ResMed ClimateLineAir 11 Oxy Heated Tube User Guide
- June 9, 2024
- ResMed
Table of Contents
ResMed ClimateLineAir™ 11 Oxy Heated Tube User Guide
About the ClimateLineAir 11
CAUTION
In the US, Federal law restricts this device to sale by or on the order of a physician.
Intended use
The ClimateLineAir 11 is a heated breathing tube that delivers air to a compatible mask. It is intended for home and hospital use.
When used with the device humidifier, ClimateLineAir 11 heated air tubing allows you to use the Climate Control feature.
Please read this entire user guide together with your device user guide before using your ClimateLineAir 11 heated air tubing.
Notes:
- Not all types of air tubing are available in all regions.
- The ClimateLineAir 11 is the only heated tubing that is compatible with the AirSense 11 device.
Setting up
To set up the device and tubing:
- Make sure the device is connected and turned on.
- Hold the cuff of the heated air tubing and line up the heated air tubing with the outlet connector at the rear of the device.
- Push the cuff firmly into place. ClimateLine connected will briefly display on the device screen.
- Connect the assembled mask to the free end of the heated air tubing.
Note: The electrical connector end of the heated air tubing is only compatible with the air outlet at the device end and should not be fitted to the mask.
Device Settings
Climate Control
Climate Control is designed to make therapy more comfortable by enabling constant temperature and maintaining humidity.
This feature:
- delivers comfortable humidity level and temperature during therapy
- maintains the set temperature and relative humidity during sleep to prevent dryness in the nose and mouth
- can be set to either Auto or Manual
- is only available when both the ClimateLineAir 11 and HumidAir 11 tub are attached.
Climate Control – Auto setting
Auto is the recommended and default setting. It is designed to make therapy as easy as possible so there is no need to change the temperature or humidity settings.
- Sets the tube temperature to Auto (80ºF/27ºC). If the air in the mask is too warm or too cold, you can adjust the tube temperature to anywhere from 60 to 86ºF (16 to 30ºC) or turn it off completely
- Adjusts the humidifier output to maintain a constant, comfortable humidity level of 85% relative humidity
- Protects against rainout (water droplets in the heated air tubing and mask).
Climate Control – Manual setting
Manual is designed to offer more flexibility and control over settings and offers the following:
- Temperature and humidity can be adjusted to find the most comfortable setting
- Temperature and humidity level can be set independently
- Rainout protection is not guaranteed. If rainout does occur, first try increasing the tube temperature
- If the air temperature becomes too warm and rainout continues, try decreasing the humidity.
Note: If Climate Control is set to Manual , the Auto Tube Temperature setting is not available.
Humidity Level
The humidifier moistens the air and is designed to make therapy more comfortable.
- If you are getting a dry nose or mouth, turn up the humidity
- If you are getting any moisture in your mask, turn down the humidity.
- You can set the Humidity Level to Off or between 1 and 8, where 1 is the lowest humidity setting, and 8 is the highest humidity setting.
To update the settings for Tube Temperature , Climate Control , or Humidity Level , tap MY OPTIONS from the Home screen, go down the list of options, and select the setting. Refer to your device user guide for more information on how to update the device settings.
Cleaning and caring for your tubing
WARNING
Clean the device and its components according to the schedules shown in this guide, to maintain the quality of the device and to prevent the growth of germs that can adversely affect your health.
CAUTION
- Do not use bleach, chlorine, or aromatic-based solutions, moisturizing or antibacterial soaps or scented oils to clean the device, the humidifier tub or air tubing. These solutions may cause damage or affect the humidifier performance and reduce the life of the products. Exposure to smoke, including cigarette, cigar or pipe smoke, as well as ozone or other gases, may damage the device. Damage caused by any of the foregoing, will not be covered by ResMed’s limited warranty.
- If any visible deterioration of a system component is apparent (cracking, discoloration, tears etc.), the component should be discarded and replaced.
Disconnecting
- Pinch the cuff of the air tubing, and gently pull it away from the device.
- Hold both the cuff of the air tubing and the swivel of the mask, then gently pull apart.
Note: Only hold and pull the cuff of the air tubing. Do not hold or pull the tubing itself as it may cause damage.
Cleaning
The following instructions are for home cleaning. Instructions for reprocessing devices intended for multi-patient re-use can be found in the clinical guide.
You should clean the air tubing weekly as described.
- Wash the air tubing in warm water using a household dishwashing liquid. It should not be washed in temperatures higher than 131ºF (55ºC). Do not wash in a dishwasher or washing machine.
- Rinse the air tubing thoroughly in water.
- Allow to dry out of direct sunlight and/or heat.
Checking
You should regularly check the air tubing for any damage. If there are any holes, tears, or cracks, you should replace it.
Reassembly
When the air tubing is dry, you can reconnect it to the device.
- Connect the air tubing firmly to the air outlet located on the rear of the device.
- Connect the free end of the air tubing firmly onto the assembled mask.
Troubleshooting
If you have any problems, refer to the troubleshooting section of your device user guide or www.resmed.com.
For any serious incidents that occur in relation to this device, these should be reported to ResMed and the competent authority in your country.
Technical specifications
Note: The manufacturer reserves the right to change these specifications without notice.
Resistance to flow
The table illustrates the resistance to flow of the air tubing:
Symbols
Temperature limitation.
Humidity limitation.
Operating altitude.
Atmospheric pressure limitation.
Manufacturer.
Catalog number.
Device number.
Serial number.
Batch code.
Prescription only (In the US, Federal law restricts these devices to sale by or on the order of a physician).
European Authorized Representative.
Importer.
Medical device.
See symbols glossary at ResMed.com/symbols.
Environmental information
This device should be disposed of separately, not as unsorted municipal waste. To dispose of your device, you should use appropriate collection, reuse and recycling systems available in your region. The use of these collection, reuse and recycling systems is designed to reduce pressure on natural resources and prevent hazardous substances from damaging the environment.
If you need information on these disposal systems, please contact your local waste administration. The crossed-bin symbol invites you to use these disposal systems. If you require information on collection and disposal of your ResMed device please contact your ResMed office, local distributor or go to ResMed.com/environment.
Limited warranty
Refer to your device user guide.
Further information
If you require additional information on how to setup, use or maintain the Air11™ system (including ClimateLineAir 11 heated tubing), or to report unexpected operation or events, please contact the ResMed Service Centre or your care provider.
ResMed Pty Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia
See ResMed.com for other ResMed locations worldwide. Air11, AirSense, ClimateLine, ClimateLineAir and HumidAir are trademarks and/or registered trademarks of the ResMed family of companies.
For patent and other intellectual property information, see ResMed.com/ip
© 2021 ResMed. 398131/1 2021-07
ResMed.com
Documents / Resources
|
ResMed ClimateLineAir 11 Oxy Heated
Tube
[pdf] User Guide
ClimateLineAir 11 Oxy Heated Tube, ClimateLineAir 11, Oxy Heated Tube, Heated
Tube, Tube
---|---
References
- Environmental policy - ResMed
- ResMed.com/symbols
- Sleep apnea and COPD - learn about symptoms and treatment | ResMed
- Environmental policy - ResMed