Qi NSC3 Station C Modern Wireless Charger User Guide
- June 9, 2024
- Qi
Table of Contents
Qi NSC3 Station C Modern Wireless Charger
Interface & Ports
- Qi Charging Indicator
- USB-A CHARGING PORT (1A)
- USB Type-C CHARGING PORT (2.4A)
- Qi charging area
- Power Cord
Specifications
- Power ………………………………………………………………………………………………….. DC 9V 3A Adapter
- AC Power Supply ………………………………………………………………………… 100-240V – 50/60Hz 0.BA
- Qi Charging Pad ………………………………………………………………………………………………………… 10W
- USB-A Charging Port ……………………………………………………………………………………………………. 1 A
- USB Type-C Charging Port ………………………………………………………………………………………… 2.4A
Installation
Connect the power supply into a wall outlet (110V AC). If desired, place the security clamp over the power cable and affix to furniture or wall.
CHARGING
Qi wireless charging
Place your wireless device on top of Station C. Charging will begin on
contact. When wirelessly charging, the LED indicator is continuously solid
green.
- NOTE: Works with all Qi-certified compatible devices including iPhone 8, iPhone X and all newer iPhone models and many Android Phones.
- NOTE: Provides 1 OW of charging power for faster Qi wireless charging.
- NOTE: Station C has a protective circuit that detects when foreign objects or devices that are Qi-certified are placed on the charging and will disable power to the charger as a safety precaution. When triggered the LED indicator will light red.
USB Charging
Station C features two USB charging ports located on the front of the
device. The USB-A port on the left indicated provides 1A of power to charge
phones and other devices. The USB Type-C port on the right provides 2.4A of
power to charge phones and other devices.
SAFETY PRECAUTIONS
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or ground-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.
- a. Do not expose this unit or the AC/DC adaptor to dripping or splashing water. Keep liquid-filled objects, such as vases, away from this unit and AC/DC adaptor.
- b. To ensure that this unit is completely disconnected, unplug it from the wall.
- c. Ensure that the AC/DC adaptor is easily accessible.
- d. Please note the information printed underneath the unit.
- e. Do not impede the ventilation of this unit by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
- f. Keep open flames, such as lighted candles, away from this unit.
- g. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation.
- h. The socket outlet shall be installed near the equipment and shall be easily accessible.
FCC
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body
Supplier’s Declaration of Conformity
Product Name: Station C
Model number: NSC3
Responsible party:
Nonstop, Inc.
10624 S.Eastern Ave, Suite A-979,
Henderson, NV 89057, United States
+ 1 775-398-3038
[email protected]
Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION: The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.