ALPINE HDZ-65C Status Hi-Res Series Speakers Owner’s Manual

June 4, 2024
Alpine

ALPINE HDZ-65C Status Hi-Res Series Speakers

ALPINE-HDZ-65C Status-Hi-Res-Series-Speakers

CONTENTS

ALPINE-HDZ-65C Status-Hi-Res-Series-
Speakers-1

EXTERNAL DIMENSIONS

ALPINE-HDZ-65C Status-Hi-Res-Series-
Speakers-2 ALPINE-HDZ-65C Status-Hi-Res-Series-
Speakers-3

WIRING CONNECTION

ALPINE-HDZ-65C Status-Hi-Res-Series-
Speakers-4

INSTALLATION

ALPINE-HDZ-65C Status-Hi-Res-Series-
Speakers-5 ALPINE-HDZ-65C Status-Hi-Res-Series-
Speakers-6

SPECIFICATIONS

  HDZ-653 HDZ-65C
Units Type Woofer 6-1/2”(16.5 cm) Carbon Cone
Midrange Speaker 3-1/2”(8.9 cm) Carbon Cone
Tweeter 1-1/4”(3.2 cm) Carbon Cone 1-1/4”(3.2 cm) Carbon Cone
Maximum Peak Power 300 Watts in system 300 Watts in system
Maximum RMS Power 100 Watts in system 100 Watts in system
Impedance 4 ohms 4 ohms
Sensitivity 88 dB SPL (2.83 V @ 1 m) 88 dB SPL (2.83 V @ 1 m)
Frequency Response 55 Hz to 40 kHz 55 Hz to 40 kHz
Mounting Deps/Drop-in Mounting Woofer 2-3/4” (6.7 cm)
Midrange Speaker 1-9/16” (3.9 cm)
Cutout Diameter Woofer 5-5/8” (14.2 cm)
Midrange Speaker 3-1/8” (7.9 cm)
Recommended Amplification Up to 100 watts RMS. per channel Up to 100 watts

RMS. per channel

NOTE: Design and specifications are subject to change without notice.

Warning

  1. RMS Power / Peak power specified on this product is the value in 3way (HDZ-653) / 2way (HDZ-65C) system connected to passive network included in this package.
    Using each speaker connected directly to amplifier without using designated network will void your warranty.

  2. This product contains a high-performance tweeter.
    If there is a tweeter already installed in your car, you must disconnect its terminal.
    If you leave the original tweeter connected and connect this product in parallel, fault may occur in this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals