TECKNET M009 High Performance Wired Gaming Mouse User Manual
- June 9, 2024
- TECKNET
Table of Contents
M009 High Performance Wired Gaming Mouse
User Manual
Gaming Mouse
Model: M009
User Manual
Package Contents:
Package Contents:
Button Instructions:
1. Right Click Button
2. Scroll Wheel
3. Left Click Button
4. M1 Button
5. M2 Button
6. M3 Button| 7. M4 Button
8. M5 Button
9. DPI +Button
10. DPI — Button
11. Weight Tuning Set
---|---
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Technical Specifications:
Button Count: 10 Buttons
Resolution: 500/1000/2000/4000DPI (250-16400 by software)
Interface: USB version 2.0
Operating Voltage: 4.75V
Operating Current: <120mA
Cable Length: 1.8m
LED Color: Red, Blue, Green, Cyan, Yellow, Pink
LED Brightness: 5 levels adjustable
LED Breath Time: 4-8s adjustable intervals
Macro Settings: 12 macro settings and up to 32 buttons for each one
Support: 6 profile settings
System Requirements:
To use this mouse, your computer must meet the following hardware requirements
and run one of the operating systems listed below.
Hardware:
- PC with a Pentium processor or equivalent AMD processors
- USB 2.0
Operation System:
Windows 98/ME/2000/XP/VISTA/Windows7/Windows8/WIN10 Note: The scroll wheel
only works under the operating systems listed above. If you use the mouse
under a different operating system, the mouse may either not work or lose its
enhanced features.
DPI Switch:
The mouse supports 500/1000/2000/4000DPI. To switch to either setting, press
the DPI button. The default setting is 1000 DPI. Click the “DPI +” button on
the top of the mouse once to upgrade the DPI, LED indicator would jump to
next level. Click the “DPI -” button on the top of the mouse once to downgrade
the DPI, LED indicator would drop to previous level.
Software Instructions:
Installation:
-
Connect to your PC, insert the disc and double click the
software icon, select a language. -
Press “Next Step”.
-
Select “Run TechNet M009 Driver”.
-
Double click the software icon after installation is completed.
Button Setting:
Except Left Button must be selected as “Click”, Right Button, Scroll Wheel,
Left Title Scroll, Right Title Scroll, DPI+, DPI-, M1, M2, M3, M4, M5 would be
defined as: Click, Menu, Universal Scroll, IE Forward, IE Backward, Double
Click, CPI Cycle, Multimedia, Hot Key, Windows, Single Key, Combo Key, Macro
Key, Button Off, Left Title Scroll, Right Title Scroll.
Parameter Setting:
1) DPI Setting
There are 4 levels DPI setting, default DPI is 1000, you can adjust the DPI
within 250-16400 for each level. After finish the adjustment, click “Save” to
save the setting.
2) Lighting Setting
You can define the Standard, Respiration, and Neon if needed.
3) USB Report Rate
You can define the Report Rate within125Hz-1000Hz.
4) Mouse Speed
There are 11 levels speed for user setting.
5) Double Click Speed
There are 11 levels speed for user setting.
6) Scroll Speed and Angle Snap
You can define the scroll speed by selecting “The number of rows” (will input
the digit directly) or Scroll one screen. Adjust the bar will change the angle
snap.
Macro Setting:
TechNet M009 software supports 12 macro settings. Each macro supports 32 keys.
Note: 32 keys includes key down, key up action.New Macro setting:
- Click “New” to create a macro, “Macro_0” will appear under “Select Marco”, double click “Macro_0” to change the name. Take “g” for example, input “g” then click “OK” to save it.
- Click “Start Recording” to set up the macro. Input the keys needed and click “Stop Record” to save. Then you can create a new macro or continue to define other settings. You can choose “Record delays between key” and “Loop Times”. Click “OK” to save.
- You can delete macro from the list. Simply select the captioned macro, click “Delete”. Then click “Save” to save the setting.
- After finish macro recording, go to main interface, choose the button needed, click “Macro” and the saved macro would appear. In addition, there are 3 options on the right for user to select. Click “OK” to save and macro for the captioned key is ready for use.
Profile Setting:
TechNet M009 supports up to 6 profile.
- Click “Config” at the down left corner and click “New” to create new profile. “PROFILE_0” will appear under the Configuration.
- Click “PROFILE_O” to rename the profile. A drop-down menu will appear as below when you right click. You can delete, edit, copy, load or save the profile.
- Load the Profile. Select a profile and right click to active the drop down menu, click “Load” then you can choose the saved profile to load in the software.
Uninstallation:
Open the control panel and click “Procedures and Functions”. Select
“TeckNetM009” and double click to uninstall.
Attention:
- Any attempt to disassemble, adjust or repair the mouse may result in exposure and other safety hazards.
- If not used, the mouse will drop into auto-sleeping mode within 3 seconds, press any key or scroll wheel to activate the mouse.
- Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
- The mouse might not work smoothly on some special surfaces, such as smooth, dark or black, reflecting and 3D mouse pads surfaces.
- Please avoid using the mouse on a metal surface. Metals, such as iron, aluminium or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.
Ergonomic Guidelines
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, Shenzhen Unchain Technology Co., Ltd. declares that the radio
equipment type M009 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: http://www.tecknet.co.uk/support
IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.
- SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
- Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Keep the product away from fire or explosion may occur.
- Do not place product in or near inflammable, explosive or hazardous object.
- Do not place in or near water, rain, excess moisture or extreme heat.
- Do not operate product with damaged cord or plug.
- Do not operate product if it has been damaged in any way.
- Do not disassemble the product. Disassembly may result in a risk of safety hazards.
- Do not throw or shake the product.
Limited 12-Month Warranty
What this warranty covers.
Shenzhen Unchain Technology Co., LTD. (Manufacturer: “Unchain”) warrants to
the original purchaser of this TECKNET product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unchain warrants the TECKNET product for 12 Months.
What will we do to correct problems?
Unchain will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided
to Unchain for inspection upon Unihan’s request at the sole expense of the
purchaser, or if Unchain determines that the TECKNET product has been
improperly installed, altered in any way, or tampered with. The TECKNET
Product Warranty does not protect against acts of God such as flood,
earthquake, lightning, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (e.g. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to claim the warranty
Please contact retailers or visit TECKNET website at www.teck-
netonline.com or
support@tecknet.com for more information.
To extend the warranty period, please visit our website and register your
TECKNET products within 90 days of purchase.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.Household
user should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase contact.
This product should not be mixed with other commercial wastes for disposal.
http://www.tecknet.co.uk
Software Download (MODEL: M009)
Enlargement du logical
(MODELE: M009)
Multifunctional, advanced setup, light and macro function can
be set by software. Please download software throng:
http://www.tecknet.co.uk
Manufacturer: Shenzhen Unchain Technology Co.,Ltd
Manufacturer Address: 201, 111-3, Shijiazhuang District, Bantian Community,
Bantian Street, Longing District, Shenzhen, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>