Microsoft ANB-00001 Wired Keyboard for Gaming Experience User Manual

Microsoft ANB-00001 Wired Keyboard for Gaming Experience

Warning For important safety and health information, read the “Microsoft Product Guide” later in this booklet.

Setup

1. Connect the keyboard
   The connection depends on the keyboard plug and the port on your computer.

   • USB Turn on your computer and then plug the keyboard’s USB connector into a USB port on your computer.
   • PS/2 Turn off your computer and then plug the keyboard’s PS/2 connector into the PS/2 port on your computer.

2. Connect the mouse (desktop sets only)
   As with the keyboard, the connection depends on the mouse plug and the port on your computer.

   • USB Plug the mouse’s USB connector into a USB port on your computer.
   • PS/2 If you do not have a free USB port, use the USB‑to‑PS/2 adapter (some models only). Make sure the computer is turned off before making this connection.

Note: Apple/MAC computer users who are installing the Wired Keyboard 600 or Wired Desktop 600 must also download and install the IntelliType software from http://www.microsoft.com/hardware/downloads/default.mspx for the calculator hotkey to function.

Adjusting the keyboard legs

• To adjust the height of the keyboard, you can pull out or push in the legs.

Microsoft Product Guide

Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft® device that you have purchased.
Warning Failure to properly set up, use and care for this product can increase the risk of serious injury or death, or damage to the device or devices. Read this guide and keep all printed guides for future reference. For replacement guides, go to www.microsoft.com/hardware.
This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device:
Warning This symbol identifies safety and health messages in this Product Guide and other product manuals.

Important Safety Information

AC-Powered Devices
These precautions apply to all products that plug into a standard wall power outlet. Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device.

To select an appropriate power source for your device:

• Use only the power supply unit and AC power cord that came with your device or that you received from an authorized repair center.
• Confirm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualified electrician.
• Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet.
• Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit.

To avoid damaging the power cords and power supply:

• Protect the power cords from being walked on.
• Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device.
• Do not jerk, knot, sharply bend, or otherwise abuse the power cords.
• Do not expose the power cords to sources of heat.
• Keep children and pets away from the power cords. Do not allow them to bite or chew on them.
• When disconnecting the power cords, pull on the plug—do not pull on the cord.

If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time. For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions:

1. Plug the AC power cord into the power supply until it stops.
2. Plug the other end of the AC power cord into the wall outlet.

Battery-Powered Devices

These precautions apply to all products that use rechargeable or disposable batteries. Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed.

To reduce the risk of injury:

• Keep batteries out of reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in a fire.
• Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries).
• Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.
• Remove the batteries if they are worn out or before storing your device for an extended period of time.
• Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations.
• If battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush the skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup.

Disposable (non-rechargeable) batteries only:

• Caution Risk of explosion if the battery is replaced by an incorrect type. Use and replace only with the correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries.

Rechargeable batteries only:

• Caution Risk of explosion if the battery is replaced by an incorrect type. Use and replace only with the same type and rating as the batteries provided.
• Charge only with the recharger provided with the product.

Lithium button cell batteries only:

• Perchlorate Material — special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate

Headset Devices

Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. To prevent damage to your headset, avoid sitting or stepping on the headset, its cable, or the cable connector.

Webcam Devices

Webcam with magnetic and adhesive mounting. After the adhesive attachment disc has been applied to the mounting surface, removing it may damage the cosmetic coating and/or leave an adhesive residue. Applying the attachment disc next to or directly to a CRT-based display screen may cause permanent visual distortion of the displayed image near the area mounted.

Wireless Devices

Before boarding any aircraft or packing a wireless device in luggage that will be checked, remove the batteries from the wireless device or turn the wireless device off (if it has an on/off switch). Wireless devices can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed and the wireless device is turned on (if it has an on/off switch).

Keyboard and Mouse Devices

Health Warning

Use of a keyboard or mouse may be linked to serious injuries or disorders.
When using a computer, as with many activities, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. However, if you experience symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensation, or stiffness, DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED HEALTH PROFESSIONAL, even if symptoms occur when you are not working at your computer. Symptoms like these can be associated with painful and sometimes permanently disabling injuries or disorders of the nerves, muscles, tendons, or other parts of the body. These musculoskeletal disorders (MSDs) include carpal tunnel syndrome, tendonitis, tenosynovitis, and other conditions.

