AI VIEW C300-0200 Full HD Dome AI Based Camera Installation Guide
- June 9, 2024
- AI VIEW
Table of Contents
AI VIEW C300-0200 Full HD Dome AI-Based Camera
PRODUCT KIT
TECHNICAL SPECIFICATION
Power supply
- C300-0200: DC 12V/1A – Maximum 5.4W
- C310-0200: DC 12V/1A – Maximum 5.2W
- Protection standards: IP66
- Resolution, frame rate: H.264/H.265
- FHD 1920×1080, 30 fps
- Digital Zoom: 8x
- Focal length: 4 mm
- The angle of view: 87.5° (H) – 104.9° (D) – 44.4° (V)
- Operating temperature
- Temperature: -10°C ~ 60°C (14°F – 140°F)
- Humidity: 10% ~ 100%
- Dimensions (L x W x H) L93.1 x W93.1 x H68 mm
- Weight 0.36 Kg
PRODUCT OVERVIEW
INSTALLATION GUIDE
- Step 1: Apply decal on the area where the camera needs to be installed and fix the plastic anchors. Tighten the screws to fix the camera (figure 1).
- Step 2: Insert the camera body on the camera mount and fix the camera with the protector by rotating clockwise (figure 2).
INSTALLATION FOR SIGNAL CONNECTION
- How to connect devices: Model C300-0200/C310-0200: Use 12VDC and the network cable connected from the switch.
ADJUSTING THE CAMERA VIEWING ANGLE
PASSWORD SETTING
- The IP address of camera is set to DHCP mode by default. For the camera enables the DHCP by default, you need to use the AI View Scanner App to scan IP.
- Note: To complete the installation steps for the camera, refer to the User Manual.
- The system will ask you to reset the password on your initial access.
- When the “Administrator password change” window appears, enter a new password.
- For passwords using eight or nine characters, you need to use at least three of the following types of characters: uppercase and lowercase letters, numbers, and special characters.
- For passwords using 10 to 15 characters, you need to use at least two of the character types. Special characters include: ~ ` ! @ # $ % ^ & * ( ) _ – = + | { } [ ] . ? /
Note:
- For additional security, please do not repeat any characters in your password.
- If you forget your password, you can hold the [RESET] button in 10 seconds to return the product to its factory settings.
SOFTWARE INSTALLATION
Login screen
- When accessing the camera, a login window will appear. Enter your username and password to access the camera.
- Enter “admin” in the
box. - Enter your chosen password in the
box. - Click
SAFETY INFORMATION
Be sure to follow this advice to ensure the device works properly.
Precautions
- Installation instruction: Concrete, brick, column, wood… are all suitable. Make sure the wall is strong enough. The torque forces of screws securing IP enclosure: 1.3 – 1.4Nm.
- It is recommended to use shielded network cables (STP) during set-up.
- It is recommended to use CAT5e or higher network cables.
- Store the camera in a cool and dry environment.
- Shield the camera from potential impact from heavy objects.
- Do not install the camera on unstable pillars, brackets, surfaces, or walls.
- Do not use chemicals or detergents to clean the camera or housing.
- To clean, use a damp cloth.
- Only use standard tools and accessories when installing the camera equipment. The manufacturer recommends using the manufacturer’s power supply equipment or a corresponding source for the camera. Improper installation may cause damage to the product.
- Contact Bkav’s customer support or authorized Bkav agents if you experience any problems.
- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limit are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in a accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Transportation:
- Use the original packaging, or equivalent, to avoid damaging the product during transportation.
WARRANTY INFORMATION
- For information about AI View product warranty and thereto related information, go to aiview.ai/warranty.
- BKAV CORPORATION
- Address: 2nd Floor, HH1 Building, Yen Hoa Urban Area, Yen Hoa Ward, Cau Giay District, Hanoi City, Vietnam Website:www.aiview.ai
- Email:aiview@bkav.com
- Qualcomm products contained herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries.
- Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. The Made with Qualcomm Technologies logo is a trademark of
- Qualcomm Incorporated.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>