UNISTELLAR eVscope eQuinox Smart Telescope User Guide

eVscope eQuinox Smart Telescope

Quick Start Guide eVscope & eQuinox series

QUICK START GUIDE – eVscope et eQuinox

1. INSTALL

Requirements
– Avoid directly exposing the eVscope/eQuinox to wind.
– Use the eVscope/eQuinox on stable ground.
– Use the eVscope/eQuinox under a clear sky.
– Locate the eVscope/eQuinox away from direct streetlight.
– For better results, avoid a full moon.

Set up the tripod
– Open the legs of the tripod and adjust the height.
– Adjust the legs to put the bubble level within the black circle.
– Check that the tripod legs are properly secured.

Note: each time you move your eVscope/eQuinox, we recommend resetting the bubble level.

Install your eVscope/eQuinox and power it on

A – Loosen the tripod screws at the crown of the tripod.

B – Install your eVscope/eQuinox vertically on the tripod. Tighten the screws at the crown
of the tripod to secure your eVscope/eQuinox. Be careful not to tighten too hard as it may
damage the thread.

C – Start the eVscope/eQuinox by pressing the On button for 2 seconds. The LED is first
purple then red. Remove the cap covers on both the eVscope/eQuinox tube and eyepiece.

2 CONNECT

Your eVscope/eQuinox
to the Unistellar App

– Download the Unistellar App on the Google® Play Store and the Apple® App Store (on
smartphones or tablets) under the name Unistellar. The App enables you to wirelessly
control your eVscope/eQuinox with WiFi.

– Launch the Unistellar App to access your WiFi settings (or activate your WiFi on your device). The App will automatically detect your nearby instrument.

The App is not supported on FireOS devices. If you can’t download it on your smartphone,
check the operating system of your device.

3 FOCUS & TRACK

Get the right focus

– From the principal screen, click on the telescope icon.

– In order to access the control joystick of the eVscope/
eQuinox, then chose the movement option.

– To move the telescope press and drag the dot of the
joystick with your finger to point it in the direction you
want. Enjoy the live view ! You should be able to see
stars through the eyepiece and on your screen.

On your smartphone or tablet screen, adjust the focus of the eVscope/
eQuinox by turning the focus wheel located at the base of the instrument
until the image is clear.

If you are using an eVscope, adjust the focus of the eyepiece’s lens. Turn
the control knob located next to the lens until you find the best setting
for your vision.

Press the eVscope orientation button and the eVscope/eQuinox will instantly recognize
objects in its field of view.

Choose the first recommended object in the catalog of the App and hit the GoTo button, it
will take you directly to the object.

Once the telescope has reached its target, switch to the Enhanced Vision mode.

4 EXPLORE

– Visit the Catalog Tab of your app.
– For a first observation, choose from the recommended targets.
– Once you’ve selected a target, push the Go To button so that your eVscope/eQuinox points automatically toward this target. This may take up to one minute.

5 OBSERVE & ENHANCE

Observe live

– You can now enjoy a live view of the sky. However, most
targets are hardly visible in this mode.
– If the target is visible, you can center it using the joystick.
– For planets and the Moon, you should manually adjust the
settings (gain/exposure time).

– You may adjust the zoom on your smartphone screen, the
same zoom is applied in the eyepiece if applicable.

Enhanced Vision

– Turn on Enhanced Vision by pressing the button .
After a few seconds, the amplified view appears. The longer
you stay, the better it gets. Most targets are clearly visible
within the first minute.

– You can improve the quality of your observation by adjusting
the Enhanced Vision settings (located in the top-right settings
menu), then wait a few seconds for the modifications to appear
in the eyepiece.

6 PARK

After each observation, use the Park function of your eVscope/eQuinox, accessible from the «parameters/my eVscope» menu. This will
automatically move it to the zenith position and turn it off.
Replace your telescope cover and eyepiece cover before storing your eVscope/eQuinox in its backpack or in the original shipping box.

IMPROVE YOUR FUTURE OBSERVATIONS

This is just the beginning of your Unistellar adventure. Here are some tips that will continuously improve your observing experiences:

– Set your observing conditions in the Explore settings.
– Use the Live settings (gain/exposure time).
– Use the Enhanced Vision settings (contrast/brightness).
– Check and adjust the mirror alignment.
– Adjust the eyepiece’s diopter.
– Enjoy the multi-user experience by allowing your friends to connect to your eVscope/eQuinox.
– Share your observations with the community by sending us your data.
– Contribute to science by joining eVscope/eQuinox observing campaigns.

Check our user guide to learn more about the best practices for your observations including thermalization, focus adjustment, dark frames and collimation as well as the powerful technology behind the eVscope/eQuinox.

Check out our Help Center for storage tips : help.unistellar.com
Questions ? Comments ? Suggestions ?
Please send us an email at support@unistellaroptics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>