RAZER RZ19-03660100-R3M1 12 Inch LED Ring Light Installation Guide

RAZER RZ19-03660100-R3M1 12 Inch LED Ring Light

Make every impression your best and elevate your video broadcasting with the Razer Ring Light. Designed for professional PC and mobile streaming, enjoy optimal illumination that brings a studio-like quality to your setup with none of the fuss.

WHAT’S INSIDE/ WHAT’S NEEDED

WHAT’S INSIDE

• Razer Ring Light

• A. Ring light
• B. Phone/ Ball head mount socket
• C. Tripod socket
• D. Brightness adjustment buttons
• E. Color temperature button
• F. Power button
• G. USB Type-A connector

Tripod mount

• H. Ring light screw and knob
• I. Pan-adjustment hinge and knob
• J. Tilt-adjustment hinge and knob
• K. Rotator knob
• L. Height extension knob
• M. Height extension column
• N. Leg extension locks

Flexible phone mount

• Important Product Information Guide

Ball-head mount

WHAT’S NEEDED

• 5V 2.5A power adapter

LET’S GET YOU COVERED

You’ve got a great device in your hands, complete with a 1-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com.

Got a question?
Ask the Razer Support Team at support.razer.com.

TECHNICAL SPECIFICATIONNS

ATA GLANCE

• 12″ ring light for studio-quality stream lighting
• Customizable light spectrum to achieve the right tone
• Adjustable brightness for optimal light levels
• Flexible mounting options for PC and mobile streaming
• Tripod stand to fit all types of setups

BRIGHTNESS AND COLOR

• Light Source: LED SMD
• Bulbs: 192pcs
• Brightness: 500 lumens
• Dimmable: 10-100% (0% press power off
• Colors: 3000K, 4500K, 6500K (Warm White, Balanced White, Cool White)
• CRI: >80%

POWER & CONTROLS

• Controls: Physical buttons on in-cable controller for brightness and color control
• Power Source: USB Powered via PC or power bank ( PC USB port requirement 5V 2A for maximum output.)
• Total Power: 10W

BUILT

• Mounting Options: Tripod ball mount with 1/4 inch-screw Mobile phone holder
• Material:
  • Ring Light: Plastic/Metal
  • Tripod: Aluminum Alloy
• Dimensions:
  • Ring light diameter: 12″
  • Ring light Outer Diameter: 11.8″/ 30.0 cm
  • Ring light Inner diameter: 9.5″/ 24.1cm
• Weight:
  • Ring Light: 260g/0.57lbs
  • Tripod Stand: 550g/ 1.21lbs
• Tripod Height: Min 40cm/15.8in, Max 135cm /53.2in
• Mobile Holder: 7.25cm x 4.73cm x 18.75cm, Padded & expandable from 4.95cm to 8.0cm

GETTING STARTED

1. Expand the tripod mount’s legs and adjust its height by opening each leg extension lock and equally extending each leg as needed.
   Eoch leg can only be extended up to three times. When full height is not required, it’s recommended that you extend the legs from the topmost lock first.

2. Close all opened extension locks to secure the desired height and then place the tripod mount on a flat and stable surface.

3. Attach the ring light to the tripod mount and then securely fasten the ring light knob to lock it in place.

4. Attach the phone mount to the phone mount socket, insert your phone (not included) to the retractable grip and adjust its neck as needed. For more phone angle options, loosen the knob behind the grip to adjust its angle and tighten it again once the desired angle has been achieved.
   If you want to use a streaming camera (not included) with your setup, you may fasten the ball-head mount to the socket and attach your camera to the ball- head’s screw. Loosen the ball-head socket’s knob to adjust the camera’s angle as needed and fasten again to lock the desired angled in place.

5. Connect the ring light to a 5V 2.SA power adapter* and press the ring light’s power button to turn it on.

USING THE RING LIGHT

• RING LIGHT CONTROLS
• Turning ON/OFF

Press the power button to turn on or off the ring light.

Changing color temperature
Press the color temperature button to switch between warm, balanced, and cool lighting.

Adjusting the brightness
By default, the ring light is set to 50% brightness. To adjust the ring light to its maximum or lowest brightness, press the+ or – buttons to increase or decrease its brightness by steps of 10%.

TRIPOD MOUNT

Adjusting height
Loosen the height extension knob and adjust the column height as needed. Fasten the knob again to lock the desired height in place.

Changing pan and tilt angles
To change the pan and tilt angles of the tripod mount’s head, loosen the corresponding knob and adjust as needed. Fasten the corresponding knob again to lock the preferred pan or tilt angle in place.

Rotating the mount
Loosen the rotator knob and rotate the tripod mount’s head to adjust where the ring light is facing. Fasten the knob again to lock the ring light in place .

SAFETY AND MAINTENANCE

SAFETY GUIDELINES
In order to achieve maximum safety while using the Razer Ring Light, we suggest that you adopt the following guidelines:

• Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for support.
• Do not take apart the device and do not attempt to operate it under abnormal current loads. Doing so will void your warranty.
• Do not use or install the device and its components near water, moisture, solvents, or other wet surfaces, nor expose the device to high temperatures or direct sunlight for an extended period of time.

Keep the device and its components away from liquid, humidity or moisture. Operate the device and its components only within the specific temperature range of 0°c (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug the device in order to let the temperature stabilize to an optimal level.

MAINTENANCE AND USE
The Razer Ring Light requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device and clean it using a soft cloth or cotton to prevent dirt buildup. Do not use soap or harsh cleaning agents.

LEGALESE

COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
2021 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers. By Gamers.”, and “Powered by Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries.

Razer Inc. (“‘Razer”) may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Ring Light (the “Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.

LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit razer.com/warranty.

LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product.

GENERAL
These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>