better bathrooms 25896 Wall Hung and Pedestal Basin User Manual
- October 29, 2023
- Better Bathrooms
Table of Contents
better bathrooms 25896 Wall Hung and Pedestal Basin
Wall Hung and Pedestal Basin
- Waste, trap and tap sold separately
Please note: Image is for illustrative purposes only and may differ slightly
to the actual product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures,
fittings and furniture to match. So, you can fall in love with your space
every single day.
As one of the UK’s largest independent bathroom stores, we’ve received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you
experience any problems, please:
- call our friendly UK call centre on 0871 244 0935 (9am-7pm Monday to Friday, or 10am-4pm Saturday and Sunday), or
- send us a message via customerservices@buyitdirect.co.uk
Important information
- Please read these instructions thoroughly and retain for future reference.
- Manufactured to BS EN14688 Sanitary appliances – wash basins.
- Please ensure that the product is checked for damage prior to installation, any damage reported after installation will not be covered.
Tools required
Drill, drill bit, spanner, hammer and silicone
Installation
IMPORTANT! Below is the suggested method of installation to a solid wall,
if the wall type is different you will require a different fixing type
(fixings not supplied)
Please note: Before commencing any installation check for
wires and pipes will not be damaged during drilling
Installing basin to the wall
- Offer the basin to the wall, checking that it is level then drill the wall in the required location. Please note: If you are drilling into a tile, it is recommended to tape the wall in the area to be drilled in order to prevent slipping
- Insert the wall plug into the drilled hole then tap it to the finished wall surface.
- Insert the fixing bar ad tighten into the wall using a spanner or grips.
- Hold the basin over the fixing bar then place the washers over the fixing bar as shown in the installation method diagram at the beginning.
Please note: You will require two people for this section of the installation - Connect the nut and tighten into position using a spanner, do not overtighten.
- Check that the basin is stable then seal along the back edge.
Please note: Allow all sealant to dry for at least 24 hours before use
Installing basin on a pedestal
- Place the pedestal in the required location then place the basin onto the pedestal and align, so it is level and central. Once aligned, mark the drill holes through the holes in the back of the basin then remove and follow the instructions above from 1- 3 (Installing basin to the wall)
- Relocate the pedestal then the basin, so that the basin slots over the fixing bars then follow the instructions above from 4-6 (Installing basin to the wall).
- Once the installation is complete, and the basin is secured, seal the basin and pedestal. Seal between the underside of the basin bowl and the top edge of the pedestal. Seal along the front bottom edge of the pedestal.
Please note: Allow all sealant to dry for at least 24 hours
before use
Cleaning
To maintain the surface finish of your product, wipe clean after every use, using a clean damp cloth, a mild detergent mixture can be used. Do not use abrasive cleaning agents or materials which can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.
Wall Hung with Semi Pedestal Basin
- Waste, trap and tap sold separately
Please note : Image is for illustrative purposes only and may differ
slightly to the actual product
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures,
fittings and furniture to match. So, you can fall in love with your space
every single day.
As one of the UK’s largest independent bathroom stores, we’ve received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you
experience any problems, please:
- call our friendly UK call centre on 03303903062 (9am-7pm Monday to Friday, or 10am-4pm Saturday and Sunday), or
- send us a message via customerservices@buyitdirect.co.uk
Important information
- Please read these instructions thoroughly and retain for future reference.
- Manufactured to BS EN14688 Sanitary appliances – wash basins.
- Please ensure that the product is checked for damage prior to installation, any damage reported after installation will not be covered.
Tools required
Drill, drill bit, spanner, hammer and silicone
Installation
IMPORTANT! Below is the suggested method of installation to a solid wall,
if the wall type is different you will require a different fixing type
(fixings not supplied)
Please note: Before commencing any installation check for
wires and pipes will not be damaged during drilling
Installing basin to the wall
-
Offer the basin to the wall, checking that it is level then drill the wall in the required location. Please note: If you are drilling into a tile, it is recommended to tape the wall in the area to be drilled in order to prevent slipping
-
Insert the wall plug into the drilled hole then tap it to the finished wall surface.
-
Insert the fixing bar ad tighten into the wall using a spanner or grips.
-
Hold the basin over the fixing bar then place the washers over the fixing bar as shown in the installation method diagram at the beginning.
Please note: You will require two people for this section of
the installation -
Connect the nut and tighten into position using a spanner, do not overtighten.
-
Check that the basin is stable then seal along the back edge.
Please note: Allow all sealant to dry for at least 24 hours before use
Installing basin pedestal
Please note: Allow all sealant to dry for at least 24 hours
before use
Cleaning
To maintain the surface finish of your product, wipe clean after every use, using a clean damp cloth, a mild detergent mixture can be used. Do not use abrasive cleaning agents or materials which can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.