While researchers are not yet able to answer many questions about MSDs, there is general agreement that many factors may be linked to their occurrence, including overall health, stress and how one cope with it, medical and physical conditions, and how a person positions and uses his or her body during work and other activities (including use of a keyboard or mouse). The amount of time a person performs an activity may also be a factor.

Some guidelines that may help you work more comfortably with your computer and possibly reduce your risk of experiencing an MSD can be found in the “Healthy Computing Guide” installed with this device’s software. If this device did not come with software, you can access the “Healthy Computing Guide” at www.microsoft.com/hardware or (in the United States only) by calling 800-360-7561 to request a CD at no charge. If you have questions about how your own lifestyle, activities, medical, or physical condition may be related to MSDs, see a qualified health professional.

Devices with Laser Pointers

Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Do not stare into beam.
• Do not shine a laser pointer at anyone. Laser pointers are designed to illuminate inanimate objects.
• Do not allow minors to use a pointer unsupervised. Laser pointers are not toys.
• Do not point a laser pointer at a mirror-like (reflective) surface. A reflected beam can act like a direct beam on the eye.
• Do not disassemble the device.
• Do not use the device outside of its specified operating temperature range +41 ºF (+5 ºC) to +95 ºF (+35 ºC). If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device.

All Devices

Do Not Attempt Repairs

Do not attempt to take apart, open, service, or modify the hardware device or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify the device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

Choking Hazard

This device may contain small parts which may be a choking hazard to children under 3. Keep small parts away from children.

Usage and Cleaning

Use in accordance with these instructions: Do not use near any heat sources. Only use attachments/accessories specified by Microsoft. Clean only with dry cloth.

Keeping Cables Out of the Way of People and Pets

Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. When the product is not in use, you may need to disconnect all cables and cords from the front and rear of the product to keep them out of the reach of children and pets. Do not allow children to play with cables and cords.

Laser and LED Specifications

Caution Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Laser Devices

This device complies with International Standard IEC 60825-1:1993+A1+A2 (IEC 60825-1:2001-08) for a Class 1 and Class 2 laser product. This device also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

Class 1 Laser Devices

• Beam description: Collimated (parallel) beam of infrared light (invisible to the user)
• Laser power output : < 716 microwatts (at 832 nanometers) to 834 microwatts (at 865 nanometers)
• Emitted laser wavelength: nominal: 850 nanometers, range: (832 – 865 nanometers)

A Class 1 laser product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1 and 21 CFR 1040.10. However, it is recommended that you not direct the laser beam (which is emitted from the bottom of the device) at anyone’s eyes.

Class 2 Laser Devices

• Beam description: Collimated (parallel) beam of light
• Laser power output: < 1 milliwatt
• Emitted laser wavelength: 630 – 670 nanometers
• This optical device has no serviceable parts. The Class 2 laser beam is emitted from the front of the device.

Optical (LED) Mouse

This product has been evaluated to comply with International Standard IEC 60825-1:1993+A1+A2 (IEC 60825-1:2001-08). This product uses LEDs that are considered Class 1 (IEC 60825-1:1993+A1+A2).

• LED output power : < 67.8μW (photochemical limit), < 4.2mW (thermal limit)
• LED nominal wavelength: 470nm (blue), 635nm (red)

A Class 1 product is safe under reasonably foreseeable conditions of operation as described by IEC 60825-1. However, it is recommended that you not direct the light (which is emitted from the bottom of the device) at anyone’s eyes. This optical device has no serviceable parts.

Regulatory Information

Tested to comply with FCC (U.S. Federal Communications Commission) Standards. For home or office use. Not intended for use in machinery, medical, or industrial applications. Any changes or modifications not expressly approved by Microsoft could void the user’s authority to operate this device. This product is for use with NRTL-Listed (UL, CSA, ETL, etc.), and/or IEC/EN 60950 compliant (CE marked) Information Technology equipment. No serviceable parts are included. This device is rated as a commercial product for operation at +41 ºF (+5 ºC) to +95 ºF (+35 ºC). This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules, Canadian ICES-003, RSS-Gen, RSS-210, and RSS-310. Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Radio Frequency Technical Specifications

