HILTI HDI Drop-In Anchor Instruction Manual
- June 13, 2024
- HILTI
Table of Contents
HILTI HDI Drop-In Anchor
Product Information
Anchor Size (inch/mm)| Detail Bit Diameter (in.)| Std. Depth of Embed Anchor
Length (inch) Hole Depth (mm)| Useable Thread Length (inch) (mm)| Threads per
inch| Min. Base Material Thickness (inch) (mm)| Max. Tightening Torque (ft-lb)
(Nm)| Item No. of Setting Tools Hand / Auto
---|---|---|---|---|---|---|---
HDI / HDI-L| 9.5| 1 / 2 (25) / (11)| 3 / 4 (76) / (5.4)| 1 / 2 (40) / (51)|
15| 16| 3 / 1 (79) / (14.9)| 32979 / 243751
HDI / HDI-L| 15.9| 2 / (65) / (22)| 5 / 3 (130) / (50.2)| 1 / 1 (34) / (10)|
6| 8| 4 / 2 (102) / (29.8)| 32980 / 243752
Product Usage Instructions
- Ensure that the Drive Setting Tool is properly aligned with the Anchor.
- Use the Drive Setting Tool until the shoulder contacts the Anchor.
- Refer to the Specification Table above to determine the appropriate Anchor Size, Detail Bit Diameter, Std. Depth of EmbedAnchor Length, Useable Thread Length, Threads per inch, Min. Base Material Thickness, Max. Tightening Torque, and Item No. of Setting Tools Hand / Auto for your specific application.
- Follow the recommended values from the Specification Table to ensure proper installation and usage of the HDI / HDI-L product.
HOW TO USE
DETAIL
| HDI / HDI-L| HDI / HDI-L| HDI / HDI-L| HD|
HD
---|---|---|---|---|---
Anchor Size inch / (mm)| ¼”| ⅜”| ½”| ⅝”| ¾”
(6.4)| (9.5)| (12.7)| (15.9)| (19.1)
Detail
Bit Diameter in.| ⅜”| ½”| ⅝”| ²⁷⁄₃₂”| 1″
Std. Depth of Embed Anchor Lenght inch Hole Depth (mm)| 1″ (25)| 1 ⁹⁄₁₆” (40)|
2″ (51)| 2 ⁹⁄₁₆” (65)| 3 ³⁄₁₆” (81)
Useable Thread inch Length (mm)| ⁷⁄₁₆” (11)| ⅝” (15)| ¹¹⁄₁₆” (17)| ⅞” (22)| 1
⅜” (34)
Thread per inch| 20| 16| 13| 11| 10
Min. base material inch Thickness (mm)| 3″ (76)| 3 ⅛” (79)| 4″ (102)| 5 ⅛”
(130)| 6 ⅜” (162)
Max. Tightening ft-lb torque (Nm)| 4 (5.4)| 1 (14.9)| 2 (29.8)| 3 (50.2)| 8
(108.5)
Item no. of setting tools hand / (auto)| 32978 –| 32979 243751| 32980 243752|
32981 –| 32982 –
2109690-08.2023