IVAN Project Pattern Nintendo Switch Leather Case Instructions
- June 9, 2024
- IVAN
Table of Contents
IVAN Project Pattern Nintendo Switch Leather Case
Printing Instruction
- The pattern is designed to be printable. We took into consideration the standard printer margin for letter and A4 sized papers.
- Seletct “US letter” or “A4” under paper size. Make sure portrait mode is selected.
- Be sure to click “scale: 100%” to ensure that the page is going to print to scale.
Recommended Leather Weight
- 1.6mm-2.Omm (4~-5oz)
Instruction
- Print out the pattern on heavy card stock & cut out the pieces.
- OPTIONAL: Dye your veg panel into desired color, allow to dry.
- Punch stitching holes and slots.
- Apply gum tragacanth on the back (rough) side, polish with glass burnisher.
- Cut out leather pieces.
- Mark 2mm wide decorative groove and round off edges with beveler.
- Apply edge color with roller and allow to dry before apply second coat.
- Secure card panel with rivets and stitch it to the case panel.
- Widen the slots with bone folder.
- Fasten magnetic snaps.
- Fold and overlap the sides and tighten screw post with screw driver.
- Complete.
PRINTABLE TEMPLATE
Measure this ruler against you own to make sure the pattern is to scale. Share
your projects with us using the hastag #IVANVIDEOMONDAY & by tagging
@ivanleathercraft on Instagram & Facebook COPYRIGHT © 2021 IVAN LEATHERCRAFT
CO., LTD. ALL RIGHTS RESERVED
NINTENDO SWITCH LEATHER CASE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>