27 MHz Devices

• Radiofrequency (RF) output power: < 54 dBμV/m at 3 m
• Keyboard with two channels – RF frequencies: 27.095 MHz (channel 1), 27.195 MHz (channel 2)
• Keyboard with a single channel – RF frequency: 27.195 MHz or 27.095 MHz
• Mouse with two channels – RF frequencies: 27.045 MHz (channel 1), 27.145 MHz (channel 2)
• Mouse with a single channel – RF frequency: 27.145 MHz or 27.045 MHz

Bluetooth Devices

• RF output power: meets Bluetooth® requirements
• Frequency: 2,400 MHz to 2483.5 MHz

2.4 GHz Devices

Non-specific short-range device

• RF output power: Meets all SRD requirements
• Frequency: within the range of 2,400 MHz to 2,483.5 MHz

Radio and TV Interference Regulations

The Microsoft hardware device(s) can radiate RF energy. If not installed and used in strict accordance with the instructions given in the printed documentation and/or on-screen Help files, the device may cause harmful interference with other radio-communications devices (for example AM/FM radios, televisions, baby monitors, cordless phones, etc). There is, however, no guarantee that RF interference will not occur in a particular installation.

To determine if your hardware device is causing interference to other radio- communications devices, disconnect the device from your computer or remove the device’s batteries (for a battery-operated device). If the interference stops, it was probably caused by the device. If the interference continues after you disconnect the hardware device or remove the batteries, turn the computer off and then on again. If the interference stopped when the computer was off, check to see if one of the input/output (I/O) devices or one of the computer’s internal accessory boards is causing the problem. Disconnect the I/O devices one at a time and see if the interference stops.

If this hardware device does cause interference, try the following measures to correct it:

• Relocate the antenna of the other radio-communications device (for example AM/FM radios, televisions, baby monitors, cordless phones, etc.) until the interference stops.
• Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV.
• Plug the computer into a different power outlet so that the hardware device and radio or TV are on different circuits controlled by different circuit breakers or fuses.
• If necessary, ask your computer dealer or an experienced radio-TV technician for more suggestions.

For more information about interference issues, go to the FCC Web site at: http://www.fcc.gov/cgb/consumerfacts/interference.html.
You can also call the FCC at 888-CALL FCC to request Interference and Telephone Interference fact sheets.

• For Bluetooth and 2.4 GHz devices only: To comply with FCC RF exposure requirements, the following operating configurations must be satisfied: the antenna has been installed by the manufacturer and no changes can be made. The wireless devices must not be co-located or operating in conjunction with any other antenna or transmitter. Except for headsets and handheld devices, wireless devices must be at least 20 cm between the antenna of wireless device and all persons.
• For 802.11 devices only: This product is restricted to indoor use only to reduce any potential for harmful interference with licensed operation in the 5.15 to 5.25 GHz frequency range. Microsoft Corporation; One Microsoft Way; Redmond, WA 98052-6399; U.S.A. United States: 800-426-9400; Canada: 800-933-4750

Disposal of Waste Batteries and Electrical and

Electronic Equipment

This symbol on the product or its batteries or its packaging means that this product and any batteries it contains must not be disposed of with your household waste. Instead, it is your responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. For more information about where to drop off your batteries and electrical and electronic waste, please contact your local city/municipality office, your household waste disposal service, or the shop where you purchased this product. Contact weee@microsoft.com for additional information on WEEE.

Statement of Compliance with EU Directives

Hereby, Microsoft Corporation declares that this product is in compliance with the essential requirements and other relevant provisions of Directives, 2006/95/EC, 2004/108/EC and 1999/5/EC.
The technical documentation as required by the Conformity Assessment procedure is kept at the following address:
Company : Microsoft Ireland Operations Ltd.
Address: Atrium Building Block B Carmenhall Road, Sandyford Industrial Estate, DUBLIN 18
Country: Ireland
Telephone number: +353 1 295 3826
Fax number: +353 1 706 4110
Internet: http://www.microsoft.com/ireland/

Patent Information

United States and/or international patents pending.

Customer Support Options

If you have a question about your Microsoft hardware product, do the following:

• Check the system requirements for your product (located on the packaging) to ensure that your system is compatible.
• Read through all printed documentation.
• For additional product information, go to the Microsoft Hardware Web site at www.microsoft.com/hardware.
• For up-to-date help about using or troubleshooting your device, go to the Microsoft Help and Support Web site at http://support.microsoft.com.

