sandinrayli MR11S0247 Modern Wall Mounted Barber Cabinet Instruction Manual

sandinrayli MR11S0247 Modern Wall-Mounted Barber Cabinet

Product Information

• The product is a DIY furniture piece that requires assembly. It comes with various hardware including screws, bolts, and dowels.
  The package also includes a user manual with detailed instructions on how to assemble the product.

• The assembled product has dimensions that are not specified in the user manual. However, it can be inferred from the pictures in the manual that the product is a rectangular-shaped shelving unit with multiple levels and compartments.

• The product is made of wood or wood-based materials, which are not specified in the user manual. It is recommended to use the product indoors and avoid exposing it to moisture or direct sunlight.

Product Usage Instructions

Before starting the assembly process, check the package contents to ensure that all hardware pieces are included.

1. Start with Step 1 in the user manual. Attach hardware pieces C and G1 to Panel 4, as shown in the diagram.
2. Move on to Step 2. Attach hardware pieces C and G1 to Panel 5, as shown in the diagram.
3. In Step 3, attach hardware piece E to Panel 3. Repeat this process two more times for Panels 1 and 2.
4. In Step 4, attach hardware pieces B and E to Panels 1 and 2, as shown in the diagram.
5. In Step 5, attach hardware pieces A1, A2, and B to the bottom panel (Panel AB) as shown in the diagram.
6. Proceed to Step 6. Attach hardware pieces J1, J2, J3, N1, N2, and N3 to the back panel (Panel N). Then attach Panels 1-5 to the back panel as shown in the diagram.
7. In Step 7, attach hardware pieces M1 and M2 to the side panels (Panels 6 and 7).
8. In Step 8, attach hardware pieces C, G2, 9, 10, and 12 to Panels 4 and 5.
9. In Step 9, attach hardware pieces F1, F2, K, and L to Panels 1-3 and the top panel (Panel AB).
10. In Step 10, attach hardware pieces D, 9, 10, 11, and 12 to Panels 1-5.
11. Finally, in Step 11, attach hardware pieces A1 and A2 to the front of Panels 1-5.
12. For aesthetic purposes, in Step 12, attach hardware piece H to all exposed holes in the product.

After completing all steps, the product will be fully assembled and ready to use as a shelving unit. It is recommended to place it on a level surface and avoid overloading it with heavy items.

You need

Hardware List

PRODUC T ASSEMBLY

Check the package contents before getting started !

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

STEP 7

STEP 8

STEP 9

STEP 10

STEP 11

STEP 12

To make the product more beautiful, please paste hardware H on the exposed holes

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>