em-trak B921 Tender Class B AIS Transceiver Installation Guide
- June 9, 2024
- em-trak
Table of Contents
em-trak B921 Tender Class B AIS Transceiver
INSTRUCTION
This is a general guide to show you how simple it is to install an em-trak AIS transceiver. If you have any questions at any time you can contact our team support@em-trak.com
- AIS starts up automatically every time engine starts.
- Wireless connection to your phone and any other display device such as chart plotter.
- See all AIS targets and vessel info.
-
No screws required!
Use bracket to fit AIS into convenient storage / utility area. -
Connect to your VHF radio, VHF antenna and power.
AIS has internal GPS so if you install near a window, under a fibreglass deck or inside a centre console you will not need anexternal GPS antenna. -
Switch power on and use CONNECT-AIS app or PROAIS2
PC Software to program AIS with your vessel information. -
See AIS targets and information on your chartplotter, smart phone and other wireless devices
CONNECT-AIS
© 2020 em-trak Marine Electronics Limited
Read User Manual Online (PDF format)
Loading......