If you still have a question, see the following Microsoft support options.
Product Name: Microsoft Hardware Devices
OEM Distributed: If this product came with a new computer or device, the hardware manufacturer provides technical support. Please contact your manufacturer directly for support.
Self-Help Support: Search our Knowledge Base, watch videos for solving common problems, and download available updates by visiting http://support.microsoft.com. Chat and E-mail: Chat immediately, or send an e-mail message to a Microsoft Support Professional by visiting http://support.microsoft.com.
Note that e-mail response may be delayed by several hours.
Phone Support: In the United States, call 866-833-7088 In Canada, call 800-876-8533
For all other regions, see the “International Technical Support Numbers” later in this section.
TTY Users: In the United States, call 800-892-5234 In Canada, call 866-857-9850
For all other regions, see the “International Technical Support Numbers” later in this documentation.
Conditions: Microsoft support services are subject to then-current prices, terms, and conditions, which are subject to change without notice. Toll charges may apply to all non-toll-free numbers listed.
Note For regional support policy details and more, go to http://support.microsoft.com/international.aspx and select your country or region from the list. If there is no Microsoft subsidiary office in your country or region, please contact the establishment from which you obtained your Microsoft product.

Limited Warranty

IMPORTANT—PLEASE READ THIS LIMITED WARRANTY CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS! The term “Hardware Device” means the Microsoft hardware product. The term “You” means either an individual or a single legal entity who will be referred to in this Limited Warranty as “You” and “Your”.

WARRANTIES.

Express Warranty. Subject to the terms and conditions of this Limited Warranty and in lieu of any other (if any) express warranties, Microsoft warrants that under normal use and service, on the date of acquisition as shown on Your receipt or similar proof of payment and for the next i) 90 days for the SOFTWARE and ii) period of time stated below for the applicable Hardware Device (hereafter each defined as the “Warranty Period”), that the SOFTWARE and Hardware Device will substantially conform with the accompanying Microsoft packaging and documentation. As to any defects discovered after the Warranty Period, there is no warranty or condition of any kind.

Warranty Period:

• Xbox 360 Accessories for Windows; Microsoft LifeChat ZX-6000: Ninety (90) day warranty.
• Microsoft LifeChat LX-2000: One (1) year LifeCam VX-500; LifeCam VX-700; Comfort Optical Mouse 3000; Compact Optical Mouse 500; Wheel Mouse Optical;
• Microsoft Wired Keyboard 200: Two (2) years IntelliMouse® Optical; Wireless IntelliMouse Explorer; IntelliMouse Explorer for Bluetooth; Wireless IntelliMouse Explorer with Fingerprint Reader: Five (5) years
• Microsoft Fingerprint Reader: Three (3) years
• Microsoft Presenter 3000: Three (3) years
• Microsoft LifeChat LX-3000: Three (3) years
• For all other Microsoft webcams (excluding the Microsoft Xbox Live Vision Camera): Three (3) years
• For all other Microsoft keyboard and mouse desktop sets: Three (3) years
• For all other Microsoft keyboard devices: Three (3) years
• For all other Microsoft mouse devices: Three (3) years This Limited Warranty does not cover, and no warranty of any kind is provided with respect to any subjective or aesthetic aspects of the Hardware Device or SOFTWARE. The express warranty stated above is the only express warranty made to You and is provided in lieu of all other express or implied warranties and conditions (except for any non-disclaim able implied warranties that exist), including any created by any other documentation or packaging. No information or suggestions (oral or in a record) given by Microsoft, its agents, affiliates or suppliers or its or their employees or agents, shall create a warranty or condition or expand the scope of this Limited Warranty. The “Governing Law; Exclusive Forum” provision of Part 2 of the Agreement applies to this Limited Warranty and is incorporated herein by this reference.

Limitation on Duration of Implied Warranties. If You are a consumer, You may also have an implied warranty and/ or condition under the laws of some jurisdictions, which is hereby limited to the duration of the Warranty Period. Some jurisdictions do not allow limitations on how long an implied warranty or condition lasts, so the foregoing limitation may not apply to You.

