot that holds it in place taking care not to damage it. You will have to replace it later. This will expose the (8) screw attachment holes.

  3. Before the frame has been mounted to the door; attach your handle hardware, at the height of your choosing, drill counter sunk screw holes to align with your handle to help ensure the panel lies flat.

  4. Secure the Overlay panel In place wit Clamps – Use a sort non-slips pad Between the Jaws or the clamp and the door and panel to prevent damage during clamping – DO NOT OVER TIGHTEN.

  5. Strong tape may also be used to help prevent movement of the panel during installation but be careful to ensure it will not damage the finish when removed test a small inconspicuous area first.

  6. In door frame as a template, using the ST4-30 self-tapping screws provided and a phillips head screwdriver, install one screw into each of the ten holes and hand tighten flush with the frame.
     DO NOT OVER TIGHTEN AS SCREWS MAY STRIP OUT.

  7. Drill the handle attachment holes for the fasteners through the frame (from step 3).

  8. Remove the clamps (and/or tape)

  9. Attach your handle using flat head or truss head bolts.

  10. Re-install the rubber gasket by pressing it into the slot making sure it is evenly seated and flat.

  11. Reassemble the door back onto the hinges
      The door hinge stop is set at 110 . While the door is off, you can change it to either 90 or 140 .
      Simply change the position of the stop screw in the lower hinge plate as shown.If the door requires adjustment, the top and bottom hinge each have adjustment screws.
      Loosen the screws, then with the door open, raise the handle side to level and re-tighten the screws.
      

Leveling Your XO

DO NOT NEGLECT THIS IMPORTANT STEP
Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs are seated firmly on the floor and the interior floor of the unit is level both front to back and side to side.
Failure to follow this important step may cause problems with proper door operation, excessive condensation, vibration and noise.

Operating Instructions

INDIVIDUAL CONTROL PANELS

Setting the Temperature

Your Combo Beverage Center |Wine Cooler has two identical control panels.
Single Zone Wine Cooler Temp. Settings Factory Preset: 54 F (Ideal Storage)o Adjustable Range: 41 F to 64 Foo
Beverage Center Temp. Settings Factory Preset: 43 Fo Adjustable Range: 34 F to 50 Foo
Your Combo Beverage Center |Wine Cooler remembers your temperature setting in case of a power failure and automatically adjusts to the previous setting when power is restored.
When the +/- button is pressed, your wine cellar automatically enters set up mode.
The LED Display will begin flashing and display the temperature setting.
Each time you press the + button, the temperature setting will increase 1 Degree.
Each time you press the – button, the temperature setting will decrease 1 Degree.
Once you have reached the desired temperature setting, the display will continue to flash for 5 seconds, then revert to showing the compartment temperature.
To view the real time temperature, press and hold the +/- button for 5 seconds. The interior temperature will flash in the LED Display for 5 seconds.
If you wish to change the display from Fahrenheit to Celsius (or vice versa) press and hold both “+” and “-” simultaneously for 5 seconds.

Functions

led lights

• L1: When you turn on your combo unit, the internal light will switch on when the door is opened, and off when the door is closed.
• L2: Press , the internal light will remain on continuously and dim after 3 minutes.
• L3: Press twice, the internal light will remain on for 10 minutes and then shut off.

colors!

• When you turn your combo unit on, the interior light is white, press and the light will change to blue.
• Press again and the light will change to amber.

Switching Modes

• When you turn your XO Unit on, it is set to work in standard mode.
• Press ECO mode is turned on. ECO Mode is an energy saver function.
• Press again, ECO mode is turned off and it returns to standard mode.

ECO Mode also serves as SABBATH Mode.
The Sabbath Mode was designed for use on the Jewish Sabbath and Holidays.
The Sabbath Mode feature makes it possible for observant Jews to use the beverage center during the duration of the holiday. The Sabbath Mode feature can be set to override typical reactions caused by your interaction with the unit. While in the Sabbath Mode, your appliance will still operate. However, it will not respond to your actions.
While in the Sabbath Mode, you may notice the fan running when the door is opened, however, this is not a result of your actions. The compressor and fan will operate at predetermined times.
Press for 5 seconds, DEMO mode is turned on.
Press for 5 seconds again, DEMO mode is turned off and it returns to standard mode.
Your controls are simple and intuitive to operate.

