inse N5S Cordless Vacuum Cleaner User Guide

inse N5S Cordless Vacuum Cleaner

ATTENTION

5-hour fully charging before use can optimize the working performance of N5S.

To keep decent suction power, suggested to clean the filters regularly, and replace the HEPA filter when it is broken or fails to perform a proper suction.

If suction power is weakening

• Please check if there is any blockage in the dust cup or the filter.
• Please check if there is any tangle in the cleaner head.
• Please check if the rubber strap around the dust cup is fastened.
  

Maintenance

Clean Dust Bin & Filter

1. One click to empty the dustbin.
2. Wash metal filter and white mesh with cool water;
3. Clean the HEPA surface with cleaning tool.
4. Re-assemble the parts until they are completely dry.
   

Clean the Roller Brush

1. Push the buckle.
2. Take out the roller brush.
3. Clean the brush.
   After dean up, put it back to motorized cleaner head, lock the buckle.
   

Use as Stick Vacuum Cleaner

Use as Handy Vacuum

Easy To Assemble

Ready to Work

1. CHARGE
   Charge the battery fully for about 5 hours.
   

2. Press the power switch to tum it on.
   

3. Press the +/- Button to switch between High Mode and Standard Mode .
   Mode| Runtime| Surface Type
   ---|---|---
   High| ≤20Mins| Low Pile Carpet
   Standard| ≤45Mins| Hard Floor

NOTE
This vacuum can not work on high pile carpets and wet surfaces.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>