EXCLUSIVE REMEDY

Subject to applicable law and the following, and provided that You return the SOFTWARE and Hardware Device to Your place of acquisition (or, if that place will not accept the return, to Microsoft) with a copy of Your receipt or other bona fide proof of payment during the Warranty Period, Microsoft will, at its option and as Your exclusive remedy for breach of this Limited Warranty and any implied warranties: repair or replace all or part of the defective SOFTWARE or the defective Hardware Device; or make payment to You for the allowable damages that You incurred in reasonable reliance, but only up to the amount You paid (if any) for the SOFTWARE and/or the Hardware Device less reasonable depreciation based on actual use. The above remedy is subject to the following:

Any repaired or replaced SOFTWARE or Hardware Device will be new or refurbished or serviceably used, comparable in function and performance to the original Hardware Device (or SOFTWARE), and may include third party items; Any SOFTWARE or Hardware Device repaired or replaced under this Limited Warranty will be warranted for the remainder of the original Warranty Period or 30 days from the date of shipment of the item back to You, whichever is longer. If an upgrade to SOFTWARE is delivered with a new limited warranty, then the terms of that new limited warranty will apply only to the SOFTWARE as upgraded, but will not apply to the original Hardware Device;

You must also:

1. Submit proof of payment in the form of a bona fide, dated receipt, or invoice (or a copy) evidencing that You are the beneficiary of this Limited Warranty and that Your request for a remedy is made within the Warranty Period;
2. Follow Microsoft’s shipping and other instructions if it determines that all or part of Your Hardware Device or SOFTWARE requires return. To obtain the Limited Warranty performance, You must take or deliver the item in either its original packaging or packaging that provides an equal degree of protection to the location specified by Microsoft. Except as otherwise required by legislation in Your jurisdiction, costs associated with transport (including packaging) for warranty service shall be at Your expense.
3. Delete or remove any files or data You consider private or confidential prior to sending the item to Microsoft. Failure to follow the above instructions may result in delays, cause You to incur additional charges, or may void Your warranty.

This Limited Warranty gives You specific legal rights and You may also have other rights which vary from jurisdiction to jurisdiction. Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder of the Limited Warranty shall remain in full force and effect if its allocation of risks is not materially disturbed. Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property. Microsoft Corporation grants the purchaser of this product the right to reproduce one (1) copy of this user manual for each Hardware Device you purchased in the package. © 2009 Microsoft Corporation. All rights reserved. Microsoft, IntelliEye, IntelliMouse, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are property of their respective owners.

Are wired keyboards better for gaming?****

Because of the direct connection, wired keyboards are ideal for individuals who intend to stream or game. These keyboards have excellent responsiveness and are not susceptible to interference. You can play with confidence knowing that every keypress will be registered quickly.

Is there anything special about gaming keyboard?****

When speed is a priority, gaming keyboards’ quick reaction times can provide players the advantage they need. Response times on quick gaming keyboards may be counted in milliseconds.

Are wired keyboards more responsive?****

You won’t ever have to worry about your keyboard dying in the midst of a game since wired gaming keyboards don’t rely on batteries. They also feel that the keys are more responsive, which might be significant for some players, especially those who play first-person shooter games.

Why is it good to have a gaming keyboard?****

Because a mechanical keyboard can detect when a key is only partially depressed, you can type more quickly. This can significantly affect your efficiency when several presses are added up over the course of a game.

Do wired keyboards have input lag?****

Due to their direct connection to the computer, wired keyboards often have lower latency than wireless keyboards. Yet recently, wireless technology has advanced to the point where there isn’t much of a difference in latency between a wired keyboard and a wireless keyboard utilizing its USB receiver.

Are wired keyboards more secure than wireless?****

For security against remote access or disclosure, cable often outperforms wireless. If one can decode the signals, wireless devices can be sniffed, and code may be inserted. A wired device offers a physically constrained channel since you cannot limit the range of radio transmissions.

What is the use of wired keyboard?****

A wired keyboard has a connection between it and your computer. A USB connector at the end of the cable connects to a USB port on your computer. There is really nothing that could go wrong with this direct connection because wired keyboards are so dependable.

Are wired keyboards faster?****

Wireless keyboards are not as fast as cable keyboards. Due to their increased input lag and latency, bluetooth keyboards are typically substantially slower than cable keyboards.

How do wired keyboards connect?****

Attach the USB keyboard plug to the USB ports on the back or front of your computer. It can also connect to a USB hub if you’re using one. Nonetheless, if at all feasible, we advise a direct connection to the computer’s back.

Why is my wired keyboard not typing?****

Switch on the computer. Reconnect the computer’s keyboard. Use a port on the computer rather than a USB hub if the keyboard has a USB connector. If the keyboard doesn’t work with the first port you tried, try another one.

Download the PDF Link;Microsoft Wired Keyboard for Gaming Experience pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>