Wine and Beverage Storage

single zone control
The beverage center temperature can be adjusted from 34-50°F.
The wine cooler temperature can be adjusted from 41-64°F.

how many…
The capacity of your Beverage Center Side is:

• Top Shelf    20 Cans (double stacked)
• Lower Shelf   10 Cans
• Bottom  19 Cans
• TOTAL  49 Cans (12 oz size)

The capacity of your Wine Cooler Side is:

• per Rack      3 Bordeaux Bottles (750ml)

• of Racks   x 6 Racks

• Bottom        3 Bordeaux Bottles (750ml)
• TOTAL      21 Bordeaux Bottles (750ml)

Store wine in sealed bottles only
Avoid overloading
Storing little or no product can cause excessive condensation

Care and Cleaning

juggling space

• STEP 1: Remove the shelf
  

• STEP 3: Reverse the steps.
  Install the right and left SHELF GLIDES in their new position by pushing the pins into the slots and click the front of the glide down to secure.
  Replace the shelf.

ALL SHELVES MUST BE PUSHED ALL THE WAY IN BEFORE CLOSING THE DOOR DOOR MUST BE FULLY OPENED BEFORE PULLING SHELVES OUT
Easy to change + more shelf positions give you more storage options with XO.
Cleaning the Inside:
Walls, floor, inside window, and shelves – Some water deposits and dust can be removed with a dry paper towel, others may require a damp cloth.
Cleaning the Outside:
Outer case – It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.
Control Panel and Door – Wipe with a damp cloth and dry thoroughly. Do not use cleaning sprays, large amounts of soap and water, abrasive, or sharp objects on the panel, they can damage it.
CAUTION: Some paper towels may also scratch the control panel and glass on the door.
Door Surface – Use only mild, non-abrasive detergents applied with a clean sponge or soft cloth.
Rinse well with damp cloth.
NOTE: Do not use cleaners containing ammonia or alcohol on your XO unit. Ammonia or alcohol can damage the appearance of the appliance.
NOTE: Never use any commercial/abrasive cleaners or sharp objects on any part of the wine cooler.
power failure

Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened.
If the power is off for a longer period of time, you need to take the proper steps to protect your contents.
vacation
Short vacations: Leave the XO unit operating during vacations of less than three (3) weeks.
Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the appliance.
Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.
ENERGY SAVING TIP
The unit should be located in the coolest area of the room, away from heat producing appliances, and out of direct sunlight.
moving
Remove all items and securely tape down all loose items (shelves) inside your appliance Turn the adjustable leveling legs all the way into the base to avoid damage
Tape the door shut and transport the XO unit securely in the upright position
Blanket wrap the exterior to help protect against scratches and other damage
For best results change every 3 to 6 months

• Rotate the filter 1/4 turn to unlock

• Pull straight out to remove
  Align the tabs and insert the new filter

• Rotate filter 1/4 turn to lock in place

FAQ’s

Q: There doesn’t appear to be any power to the unit.
A: There are 3 easy to check common causes:

• Check to see if a fuse has blown or circuit breaker has tripped & replace or reset.
• Check to ensure the plug is fully inserted into the outlet.
• A power surge may have caused the unit to shut down to protect itself – Unplug the unit, wait 5 seconds and plug it back in.

Q: The cabinet temperature is too high.
A: Check these 5 things:

• Check the temperature setting and adjust as needed.
• Make certain the door is completely closed and the door gasket is sealing properly.
• Avoid opening the door frequently and/or leaving the door open for extended periods.
• Did you load a large quantity of warm bottles at once? It is better to add smaller quantities in several loads.
• Make certain nothing is blocking the toe kick vents (including dust behind the vents).

