Elipta EG1923R Stem LED Path Light Installation Guide
- June 9, 2024
- ELIPTA
Table of Contents
Elipta EG1923R Stem LED Path Light
Installation notes
Ensure mains supply is isolated prior to installation of this product.
Unscrew the top and insert lamp. Apply small amount of grease to the thread
and secure top to the body of the fitting.
Refer to the instruction manual for further guidance.
Note – This product must be installed by a qualified electrician.
Specifications
| Part code | EG1923R |
|---|---|
| Diffuser | Clear |
| Dimensions (mm) | 380×25 |
| Cable length (mm) | 1500 |
| Construction | Solid Brass |
| Finish | Bronze |
| Class | Class III |
| IP rating | IP65 |
| Maximum wattage | 3W |
| Lamp base | G4 |
| Lamp included | No |
| Dimmable | Dependant on lamp |
| Input voltage | 12V DC |
| Net weight (Kg) | 497 |
| Gross weight (Kg) | 617 |
| Warranty | 2 Years |
| Manufactured in accordance with | BS EN 60598 |
| Origin of manufacture | PRC |
DIMENSIONS
3 YEAR WARRANTY
Exclusions: Damage by machinery, animals or the use of incorrect cleaning materials. Corrosion due to exposure to salt or chlorine. Damage due to incorrect installation practices. Responsibility for 3rd party cost; indirect or consequential loss.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>