QUICKLINK POWERBASE Wireless Charging Pad User Guide
- October 30, 2023
- QUICKLINK
Table of Contents
POWERBASE®
Wireless Charging Pad
QUICK START GUIDE
SPECIFICATIONS
Power: 10W
Output: 5W, 7.5W, 10W Max
Input: DC5V 2A, 9V/2A
Efficiency: 70%
Transmission distance: 8mm
Certifications: FCC, RoHS, and Qi
WHAT’S INSIDE
- Wireless Charging Pad
- Type-C Charging Cable
WIRELESS CHARGING PAD CONTROLS
- Wireless phone charging pad
- LED charging indicator
- Type-C Input
CONNECT TO POWER
Power your PowerBase by connecting the included cable to your wireless charging pad using the Type-C port and a power source. The LED light will flash BLUE three times then turn off when the PowerBase is ready for use. Wall/Car charger not included
SETUP YOUR DEVICE
Your Powerbase is designed to make charging as convenient as possible for you. To ensure proper charging takes place, please ensure your device is positioned in the correct placement on the charging pad.
START CHARGING
Place your wireless charging device on your Powerbase and look for the LED light to turn solid BLUE to indicate charging has started and will turn off when in standby.
Please note: If the LED light flashes GREEN this indicates abnormal charging. Remove your device from the Powerbase and ensure there are not any foreign objects on the wireless charging pad. Once the LED light turns off ensure it is properly placed back on the Powerbase and look for the LED light to turn BLUE to indicate normal charging.
ONE YEAR LIMITED WARRANTY
visit quikcell.com/warranty
© 2023 All rights reserved. Alphacomm, Quickly, and Powerbase are registered
trademarks of Alpha COMM Enterprises, LLC. All other trademarks are the
property of their respective owners.
Designed by Alpha COMM Enterprises, LLC at 1500 Lakes Parkway, Lawrenceville,
GA.30043.
Powerbase ®
QC-PWRBASE3-BLK
FCC ID: 2A9G4-1070Q
Alpha Comma Enterprises, LLC
1500 Lakes Parkway Lawrenceville GA 30043.
1-888-951-0909
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.