relpol GLB Wall Charging Station Owner’s Manual
- June 13, 2024
- relpol
Table of Contents
relpol GLB Wall Charging Station
Introduction
- Mode-3 charging, AC current, Type 1 and Type 2 plugs
- For 1- and 3-phase network, TN-S, TT, IT systems
- Plug & play installation, simple and intuitive operation
- LED indicator for charger status
Construction of station
- compact housing made mainly of PVC, locked with a key
- LED indicator – reading the device status (narrow vertical strip on the front cover),
- wall mounting (standard) or assembly on a stand (on request).
Construction of station
- Mode-3 charging, continuous power supply 16 A AC or 32 A AC (1- and 3-phase network), charging power from 3,7 kW to 22 kW,
- version with built-in socket (connector Type 2),
- version with a permanently connected 5 m long cable with a plug (connector Type 1 or Type 2).
Built-in equipment
- charge controllers (for all models GLB+, open protocol OCPP 1.5/1.6 SOAP, 1.6 JSON),
- Communication – WLAN network (for selected models GLB) or LAN, 4G/3G/2.5G network (for selected models GLB+)
- electronics supporting communication between the station and the connected car,
- residual current circuit breaker (1- and 3-phase station),
- meter for local electricity metering (for selected models).
Accessories, options
- RFID card reader and Wi-Fi router – remote activation, access authorization, card/token tagging, defining charging current and availability time (for selected models),
- external digital energy meter MODBUS or RS-485 (on request),
- possibility to activate DLM – dynamic load balancing (for selected models).
Charging stations GLB, GLB+
a modern solution for home use and even more
The convenience of charging electric vehicles and plug-in hybrids is
achievable today.
The compact charging stations GLB allow BEV and PHEV vehicles to be fully
charged on your property.
The devices meet the highest safety standards and their design makes them
extremely easy to use.
An extended version of the devices GLB+ can be installed as generally
accessible stations, in accordance with the provisions of the Act of 11
January 2018 on electromobility and alternative fuels. Recommended places of
installation: garages and carports, parking lots in hotels and guesthouses,
closed public spaces, machine parks.
- Remote communication and system control
- Simplicity of usage, extensive equipment
- Economical solution
Technical data: GLB, GLB+
| Supply AC / charging | 1-phase network | 3-phase network |
|---|---|---|
| Rated load current (category AC1) | 16 A, 32 A / 230 V | 32 A / 400 V |
| Working charging current range (50 Hz) | 6…16 A, 6…32 A | 6…32 A |
| Charging power | 7,4 kW | 22 kW |
| Charging mode | Mode-3 | |
| Vehicle connection BEV or PHEV (EN 62196) | socket: connector Type 2 |
cable with plug: connector Type 1, Type 2
| socket: connector Type 2
cable with plug: connector Type 2
Installation in power grid (IEC 60364-4-41)| TN-S, TT, IT system
Built-in protection| 1-phase network| 3-phase network
Residual current circuit breaker| RCBO Type A or RCCB Type A| RCCB Type A
General data| 1-phase network| 3-phase network
Dimensions (L x W x H)| 422 x 205 x 124 mm
Weight| socket: about 3 kg
cable with plug: 3,8…4,1 kg
| socket: about 3 kg
cable with plug: 5,4 kg
Operating temperature| -25…+40 °C (-35…+55 °C storage)
Cover protection category (EN 60529)| IP 44
Degree of mechanical strength (EN 60208)| IK 08
Indicator (LEDs)| green continuous – ready to charge
green flashing – device connected to the vehicle
green fast flashing – the device is waiting for authorization (e.g. RFID card) blue flashing 3 times – charging starts
blue continuous – charging in progress red flashing – connector failure
red fast flashing – charging process interrupted
(e.g. too high temperature in the station or detection of a DC error) red continuous – protection activation
yellow flashing – engine lock slot not locked yellow red – wrong cable
Mounting (indoor / outdoor)| wall-mounted (distance from ground level to
bottom edge of charger 0,5…1,5 m) on a stand (single or double, dedicated to
the charger)
Recognitions, directives, compliance with standards| CE, RoHS, MID, IEC
61851-1, IEC 61851-22, IEC TS 61439-7, IEC 60364-7-722
Selection table: GLB, GLB+
Station| Built-in equipment| Network| RFID card reader| DC monitoring| Power
[kW]
---|---|---|---|---|---
socket (Type 2)| cable with plug (Type 2)| protection RCBO Type A
/ RCCB Type A
| meter of energy| WLAN| LAN| 4G
GLB
353579| 353582| RCBO| Modbus| yes| –| –| optional| yes| 7,4
353581 ❶| 353580 ❶| –| Modbus| yes| –| –| optional| yes| 22
353116 ❷| 353118 ❷| –| –| –| –| –| –| –| 22
353406| 353407| RCBO| Modbus| –| –| –| –| yes| 7,4
353410| 353408| RCCB| –| –| –| –| –| yes| 22
GLB+
353460 ❶| –| RCBO| Modbus| –| –| yes| yes| yes| 7,4
353463 ❶| 353462 ❶| –| Modbus| –| –| yes| yes| yes| 22
353457 ❶| 353456 ❶| –| Modbus| –| yes| –| yes| yes| 22
- The installation must be retrofitted with a residual current circuit breaker Type A (RCCB Type A).
- The installation must be retrofitted with a residual current circuit breaker Type B (RCCB Type B). In any case, the installation must be protected against the effects of short circuits and overloads.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>