Q: The alarm is beeping and “HI” is displayed on the control panel.
A: See the question and answers above – if the door has been tightly closed and you have not recently added a large quantity of warm bottles, it may be a mechanical issue. Unplug the unit and call for service.
Q: The alarm is beeping and “LO” is displayed on the control panel.
A: This may be a sensor malfunction. Unplug the unit and call for service.
more “q & a”
Q: Why does condensation form on the inside or outside of my XO unit?
A: It may be that the door is either opened repeatedly or not closed completely. It may also be due to an excessive ambient humidity, in which case it will clear when the humidity drops.
Q: There is warm air coming from the bottom of my unit.
A: This is normal. Cooling systems must vent the heat they remove from inside the cabinet.
Q: Why does the evaporator fan run all the time?
A: It continually recirculates air to ensure cabinet temperatures are consistent.
Q: How do I adjust temperature?
A: Refer to Page s 7 & 10.
Q: How do I adjust shelf height?
A: Refer to Page 12.
Q: When does the high temperature alarm sound?
A: If internal temperature exceeds 70° F for more than 60 minutes.
Q: If the door hinge is next to a wall, how much clearance do I need to open the door?
A: The unit should be at least 2” from the wall to allow the door to open at least 90 °.

WARRANTY

90 DAY LOVE IT or LEAVE IT. For 90 Days all our products are backed by our unique Love it or Leave it Guarantee.
TWO-YEAR PARTS & LABOR LIMITED WARRANTY. XO warrants to the original purchaser of every new XO refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit. XO’s obligation under this warranty is limited to a period of two (2) years from the date of original purchase.
FIVE-YEAR COMPRESSOR LIMITED WARRANTY. XO warrants its compressor to be free from defects in both material and workmanship under normal and proper use and maintenance service for a period of five (5) years from the date of original purchase. If the compressor fails during that time period due to a defect in material or workmanship, XO will supply a replacement compressor free of charge. The consumer will be responsible for all related transporation and labor costs. Product must be registered with XO to qualify for this warranty. TERMS APPLICABLE TO EACH WARRANTY. Any part covered under the above warranties that is determined by XO to have been defective within the time frame is limited to the repair or replacement, including labor charges, of defective parts or assemblies. The labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined by XO.
WARRANTY CLAIMS. All claims for labor or parts must be made directly through XO. All claims should include: model number and serial number of cabinet, proof of purchase, and date of installation. In case of warranted compressor, the compressor model tag must be returned to XO along with the above listed information.
WHAT IS NOT COVERED BY THIS WARRANTY. XO’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty. Open box, factory seconds, scratch and dent, floor models and commercial applications are excluded from these warranties. Consumer shall be responsible for labor and transportation costs where noted above.
NO CONSEQUENTIAL DAMAGES. XO is not responsible for economic loss, profit loss; or special, indirect or consequential damages, including without limitation, losses or damages arising from food or product spoilage claims whether or not on account or refrigeration failure.
WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user at the original installation location. Any such assignment or transfer shall void the warranties herein made and shall void all warranties,
express or implied, including any warranty or merchantability or fitness for a particular purpose.
IMPROPER USAGE. XO assumes no liability for parts or labor coverage for component failure or other damages resulting from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided with the unit. ALTERATION OR NEGLECT. XO is not responsible for the repair or replacement of any parts that XO determines have been
subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.
IMPROPER ELECTRICAL CONNECTIONS. XO is not responsible for the repair or replacement of failed or damaged components resulting from electrical power failure, high or low voltage, use of extension cords, or improper grounding of the unit.
YOUR RIGHTS UNDER STATE LAW. This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you.
OUTSIDE U.S. This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside the 48 continental United States.
To obtain service:
Call 973-403-8900 |email service@xoappliance.com | or submit a request on our website www.xoappliance.com

References

• XO Appliance | The Next Level in Luxury Appliances
• Product Registration | XO Appliance
• Priority Service for your XO Product | XO Appliance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>