E78-900TBL-02 Cdebyte Usb Test Kit User Manual
- June 9, 2024
- ebyte
Table of Contents
E78-900TBL-02 Cdebyte Usb Test Kit User Manual
Chengdu Ebyte Electronic Technology Co.,Ltd.
Disclaimer
The information in this document, including the URL address for reference, is
subject to change without notice.
The document is provided “as is” without any guarantee responsibility,
including any guarantee for marketability, suitability for a specific purpose,
or non-infringement, and any guarantee for any proposal, specification or
sample mentioned elsewhere. This document does not bear any responsibility,
including the responsibility for infringement of any patent rights caused by
the use of the information in this document. This document does not grant any
license for the use of intellectual property rights in estoppel or other ways,
whether express or implied.
The test data obtained in the article are all obtained by the Ebyte laboratory, and the actual results may vary slightly.
We hereby declared that all brand names, trademarks and registered trademarks mentioned in this document are the property of their respective owners.
The final interpretation right belongs to Chengdu Ebyte Electronic Technology Co., Ltd.
Notice :
Due to product version upgrades or other reasons, the contents of this manual
may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to
modify the contents of this manual without any hint or noticet. This manual is
only used as a guide. Chengdu Ebyte Electronic Technology Co., Ltd. makes
every effort to provide accurate information in this manual. However, we does
not guarantee that the contents of the manual are completely free of errors.
All statements, information and suggestions in this manual do not constitute
any express or implied guarantee.
1. Introduction
E78-900TBL-02 is a complete set of test products specially for E78 series SMD SOC modules combined with USB to TTL serial port backplane. All E78-868LN22S (6601) module pins have been drawn out for customer testing and development, which greatly reduces customer testing and development difficulty.
1.1 Size and interface specification
2. Quick start
2.1 Test preparation
2.1.1 Driver Installation
Please go to the official website to download the driver CH341SER.EXE, and
double-click to install. This driver supports 32/64-bit Windows
10/8.1/8/7/VISTA/XP, SERVER2016/2012/2008/2003, 2000/ME/98, certified by
Microsoft digital signature, and supports USB to 3-wire and 9-wire serial
ports etc.
2.1.2 hardware connection
Please prepare the Micro USB cable and antenna, connect them to the
E78-900TBL-02 accordingly, and open the corresponding serial port.
As shown in the figure, plug in the jumper cap and select 3.3V power supply. Both E78-900TBL-02 are configured in this way. Open the corresponding serial port to send and receive data.
(Since the E78 series has no factory firmware, if you want to send and receive data through the serial port, please program it.）
About us
Technical support: support@cdebyte.com
Documents and RF Setting download link:
www.cdebyte.com
Thank you for using Ebyte products! Please contact us with any questions or
suggestions: info@cdebyte.com
Official hotline:028-61399028
Web: www.cdebyte.com
Address: , Building B5, Mould Industrial Park, 199# Xiqu Ave, High-tech Zone,
Chengdu, 611731, Sichuan, China
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co., Ltd.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>