Alpenfoehn Ben Nevis Advanced Black RGB CPU Cooler Installation Guide

Alpenfoehn Ben Nevis Advanced Black RGB CPU Cooler Installation Guide

Caution:

1. All specifications subject to change without notice.
2. Under no condition shall Alpen fohn be liable for any indirect, incidental or consequential damages arising from any defect or error in this manual or product.
3. Please ask for professional help if you are not sure of safe installation.
4. Please read the safety instructions on our website before you install the product: info.ekl.eu

Accessories

1. 1 x Cooler
   

2. 1 x AMD Clip
   

3. 2 x Intel LGA 115X/1200 Clip 2 x Intel LGA 115X/1200
   

4. 2 x Intel LGA201
   

5. 4 x Screw

6. 1 x Intel LGA 115X/1200 Backplate
   

7. 1 x Thermal Grease

ADM LAG AM5

Step 1

Attach the AMD metal clips onto heatsink base using the screws.

Attention: AMD Clip already mounted on the heatsink

Step 2

Evenly apply a thin layer of thermal grease onto the processor.

Step 3

Evenly apply a thin layer of thermal grease onto the processor.

Step 4

Finish the installation by connecting the fan cable to the motherboard.

Intel lag 2066

Step 1

Attach Intel LGA 2011 brackets onto heatsink base using the screws.

Step 2

Evenly apply a thin layer of thermal grease onto the processor.

Step 3

Put the cooler on the processor, check your socket type and ensure all screws through the motherboard mounting holes. Position the clip as shown in the picture and then push down to secure the cooler.

Step 4

Finish the installation by connecting the fan cable to the motherboard.

RAG Lighting Connection

CAUTION

Wrong connection will damage the device and cause mal-function!

Use Motherboard RGB Control Benut zung der Mainboard RGB Farbs teuerung

Connect the RGB split cable to the motherboard. The pin with arrow has to connect to the 12V pin on motherboard.

Connect the RGB header of the fan with the RGB split cable. Now you can use a simultaneous color management of the mainboard. Further the RGB split cable offers the ability to connect another 3 devices like e.g. RGB fans.

Use internal RGB Controller

Press this button to switch the fan into dynamic mode. Every press will enable the fan into a Blinking mode: 7-color in turn -> different single colors Breathing mode: 7-color in turn -> 7-color in turn -> RGB in turn -> 7-color in turn -> different single colors

Press this button, the lighting will be static and fixed to one color. There are many different colors for choice including green, blue, red, purple, white…

1. When the fan is running in dynamic mode, this button will cange the color changing speed.
2. When the fan is runnin in static mode, this button will control the brightness of the light.
3. Long press this button to turn off the LED lighting and short press to turn on the lighting.

Intel lga 115x/1200

Step 1

Attach Intel LGA 115X/1200 clip onto heatsink base using the screws.

Step 2

Will provide the backplate installed to the motherboard on the back of the upper part, placed correctly on the motherboard back.

Step 3

Finish the installation by connecting the fan cable to the motherboard.

Step 4

Put the cooler on the processor, check your socket type and ensure all screws through the motherboard mounting holes. Position the clip as shown in the picture and then push down to secure the cooler.

Step 5

Finish the installation by connecting the fan cable to the motherboard.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>