sandinrayli SY18F0213 Canvas Female Mannequin Torso W/Tripod Stand Instruction Manual
- June 9, 2024
- sandinrayli
Table of Contents
sandinrayli SY18F0213 Canvas Female Mannequin Torso W/Tripod Stand
Safety Warning:
If you do not understand these directions or have any doubt about the safety
of installation,check carefully to make sure that there are no missing or
defectiveparts.
Our customer service representatives can quickly assist you with installation
questions and missing or damage parts. Replacement parts for products purchase
through authorized.
Components:
- 1 x torso
- 1 x pine pole
- 1 x round wooden piece
- 3 x wooden leg stand
ASSEMBLY
- A. Unscrew the round piece
- B. Slide and insert the leg stand into the groove on the pole to provide support
- C. After sliding to the pole,please use round piece to keep the legs fixed
- D. Attach the body to the base with a nob you can twist to tighten or loose,similar to the triangle nut, on the base the small pole attached to the body,lock for the slider
- E. The height is adjustable from 56″ to 67″ with a triangle nut bolt discretely beneath the torso.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>