em-trak B900 Series Rib Class B AIS Transceiver Installation Guide
- June 9, 2024
- em-trak
Table of Contents
em-trak B900 Series Rib Class B AIS Transceiver
INTRODUCTION
This is a general guide to show you how simple it is to install an em-trak AIS transceiver. If you have any questions at any time you can contact our team support@em-trak.com.
- AIS starts up automatically every time engine starts.
- Wireless connection to your phone and any other display device such as chart plotter.
- See all AIS targets and vessel info.
HOW TO USE
- No screws required! Use bracket to fit AIS into convenient storage/utility area.
- Connect to your VHF radio, VHF antenna and power. AIS has internal GPS so if you install near a window, under a fibreglass deck or inside a centre console you will not need an external GPS antenna.
- Switch power on and use CONNECT-AIS app or PROAIS2 PC Software to program AIS with your vessel information.
- See AIS targets and information on your chartplotter, smart phone and other wireless devices.
CONNECT-AIS
Documents / Resources
| em-
trak B900 Series Rib Class B AIS
Transceiver
[pdf] Installation Guide
B900 Series Rib Class B AIS Transceiver, B900 Series, Rib Class B AIS
Transceiver, Class B AIS Transceiver, B AIS Transceiver, AIS Transceiver,
Transceiver
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>