iHeat B0B7B634MD Heated Mittens Glove User Manual

: June 15, 2024
: iHEAT

Table of Contents

Battery Instruction
- Specifications (For 1 Glove)
Package List
Safety Instruction
Operating Instruction
Cleaning Instruction
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iHeat B0B7B634MD Heated Mittens Glove

iHeat B0B7B634MD Heated Mittens Glove

Battery Instruction

Specifications (For 1 Glove)

Capacity	7.4V/3000mAh/22.2Wh
Input	8.4V/1.5A
Output	DC7.4V/2A
Dimension	6.2cm5cm1.2cm/2.4inches1.9inches0.5inches
Weight	96.5g/3.4oz

Package List

1 X HEATED GLOVES
1 X BATTERY CHARGER
2 X BAT TERIES
1 X INSTRUCTION

Safety Instruction

The heating gloves can’t be used by infants, children, people who can’t take care of themselves or anyone who is unresponsive to them, such as people with poor blood circulation.

Never use if the liner is wet.
Never touch the heating element directly to bare skin.
If you feel uncomfortable, turn off the power supply immediately.
Do NOT let the wires get pinched.
If improper operation of these gloves are observed, disconnect the battery and take off the gloves immediately, contact the service team for repair.
Do NOT use pins, it may damage the wires
Do NOT dispose of used battery packs in the household refuse or by burning them.
Do NOT store the battery pack with metal objects (short circuit risk)
Never break open battery packs and chargers, only store in dry rooms. Keep dry at all times.

Operating Instruction

A Open the battery pocket above the glove, connect the glove’s power cord with the battery, and put the battery into the pocket then zip up. (Note: Please fully charge the battery before first use. For details, please refer to” Battery Instruction” chapter).
B Press the button of gloves and hold for 2 seconds, the gloves will flash red and start warming up.
C If you want to check the remain power of battery, please press the button above the battery to check.
Heated gloves have 3-level temperature adjustable function
You can adjust the heating temperature with a short press of the button. The button will cycle from 3 lights on (high temperatures) to 2 lights on (medium temperatures) to 1 light on (low temperatures).
Under normal conditions, the high temperature range is 60-70°( (140-158°F), the medium temperature range is 50-60°( (122-140°F), and the low temperature range is 45-50°( (113-122 °F).
A Large heating zone, including palm and fingers.
B To switch on, long press the button for about 2 seconds until the 3 lights turn red. (The gloves will automatically enter the high temperature mode)
C To switch off, long press the button for about 2 seconds until the LED goes out.

Cleaning Instruction

Before cleaning, please remove the battery and take the battery out from the pocket. Put the wire inside your pocket and zip up.
Do NOT machine wash, do NOT soak in the water, do NOT use bleach, or other corrosive liquids.
Wipe clean with a dry brush or a damp sponge.
It can only be hung and dried in a dry environment.